4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

CA Glue (medium) 20g
CA Glue (medium) 20g

temporarily out of stock
temporarily out of stock

Conector BEC male (10 pcs)
Conector BEC male (10 pcs)

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x SIMtransmitter 6 Mode 2
1 x Liston HAYA 10 x 10 x 1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
2 x BALSA trip 5.0x5.0x1000 mm
2 x Pine wood slat 3.0x10.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x BALSA triangular 6x6x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
2 x BALSA trip 6.0x6.0x1000 mm
3 x Interface Realflight Simulator
2 x EasyFLY Addon
3 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x RF9 Flight Simulator with Spektrum Controller
1 x Slave-cable USB Easy Sim
2 x Ventus 1:4 set of instruments
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Vacuum bag, 1200 mm x 50 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Connectors banna oro 8,0 mm (M/F)
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Red smoke canister 100 g
1 x Pine wood slat 10x10x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Beech dowels 10 mm x 1000 mm
2 x BALSA trip 2.0x2.0x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x Mini neumatic retract landing gear
1 x Balsa panel 5.0x100x1000 mm
1 x Balsa panel 2.0x100x1000 mm
1 x Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x Birch plywood plate 600x300x2.0 mm
1 x Soporte filtro FESTO (4 pcs)
1 x BALSA leading edge 8x10x1000 mm
1 x Balsa panel 2.5x100x1000 mm
1 x Balsa panel 6.0x100x1000 mm
1 x quality beech plywood BIRCH 600x300x2.0 mm
1 x Retract undercarriage for gliders up to 2 Kg
1 x A/C quality beech plywood 600x300x0.6 mm
1 x Quick hose connector 4-4 mm
1 x 5 mm Prop Adapter M8
1 x Axle wheel with accesories
1 x DPSI LR-S (with push buttons)
1 x 3.2 mm Prop Adapter M6
1 x Filter Capacitor JR
1 x 6 mm Prop Adapter M8
1 x FEMA DEFLECTOR LEVER FOR WHEEL BRAKE,
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x Optotronix X-Carrier
1 x Fail Safe air retract
1 x T-Hose connector 3-3-3 mm
1 x Quick hose connector 3-3 mm
1 x T-Hose connector 4-4-4mm
1 x 3.2 mm Prop Adapter M8
1 x Body for landing gear Ø 4 mm
1 x 2 mm Prop Adapter M6
1 x OPTOTRONIX Aurora LCU
1 x Wheel cover holder Ø 4 mm (2 uds)
1 x 3.17 mm Prop Adapter CN-Spinner
1 x Tap FESTO 6-6 mm
1 x Z-shaped servo mount
1 x DUPLEX 2.4EX Central Box 210
1 x DUPLEX 2.4EX Central Box 220
1 x 10 mm Prop Adapter M12
2 x Servo arm with 6 mm hole to FEMA 9800A
1 x Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x Brazo servo MKS X8 Metal L:1.25/1.5 inc
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x Propeller diller for DA50, DLE55 red
1 x 50 mm servo arm with bearing (2 pcs)
1 x 46 mm Futaba servo arm tandem with ball link
1 x HITEC 17 mm servo arm with ball link HITEC
1 x Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x SERVO DES 568 MG
1 x Servo SAVOX SV-1260 MG
1 x 3,9 mm ZG20-ZG38 servo arm
1 x 89 mm double servo arm with bearing (2 pcs)
1 x Savox Brushless Servo SB-2271SG
1 x 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
1 x Servo SAVOX SB-2290 SG
1 x Gear for D 200 BX
1 x Servo Robbe FS 128 BB MG HV Digital
1 x Servo MKS HV6130
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x SERVO DES 707 BB MG, Pignons
1 x Servo safety connector (10 pcs)
1 x Servo TOPMODEL STANDARD S3217
1 x Hitec 25 mm servo arm with M3 ball link
1 x Servo SAVOX SV-1270 TG
1 x Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x Hitec 25 mm servo arm with ball link
1 x Servo SAVOX SA-128S SG
1 x Sparkplug Saito 400
1 x Servo KST X20-7512 V8.0 82kg 8.4v
1 x Futaba 2x20 mm servo double arm
1 x Sparkplug DLE CM6
1 x Servo KST X15-1208 V8.0 13.5Kg HV
1 x DA 85 / DA 100 / DA 100 L carburetor
1 x Hose clips 6 mm
1 x Sparkplug Champion RCJ-7Y for ZG
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x Servo arms set 40/50/55/5055 MG
1 x MIG 29 3D RTF, Servo
1 x Servo SAVOX SV-1261 MG
1 x Servo MKS 6100 DS
1 x 40 mm servo arm with bearing (2 pcs)
1 x Servo TT ACE SHV 1504 MG
1 x Servo TOPMODEL DS1413 T
1 x 2 mm Prop Adapter M5
1 x Futaba 17 mm servo arm with ball link HITEC
1 x 90x75 mm standart servo cover
1 x Futaba 25 mm servo arm with M3 ball link
1 x Hitec 20 mm servo arm
1 x Soporte servo KST X10 mini / DS135MG
1 x Spark motor OS nº 8
1 x DLA 116 crankshaft
1 x Servo KST X06H - 1.8Kg.cm 7mm 6g
1 x SERVO DES 588 BB MG
1 x Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x Blue aluminium servo arm V2-Hitec 1,25 inch M3
1 x Gold aluminium servo arm V2-JR 1,0" inch M3
1 x Servo FUTABA BLS172 SV
1 x Servo FUTABA BLS 272SV
1 x Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x Gold aluminium servo arm V2-JR 1,5" inch M3
1 x Flap hinge (6 pcs)
1 x Birch plywood plate 600x300x1.2 mm
1 x Canopy Latch
1 x Flap hinge 33x9 mm (6 pcs)
1 x Decorative caps, multicoloured, short
1 x Mini Infrared Thermomiter
1 x Foam plastic plates (310x210x2 mm)
1 x Receiver replacement antenna, approx. 15
1 x Aluminium sheet 500x250x0,5mm
6,131.78EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies