1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Steering arm 16 mm Ø 3 mm
1 x Locking cable tie 2.5x100 (uds)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Steering arm 12 mm Ø 4 mm
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Covered closure or fairings
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Steering arm 16 mm Ø 4 mm
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Locking cable tie 4.6x203 (uds)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
2 x Cap closure 33/23.5mm (2 uds)
1 x White silicone 0,25 mm² wire (25 m)
1 x Silicone 0,35 qmm servos wire Graupner(100 m)
1 x PVC 0,08 qmm Graupner servos wire (5 m)
1 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x JR silicone servo wire 0,35 qmm / 5m
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x 50m servo "Premium" wire (white/red/blue)
1 x ABS tube 6.0x5.0x1000 mm
1 x Rescue 1,8m2 / BackPack
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Round Rod 2,0x1000 mm
1 x Servo NARO Max Std
1 x PIX Hawk with accesories
1 x Nylon hinge for flaps 33x9 (2 pcs)
2 x Sparkplug Saito 400
1 x Cable grommet Ø 5 mm (4 uds)
2 x Sparkplug ROSSI R8
1 x Landing gear frontal support 25x32x16
1 x Allen wheel collar M4x6
1 x Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
3 x Bujia OS G5 gasolina
1 x Spark motor OS nº 3
2 x Sparkplug 1/4-32 EVO 10GX
1 x Snap long M2 (10 uds)
1 x LiPo Storage Box Type "P"
1 x Allen wheel collar M3x5
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Sparkplug Champion RCJ-7Y for ZG
1 x Split M1,2x10 (10 pcs)
1 x FESTO connector M7 Quick 6 mm
1 x Conector FESTO M3 Quick 3mm 90º
1 x Y-Hose connector 4-4-4mm
1 x Wing bolts M6 Steel screw Red (2 pcs)
1 x 90 mm rods + T patellas set for direction control
1 x 80 mm rods set for direction control
1 x Fuel Fittings-Blue
1 x 1000 cc gasoline fuel tank complet
1 x Quick hose connector 4-3 mm
1 x FESTO connector M7 Quick 6mm 90º
1 x Cable set PREMIUM, fuselage/wing
1 x Silicone black 1,0 qmm wire ( 25 m)
1 x Silicone black 1,0 qmm wire (100 m)
1 x Cable set Premium™ MAXI "one4two"
1 x Silicon black 2,5 qmm cable ( 25 m)
1 x Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x Silicone black 4,0 qmm wire (25 m)
1 x Black silicone 1,0 qmm wire (50 m)
1 x Silicone red 4,0 qmm wire (25 m)
1 x Silicone black 4,0 qmm wire ( 1 m)
1 x Silicone black 2,5 qmm wire ( 1 m)
2 x Motor DLE 60 cc Twin
1 x Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x Motor DLE 35 RA
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x Fiberglass heat shield Ø 4 mm 1000 mm
1 x Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x Motor DLE 20 RA cc
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Angled clevis with threaded rod M3
1 x aluminium servo arm V1-JR 1,0 inch M2
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x 45 mm gas motor standoff
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Connectors MPX 8 pins (green) 1 pair (male-female)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Sparkplug 1/4-32 Glow
1 x Spark plug key NGK MVVS
1 x Spinner 42 mm EXTRA 330SC
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x POWER PEAK D7 EQ-BID 12V/230V-Duo Charger
1 x Avia spare fouselage CF reinforced (Top Model)
1 x 57 mm micro-mini servo cover
1 x Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs)
1 x Spark motor OS nº 8
1 x Cockpit aluminium closing 4.7g
1 x Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
1 x DUPLEX 2.4EX Central Box 220
1 x Press fitting for 0,5 diam. steel cable (10 pcs)
1 x Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x DUPLEX 2.4EX MULi 6s M
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Screw-lock connector M2 (2 uds)
1 x Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs)
1 x DUPLEX 2.4EX Central Box 320
1 x Fully Threaded Steel Rod M3
1 x AddCAP 10AS capacitors
1 x DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS
1 x Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x Caps multicolor Switch JETI
1 x DUPLEX 2.4EX RC Power Switch 10
1 x Cabin latch Fox MDM1 4m (pair)
1 x 18 mm wing servo holder
1 x 90x60 mm standart servo cover
1 x SKY RC T400Q Charger 4x100w
1 x Charger SKY RC e680
1 x Motor DLE 20 cc
1 x PT 21x13 EL Propeller 3 Blade
1 x 89x25 mm (3.50") Type jets aluminium core wheel
1 x 110x55 mm SLH KOVO wheel
1 x 152x46 Ø6.0 mm aluminium core wheel
1 x DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC)
1 x 101x28 mm (4.0") Type jets aluminium core wheel
1 x 76 mm light wheels (2 pcs)
1 x Tyres 70 mm Xclaibur (2 pcs)
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
7,300.51EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies