1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
2 x SERVO DES 707 BB MG
2 x SERVO DES 806 Piñones
1 x e-Looger V3
1 x Tubo Pitot para PIXHAWK
3 x Servo SAVOX SV-1254 MG HiVolt Low Profile
2 x Servo SAVOX SB-2271 SG
1 x Brazo servo DOBLE Savox SH-81 aluminio
1 x SERVO DES 568 MG
1 x SERVO DES 588 BB MG
2 x SERVO DES 707 BB MG, Piñones
3 x Servo SAVOX SV-1270 TG
3 x Servo SAVOX SB-2270 SG Highvoltage brushless
3 x Servo SAVOX SV-1260 MG
3 x Servo SAVOX SV-1261 MG
2 x Servo SAVOX SC-1267 SG
2 x Servo SAVOX SB-2272 SG Highvoltage brushless (Rotor de cola)
1 x Modulo PPM Encoder
2 x Servo SAVOX SC-1251 MG
1 x Servo SAVOX SH 1290 MG digi
2 x Servo SAVOX SW-1250 MG digi
4 x Servo SAVOX SH 0254
1 x Soporte metal para servos
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Rótula metálica M3/3 azul (2 pcs)
1 x Monokote AZUL metalizado (1.8x0.65m)
1 x Termo-retráctil negro tubo de 1,2x1000 mm 2:1
1 x Bisagra de nylon flaps 33x9 (2 pcs)
1 x Plancha ABS 500 x 400 x 1,5 mm (blanco)
1 x Silicona adhesiva ELASTOSIL E4 tube 90ml
1 x Soporte Pitot JETI
1 x SERVO DES 658 BB MG
3 x Servo SAVOX SH 0257 MG
1 x Resina Epoxy L-385 (1250 g)
1 x Resina Epoxy L (2.5 Kg)
1 x Resina Epoxy L-385 con catalizador H385 (7 kg total)
2 x Resina Epoxy L + Hardener CL (60 min) kit/930g
1 x Servo TT ACE SHV 1504 MG
1 x Servo SAVOX SH 1250 MG digi
1 x Servo SAVOX SH 0255 MG
2 x Piñones SAVOX SH-0350
2 x Bancada servo SAVOX SV-1260MG
1 x Recambio lonas Hovercraft
1 x Bancada aluminio servo (2 uds)
1 x Brazos carbono para HITEC HS 65 (4 pcs)
1 x Servo SAVOX SV-0236 MG HV
2 x Servo SAVOX SV-1273 TG
1 x Servo SAVOX SA-1283 SG
2 x Servo SAVOX SA-1256 TG
1 x Servo SAVOX SA-1258 TG
1 x Helice APC 10x5.5 MR Electric multirrotor
1 x Helice APC 11x8.5 Electric
2 x Cono 42 mm EXTRA 330SC
1 x Helice APC 12x8 Electric
1 x Helice APC 12x6 Electric
1 x Helice APC 13x6,5 Electric Pusher
1 x Helice APC 10x10 Electric
2 x Helice APC 11x4,5 Electric Pusher
1 x Helice APC 11x7 SF
1 x Helice APC 12x6 SF
1 x Helice APC 10x7 Electric
1 x Helice APC 12x3.8 SF
1 x Helice APC 10x6 Electric
1 x Helice APC 11x3.8 SF
1 x Helice APC 11x4.7 SF Pusher
1 x Helice APC 13x10 Electric
2 x Helice APC 11x4.7 SF
1 x Resina Epoxy L-385 (625 g)
1 x Fox 4000 mm (Airwold)
1 x Gobe R-26S (Airwold)
1 x Juntas carburador MOKI
1 x Motor Moki S 300 cc 5 cilindros
1 x Bateria arranque incl. compresor inflado
1 x PIX Hawk con accesorios
1 x Sensor digital Air Speed con Pitot
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x Pines alineamiento Ø 8 mm-2 pats (100 pares)
1 x Servo SAVOX SB-2290 SG
1 x Kobuz 5000 mm (Airwold)
1 x DG-303 ACRO 3750 mm, winglets
1 x Motor Moki S 250 cc 5cyl con autoarranque
1 x DG-303 ACRO 3750 mm, cabina
1 x Motor Moki 100 BVT
1 x Filtro aire MOKI
1 x Fox 4000 mm con flpas (Airwold)
1 x Varilla empujador MOKI S250 (1 pcs)
1 x ASW 15 5000 mm (Airwold)
1 x Bancada servo ala 13 mm
1 x Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x Brazo servo Savox SH-82 aluminio
1 x Controlador autoarranque MOKI S250
1 x Helice APC 11x7 Electric
23,251.97EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas