130.00EUR

Gafas FPV Eachine EV800D
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP
A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


pocas unidades
pocas unidades

Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Arandela de bloqueo 3 mm (10 pcs)
1 x Cierre cabina tipo FOX MDM1 4m (1 par)
1 x Arandela dentada 2.2 mm (20 pcs)
1 x Varilla carbono 6.0 mmx1000 mm
1 x Cable pull pull SUS 3m + cierres
1 x Arandela conica alumino M3 azul (8 pcs)
1 x Abrazadera 2.5x100 (20 uds)
1 x Cable acero trenzado Ø 0,5 mm (2 m)
1 x Varilla carbono 7.0 mmx1000 mm
1 x Cierre cabina V1 M3 Azul (2 pcs)
1 x Arandela 1.7 mm (20 pcs)
1 x Arandela de bloqueo 3.5 mm (10 pcs)
1 x Varilla carbono 8.0 mmx1000 mm
1 x Cable acero trenzado Ø 0.88 mm - 60 kp (10 m)
1 x Varilla carbono 1.5 mm x 1000 mm
1 x Brazo direccional 16 mm Ø 3 mm ( 2 uds)
1 x Arandela abierta 2.6 mm (20 pcs)
1 x Varilla carbono 3.0 mm x 1000 mm
1 x Arandela 3.2 mm (20 pcs)
1 x Arandela conica ancha alumino M4 Negro (4 pcs)
1 x Cierre cabina "One touch"
1 x Brazo direccional 12 mm Ø 4 mm
1 x Varilla carbono plana 1000 x 5.0 x 1.0 mm
1 x Anclaje varilla mando Ø 2 mm prisionero/circlick (2 uds)
1 x Arandela de bloqueo 2 mm (10 pcs)
1 x Arandela conica alumino M4 rojo (8 pcs)
1 x Arandela 4.3 mm (20 pcs)
1 x Acople ALU M2,5 Ø 4 (2 uds)
1 x Acople ALU M2 Ø 4 (2 uds)
1 x Listón de PINO 2,0x2,0x1000 mm
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Listón de PINO 6,0x6,0x1000 mm
1 x Borde Salida BALSA 35x8x1000 mm
1 x Listón de TILO 3,0x3,0x1000 mm
1 x Acoplador Micro M2 Ø 0,8 mm (10 pcs)
1 x Liston de BALSA 2,0x10,0x1000 mm
1 x Muñeco Operario 1:32
1 x Horn metálico ajustable rosca M3
2 x Adaptador JST-XH
1 x Antena RX 150 mm HoTT
1 x Hélice 44,0 mm (hélice izquierda)
1 x Plancha de goma espuma (310x210x2 mm)
1 x Extensión escape motor OS 120 AX
1 x Plancha aluminio 500x250x0.5 mm
1 x Gafas FPV Eachine EV800D
1 x Ball link aluminio M3 V1 azul (10 pcs)
1 x Acople ALU M3 Ø 6 (2 uds)
1 x Ball link ALU M2/2 con rodamiento (1 pcs)
1 x Listón de PINO 3,0x5,0x1000 mm
1 x Acople ALU M3 Ø 5 (2 uds)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Liston de BALSA 10 x 10 x 1000 mm
1 x Ball link aluminio M3 V1 (10 pcs)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Listón de HAYA redondo 4,0 x 1000 mm
2 x Listón de TILO 2,0x2,0x1000 mm
1 x Varilla mando doble roscada duraluminio M3 110 mm (2 pcs)
1 x Eje ruedas Ø 4 mm (2 uds)
1 x Bancada servo gancho
1 x Pin Ø 1,6 mm para Kwik link MPJ2150/2157 (6 pcs)
1 x Soporte del rodamiento frontal LA500
1 x Carena delantera LA500
1 x Tubo de latón (L 1000 mm, Ø8,0 mm, Ø7,1 mm
1 x Bisagra de Flaps 33x9 mm (6 uds)
1 x Servo HBS 690BB HV Digital
1 x SERVO DES 568 MG
1 x Listón de NOGAL 3,0x3,0x1000 mm
1 x Terminales riostras M3 (10 uds)
1 x Listón de HAYA redondo 2,0 x 1000 mm
1 x Varilla latón Ø 0,5 mm x 1000 mm
1 x Varilla latón Ø 0,8 mm x 1000 mm
1 x Transmision funda/varilla octog. plastica 4/3
1 x Protector punta ala 40x14 (2 pcs)
1 x Soporte frontal tren de aterrizaje 29x26x13,5
1 x Tornillo M3x0,5x20 mm Sokect Head aluminio anodizado lila (4 pcs
1 x Tuerca autoblocante M3 aluminio azul (4 pcs)
1 x Tornillo Servos M4x5/8 aluminio anodizado azul (4 pcs)
1 x Prisionero allen M4x6
1 x Protector punta ala 38x10x12 (2 pcs)
1 x Varilla mando doble roscada aluminio M3 100 mm (2 pcs)
1 x Varilla mando doble roscada aluminio M3 70 mm (2 pcs) knurled
1 x Varilla mando doble roscada aluminio M3 60 mm (2 pcs) knurled
1 x Varilla mando doble roscada aluminio M3 50 mm (2 pcs)
1 x Prisionero aluminio 6 mm Ø (4 uds)
1 x Helice PT 21x13 EL
1 x Prisionero aluminio 4 mm Ø (4 uds)
1 x Prisionero 2 mm Ø (4 uds)
1 x Prisionero 3 mm Ø (4 uds)
1 x Gorra Jeti Negra
1 x Terminales riostras M2,5 (2 pcs)
1 x Polea de bronce 2,5/1 (2 pcs)
1 x Acople ALU M3 Ø 4 (2 uds)
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Set clevis para pull-pull (TY13233 y TY13234)
1 x Varilla mando roscada M2,5 (2 uds)
1 x Tensor de riostras M3 33x49 (2pcs)
1 x Sistema para cables con tensor (rojo)
1 x Anillo espaciador para hélice graupner 8/5.5 mm
1 x Palanca del cíclico LA500
1 x Rodamiento one-way LA500
1 x Antena RX 85 mm HoTT
1 x Parte central del cíclico LA500
1 x Varilla latón Ø 1,5 mm x 1000 mm
1,656.86EUR
Fabricantes
Información del Fabricante
Roi-Import
Roi-Import Página Principal
Otros productos
Idiomas
Español English
Monedas