1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Nylon hinge for flaps 33x9 (2 pcs)
2 x Flap hinge (6 pcs)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Small pinned hinge (12 uds)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Gates hinge aluminium (1 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Long pinned hinge (6 uds)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Miniature brass strap hinge, 1 m
1 x 25 mm reinforced hinge
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
3 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 18 mm reinforced hinge
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x SlowFlyer control horn (3 pcs)
3 x Horn 5/10 with M2 Bearing
2 x Extension silicon 30 cm male (Graupner)
2 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
2 x Brass control horn M2 short for wire (2 pcs)
1 x Brass control horn M4 short for wire (4 pcs)
1 x Horn for flap control (1 pcs)
1 x Extension silicon 100 cm (Futaba)
1 x RH long aluminium horn (2pcs)
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Extension 100 cm (Futaba)
1 x Horn 6/27 with M3 Bearing
1 x Cable S.BUS 3 salidas 100 mm
1 x Extension silicon 100 cm (Graupner)
2 x LH long aluminium horn L31xH30 (2pcs)
2 x Horn with ball 55x40
2 x Cabel "Y" 30 cm (Futaba)
2 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x 6 mm blue aluminium threaded horn with patella
1 x Extension lead 15 cm Multiplex
1 x 20 mm carbon horn
1 x Premium servo extension 25cm
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Futaba Female 40 cm extension
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
2 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Horn 6/35 with M3 Bearing
3 x Extension 7.5 cm
2 x Extension 90 cm (Futaba)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x ABS tube 6.0x4.0x1000 mm
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x USB HLS prog. interface
1 x Pine wood slat 3.0x10.0x1000 mm
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Connectors banna oro 4 mm (M/F)
1 x Conector XT-30 (hembra)
1 x Pilot "Anthony" (Slimline)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Large flex hinge (12 uds)
1 x Pin hinge 34x16 mm (10 uds)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
2 x Flap hinge 33x9 mm (6 pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Indoor hinge with servo arm integraded
1 x Control horn long w/ball
1 x Medium extra-strong control horn with bearing 2,8x24
1 x 6 mm M3 variable inclined horn
2 x Small adjustable aluminium control horn with bearing 2,8x15
1 x Spare Part Frame Set for EACHINE RACER 250
1 x Micro control horn T2 Ø 1
1 x Extension silicon 25 cm (Graupner)
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible
1 x TS832 to Gopro AV/Power Cable
1 x Quadcopter Q50 Kit Carbon Fiber
1 x Extension silicon 35 cm male (Futaba)
1 x Horn 16,5x20 mm (2 pcs)
1 x Motor 2212 (1000KV) Quadcopter F450
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Futaba 17 mm servo arm with ball link HITEC
1 x Horn 13,5x16 mm (2 pcs)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Motor brushless 1806 - 2300 Kv Cuadracopter
1 x Extension silicon 75 cm (Futaba)
1 x Horn 6/20 with M3 Bearing
1 x Short extra-strong control horn with bearing 2,8x15
2 x Small aluminium horn blue (2pcs)
1 x 6 mm red aluminium threaded horn with patella
1 x Long extra-strong control horn with bearing 2,8x34
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Landing gear axle 4x21 4 mm (2 uds)
1 x Parachute PV6 for F3J
2 x Motor A2212/13T
1 x Landing gear axle Ø 6 mm (2 uds)
1 x Landing gear axle Ø 5 mm (2 uds)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Servo Metal Horn 15.5 mm MKS
1 x Servo MKS HBL380
1 x SAVOX SH 1290 MG servo digi
1 x Servo arms set HS-60/81/85/5082MG/5085mg
2 x Servo KST X20-7512 V8.0 82kg 8.4v
1 x Cable video GoPro
1 x Actuador lineal HLS12-100210-7.4v
1 x Cable video GoPro and 5V cable
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
1 x OS 40-FG 4T Motor
1 x 90 mm rods + T patellas set for direction control
1 x Motor OS 46 AX II
1 x Motor OS 37 SZ-H
1 x Carburador OS (Type 40K) 46AXII
1 x Bujia OS G5 gasolina
1 x 140 mm rods set for direction control
1 x Radial mount for electric 2.5-5.6
1 x AXI 2826/10 V2
1 x AXI 2814/16 V2 Long
1 x AXI 2820/14 V2 Long
1 x AXI 2217/20 V2 Long "F5J"
1 x AXI 2814/10 V2
1 x Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x AXI 2814/12 V2 Long
1 x AXI 2217/20 V2
1 x GameCommander USB Universal
1 x Motor KAVAN PRO 2225-1600
1 x AXI 2820/12 V2
1 x AXI 2217/16 V2 Long
1 x Crystal Universal RX 35.140 Ch 74
1 x Micro Crystal RX 35.010 Ch 61
1 x AXI 2826/6 V2
1 x Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x Motor MVVS 5.6/690 GLIDER
1 x Bidule 55 V3 2460 mm
1 x 50x45 mm micro-mini servo cover
1 x Astra wing Joinner (Top Model)
1 x 57 mm micro-mini servo cover
1 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x Angle of incidence meter
1 x Extension MPX-MPX 20 cm
1 x Caps multicolor Switch JETI
1 x Metal ring front FEMA
1 x Restrictor FESTO 3/3 mm
1 x Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x Servo KST X10-710 V8.0 7.5Kg HV
1 x Savox Brushless Servo SC-1267 SG
1 x Servo SAVOX SW-1250 MG digi
1 x POLARON EX 800w charger
1 x Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x Spinner fixed propeller 42 mm / 5,0 mm
1 x Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x Servo KST A08H V6.0 3,2Kg HV
1 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x Battery RX JETI LiIon RB 3100 7.2v
1 x DUPLEX 2,4GHz MRPM-AC EX
1 x DUPLEX 2.4 EX MVario2
1 x DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14
1 x DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14
1 x Car Charger DC/DS-16
1 x DUPLEX 2.4EX Central Box 210
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x Duplex 2.4EX tray transmitter DC-16 II Black multimode
1 x Duplex 2.4 EX TopFuel MTAG Battery Reader
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x DSM 10 Dual Switch Mixer
1 x DUPLEX 2.4EX Central Box 220
1 x DUPLEX 2.4EX MFlow2 Gas 800
1 x DUPLEX 2.4EX MU 3 Sensor
1 x Switch Cap L (black)
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x WINGO 2 PNP
1 x Servo arm with 6 mm hole to FEMA 9800A
1 x Gearwheel 9724/09 for ZG 45
1 x Wheel FEMA 127 mm / 6 mm
1 x Servo KST X08 Plus 9g HV servo
1 x Distanzstück motor OS 120 AX
1 x Spinner fixed propeller 60 mm / 5,0 mm
1 x Servo SAVOX SV-1254 MG HiVolt Low Profile
1 x Savox Brushless Servo SB-2271SG
1 x Receiver Crystal 35 Mc/s Ch 62
1 x Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x Soporte servo KST X08/H and Plus
1 x Servo KST X15-1208 V8.0 13.5Kg HV
1 x Servo SAVOX SV-1270 TG
1 x Savox Brushless Servo SC-1251 MG
1 x Quick hose connector 6-4 mm
1 x Brake for 140 mm wheels
11,204.27EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies