1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Ferrita 27x14x7 mm
1 x Ferrita 17x10x6.5 mm
1 x Ferrita con funda
2 x L-Connector 4.0 mm x 1000 mm
3 x Profile ABS Square 2 x 1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
2 x U Profile ABS 2,0x4,0x1000 mm
1 x Angle of incidence meter
2 x Surface Indicator Gauge Small
2 x Angle measurer
1 x Propeller POWER-PROP 14x9
2 x Paramotor BackPack XXS 2
1 x Straightened rod Ø 14.0 mm x 1000 mm
2 x Trike XL motor set (motor+esc+prop)
1 x Wing OXY 0,5 pulgadas2
3 x Windsock Ozone L - 700 mm
1 x LASER 73" 1.85m (05) PILOT
1 x Propeller POWER-PROP 13x9 Izda
2 x Parachute PV6 for F3J
2 x Ballast 700gr OPALE
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x 25 mm reinforced hinge
1 x Cable S.BUS 3 salidas 100 mm
1 x Connectors banna oro 0,8 mm (M/F)
1 x Yellow smoke canister 100 g
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Socket head ball link M3 (2 uds)
1 x Starter EM Gear Power 250
1 x Hexagonal ball head 2.0 x 50 mm
1 x Aceite DELUXE turbine Jet Oil 1 litro
1 x 39,0 mm propeller (rigth propeller)
1 x Oils Pumps Empty (1 liter)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
2 x Profile ABS triangular 6.0x1000 mm 90º
1 x ABS angle 3,0x3,0x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x Cross Connector 4.0 mm x 1000 mm
2 x ABS angle 6,0x6,0x1000 mm
2 x ABS "T" angle 2.0x2.0x1000 mm
2 x Profile ABS triangular 4.0x1000 mm 60º
1 x L-Connector 1.0 mm x 1000 mm
1 x Profile ABS half cane 2.5x1000 mm
2 x Rubber profile 10-2 mm 2M
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
2 x L-Connector 1.5 mm x 1000 mm
1 x Profile ABS half cane 5.0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
2 x Profile ABS half cane 4x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x ABS rectangular profile 12x6.0x1000 mm
3 x Profile ABS Square 3 x 1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x Profile ABS half cane 8.0x1000 mm
1 x Rubber profile 8-2 mm 2M
1 x Flat Connector 4.0 mm x 1000 mm
1 x Profile ABS half cane 2.0x1000 mm
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x USB Adaptor OPTronics
1 x SINGLE FUELING VALVE GASOLINE MK2 SMALL
1 x Parachute BACKUP X100
1 x Mobile Terminal
1 x GPS Sensor + Logger OPTronics
1 x OS 40-FG 4T Motor
2 x LUCAS pilot ARTF
1 x Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox)
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x SPARK Switch 7.4v
2 x FX three-position switched channel, long
1 x JETImodel Addcap 1640
1 x Connector CAN 15
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x EWC3 100 cm wing connector
2 x Cabling for Fox MDM1 wings
1 x Extension 2/3 lipos JST/C
1 x Connector Sub-D 2+5 Female
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Male Prolonger TP 4/5S
1 x Propeller balancer
2 x Paramotor Trike XL
1 x Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Truck-trailer for gliders 720 x 239 mm
1 x Opale Rucksack
1 x ASK 21 6.8m
1 x Fox 4000 mm (Airwold)
1 x X-RAY Micro QR (Elevator)
1 x Q-12 2000 mm Electric
1 x JETI handheld transmitter DS-14 II Blue Multimode
1 x Transmitter JETI Duplex DC-24 EX Carbon Line DARK Red Multimode
1 x Transmitter JETI Duplex DS-24 EX Multimode
1 x Emisora JETI Duplex DS-16 II Carbon Line RED
1 x 300x4 mm M4 shaft ship
1 x 29,0 mm propeller (left propeller)
1 x 38 mm fenders (10 pcs)
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x 150 mm inflatable superlight deluxe wheel (2 pcs)
1 x TURBINATOR 2 ORANGE/SILVER 1778 mm Combo
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Conector MR-60 (pareja)
1 x Cable coupler M2 (10 uds)
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x 39,0 mm propeller (left propeller)
1 x 40,0 mm hydro-propeller (left hydropropeller)
1 x JETI handheld transmitter DS-14 II Green Multimode
1 x 75 mm
1 x Birch plywood plate 600x300x1.5 mm
1 x Receiver replacement antenna, approx. 15
1 x ABS angle 10,0x10,0x1000 mm
1 x 90x60 mm standart servo cover
1 x ABS Strip 1.5x3.0x1000 mm
1 x 18 mm wing servo holder
1 x Bidule 55 V3 2460 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x DSM 10 Dual Switch Mixer
1 x Battery RX JETI LiIon RB 5200 7.2v
1 x DUPLEX 2.4EX Expander E4
1 x Shaft for A60-L V4
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x Opto Gas Engine Kill Switch
1 x MPS Gas-Cap-Powerswitch
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x Adapter lead MPX/EC3
1 x Short Switch On/Off micro
1 x MPX-Dean "T" Adapter
1 x DPSI magnetic switch actuator (housing)
1 x PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF
1 x SLICK 360-B 104" (2640 mm)
1 x Q-12 X-light 2000 mm Electric
1 x UMX™ Whipit™ DLG BNF Basic (E-flite)
27,219.99EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies