Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Bucker Bu-133 Jungmeister #69 2540 mm ( CY Model)
1,299.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Ferrita 17x10x6.5 mm
1 x	Ferrita con funda
1 x	Ferrita 27x14x7 mm
1 x	Arandela conica alumino M3 verde (8 pcs)
2 x	Circlick para eje 1.2 mm (10 pcs)
1 x	Circlick para eje 1.5 mm (10 pcs)
2 x	Arandela dentada 2.7 mm (20 pcs)
3 x	Arandela conica alumino M3 azul (8 pcs)
1 x	Arandela abierta 3.1 mm (20 pcs)
2 x	Arandela conica ancha alumino M3 oro (4 pcs)
1 x	Arandela abierta 2.1 mm (20 pcs)
2 x	Arandela dentada 2.2 mm (20 pcs)
2 x	Arandela conica alumino M3 rojo (8 pcs)
2 x	Arandela 3.2 mm (20 pcs)
1 x	Arandela abierta 4.1 mm (20 pcs)
2 x	Arandela 4.3 mm (20 pcs)
3 x	Circlick para eje 2.3 mm (10 pcs)
1 x	Arandela M3 negra (4 pcs)
3 x	Arandela 2.7 mm (20 pcs)
1 x	Arandela 1.7 mm (20 pcs)
1 x	Arandela conica alumino M4 verde (8 pcs)
2 x	Arandela conica alumino M4 rojo (8 pcs)
2 x	Arandela de bloqueo 1.5 mm (10 pcs)
1 x	Arandela de bloqueo 3 mm (10 pcs)
1 x	Sensor digital Air Speed con Pitot
1 x	PIX Hawk con accesorios
1 x	Varilla ABS 1,25x1000 mm
1 x	Liston ABS 1,0x3,0x1000 mm
1 x	Varilla ABS 2,0x1000 mm
1 x	Liston ABS 1,5x8,0x1000 mm
2 x	Liston ABS 1,5x2,0x1000 mm
2 x	Varilla ABS 4,0x1000 mm
2 x	Varilla ABS 1,0x1000 mm
1 x	Liston ABS 1,5x6,0x1000 mm
1 x	Varilla ABS 6,0x1000 mm
1 x	Liston ABS H 1,5x1,5x330 mm
2 x	Varilla ABS 1,5x1000 mm
1 x	Cable carga emisora GRAUPNER
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Piloto "Anthony" (Slimline)
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Varilla carbono 1.5 mm x 2000 mm
1 x	Horn de mando 6/27 con rótula M3
1 x	Listón de PINO 2,0x10,0x1000 mm
1 x	Anemometro Xplorer3
1 x	Cartucho de humo Amarillo 140 g
1 x	Varilla acero Ø 1,2 mm x 1500 mm
1 x	Bisagra de compuerta negra 30x16 mm (2 pcs)
1 x	Bisagra 25 mm reforzada
1 x	Conector banana oro 6,0 mm Ultralight (pareja)
1 x	Arandela conica ancha alumino M4 Azul (4 pcs)
1 x	Arandela de bloqueo 4 mm (10 pcs)
1 x	Soporte conector MPX empotrado (6 pcs)
1 x	Tornillo allen M3x8 (10 pcs)
2 x	Microbalones 100g (0.20g/cm3 - Aprox 1L)
1 x	Soporte conector XT-60 (2 pcs)
2 x	Círculo autoadhesivo 10 mm (72 pcs)
2 x	Arandela de bloqueo 3.5 mm (10 pcs)
1 x	Tornillo M1,6x6 (10 pcs)
3 x	Tuerca autoempotrable M5 (4 pcs)
1 x	Tornillo M4x0,7x20 mm Cabeza Plana alum. anodizado azul (4 pcs)
1 x	Tornillo allen M3x20 (10 pcs)
2 x	Tornillo M2.9x13 (10 pcs) Especial cabinas, tapas servos
1 x	Arandela de bloqueo 2 mm (10 pcs)
1 x	Tornillo M2x12 mm aluminio (4 pcs)
2 x	Soporte tubo Ø 6mm (10 pcs)
2 x	Tornillo cabeza boton M4x12 mm (5 pcs)
2 x	Microbalones (0,12 g) 350 ml
2 x	Microbalones 120g (0.19g/cm3 - Aprox 1L)
1 x	Bancada Aluminio set radial motor A60-V2
1 x	Tuerca autoempotrable M3 (4 pcs)
2 x	Instrumentos individuales 1/4 Planeador
1 x	Arandela de goma M3-M4 (8 pcs)
1 x	Arandela conica alumino M3 negro (8 pcs)
1 x	Tornillo allen M3x16 (10 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Arandela 2.2 mm (20 pcs)
1 x	Tornillo allen M2x12
1 x	Tornillo Servos M4x5/8 aluminio anodizado azul (4 pcs)
3 x	Tornillo M2.2x13 (10 pcs) Especial cabinas, tapas servos
1 x	Tornillo allen M2.5x8 (10 pcs)
1 x	Tuerca autoblocante M5 (20 pcs)
2 x	Tuerca para insertar M6 (10 pcs)
1 x	Tuerca para montaje M4 (4 pcs)
1 x	Liston ABS I 20x10x1000 mm
1 x	Liston ABS H 2,0x2,0x330 mm
1 x	Varilla ABS 3,0x1000 mm
1 x	Liston ABS 1,0x2,0x1000 mm
1 x	Liston ABS 2.0x8.0x1000 mm
1 x	Adaptador de hélice 3.2 mm M6
1 x	Accesorios SCHARNHORST
1 x	Acorazado SCHARNHORST 1:200
1 x	Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x	Adaptador de hélice 2,3 mm M6
1 x	Aero-Master Alas (Aero-naut)
1 x	Adaptador prision. 6 mm/M8 "long" 35 mm
1 x	Adaptador prision. 5 mm/M8 "long"
1 x	Adaptador de hélice 3,2 mm M6
1 x	Adaptador de hélice 3 mm M6
1 x	Adaptador de hélice 3 mm M6
1 x	Adaptador de hélice 10 mm M12
1 x	Ametralladora MG 1,8 cm (5 pcs)
1 x	Aero-Master Cabina (Aero-naut)
1 x	Adaptador de hélice 5 mm M8
1 x	Adaptador de hélice 5 mm CN-Spinner
1 x	Accesorios La Capitania di Venetia
1 x	Adaptador de 2,3 mm para conos de 30 mm
1 x	Adaptador de hélice 4 mm M8
1 x	Adaptador de hélice 5 mm M6
1 x	Adaptador de hélice 4 mm CN-Spinner
1 x	Adaptador de hélice 2,3 mm M6
1 x	Adaptador de hélice 4 mm M8
1 x	Adaptador prision. 8 mm/M12 "long"
1 x	Adaptador de hélice 2 mm M6
1 x	Adaptador de hélice 6 mm M8
1 x	Aero-Master Fuselage (Aero-naut)
1 x	Aero-Master (Aero-naut)
1 x	Adaptador de hélice 6 mm M8
2 x	Adaptador para motor A60-V2
1 x	Soporte bomba Xicoy X45
1 x	Soporte ECU Xicoy X-45
1 x	Catapulta Vasa model
1 x	Perforador hélices DLE170
3 x	Bungee HLG Premium
1 x	Polvo de algodon 7 Kg
3 x	Pasador Ø 2 x 6 mm (10 pcs)
1 x	Tornillo M3x0,5x8 mm Cabeza Plana Titanio (4 pcs)
1 x	Tornillo M4x0,7x20 mm Cabeza Plana alum. anodizado lila (4 pcs)
1 x	Tuerca autoempotrable M2 (10 pcs)
1 x	Hélice 10x4,7 SlowFlyer
1 x	Tuerca hexagonal M4 (20 pcs)
1 x	Brazo servo aluminio V1-Futaba 1,0" M2 rojo
1 x	Bancada servo tandem 4-4,5" para 2 servos
1 x	Brazo servo aluminio V1-Hitec 1,0" M2 azul
1 x	Bancada servo tandem 3-3,5" para 2 servos
1 x	Tuerca autoblocante M3 (10 pcs)
1 x	Circlick para eje 3.2 mm (10 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Tacometro mini encendidos RCEXL
1 x	Perforador helices DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-50/
1 x	Galgas motor 0.05 - 1.0 mm
1 x	Adaptador para motor A50-V3
1 x	Perforador hélices para EME35 y DLE35
1 x	Thixotropic agente tin/15g (aprox. 350 ml)
1 x	Conector ala MPX 8 pines con conector M/H
1 x	Servo NARO Max Std
1 x	Microbalones (0.12g) 400 g (aproxx 3.3 l)
1 x	Polvo de algodon 500g
1 x	Recambio lonas Hovercraft
1 x	Bateria arranque incl. compresor inflado
1 x	Thixotropic agente TM100, tin/75g (aprox. 1 L)
1 x	Fibra carbono molida 100g
1 x	Thixotropic agente TM100, tin/415g (aprox. 5 L)
1 x	Tornillo M4x0,7x20 mm aluminio anodizado azul (4 pcs)
1 x	Tuerca para montaje M2 (4 pcs)
1 x	Tornillo allen M2,5x12
1 x	Tornillo Servos M4x5/8 aluminio anodizado lila (4 pcs)
1 x	Tornillo nylon M6x40
1 x	Tuerca para insertar M4 (4 pcs)
1 x	Tuerca para insertar M5 (10 pcs)
1 x	Tornillo M3x0,5x20 mm Cabeza Plana alum. anodizado azul (4 pcs)
1 x	Tornillo Servos M4x5/8 aluminio anodizado rojo (4 pcs)
1 x	Tuerca para montaje M3 (4 pcs)
1 x	Tuerca autoblocante M5 (10 pcs)
1 x	Tornillo M2x6 (10 pcs)
1 x	TWIST planeador gomas

3,638.13EUR