Top » Catalog » Hardware » Transmitters/Receivers » Transmiters » Jeti » JETIDS12SECP

859.00EUR

Emisora JETI Duplex DS-12 EX Special Edition "Carbon Purple"
[JETIDS12SECP]

Handheld transmitter DS-12 Special Edition Carbon Purple Multimode incl. R5L

Product description
A handy transmitter, high-quality design with plastic housing, large color display, ball-bearing aluminum sticks and wear-free hall sensors. A low weight, the high-quality execution of the housing and a great ergonomic characterize this transmitter.The front panel is made of high quality carbon and the control buttons made of aluminum. The software can be expanded according to personal preferences and of course JETI here also offers the full telemetry options.

JETI Duplex soft case and JETI Duplex R5L receiver.
Features
Channels: 8 (up to 12 extendable)
2.4GHz RF module: 1
900MHz backup system: Optional
Color TFT: 3.5 inches, 320x240 pixels
Sticks made of aluminium with hall sensors: Yes
Resolution sticks: 4096 steps
Internal memory: SD card, 8GB
Free mixers: 5 (up to 20 extendable)
Timers: 3 (up to 20 extendable)
Visible values on display: 10 (up to 40 extendable)
Voice output for functions: 5 (up to 20 extendable)
Alerts: 10 (up to 40 extendable)
Channels for gyro axes: 1 (up to 3 extendable)
Flight modes: 3 (up to 6 extendable)
Flight mode trimming: Yes
DITEX telemetry values: 16
Lua extensions: max. 10
MP3 player: Yes
Microphone: Yes
8 Sprachen (EN / DE / CZ / FR / IT / PT / SE)

Optional features
Logical switches: 0 (up to 16 extendable)
Sequencers: 0 (up to 6 extendable)
Accelerometer: Optional
Audio player: Optional
Telemetry controls: 0 (up to 16 extendable)
Vibration alert: Optional
Voice output: Optional
Servo balancer: Optional
Function curves: Optional
Throttle limiter: Optional
Variometer: Optional
Delivery condition
The transmitter is delivered in steering mode 2, alternative steering modes can be adjusted by yourself.

Delivery contents
1 JETI Duplex handheld transmitter DS-12 Special Edition Carbon Purple Multimode, 1 internal transmitter battery and 1 transmitter power adapter, JETI Duplex soft case, JETI Duplex R5L receiver, Hacker Brushless Motors - Cap.

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
      Futaba
      Graupner
      Jeti
      Jeti Accesories
      Multiplex
      Multiplex Accesorios
      PowerBox CORE
      RCM Pelikan
      Secraft
      Spektrum
      FrySky
    Receivers->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Controlador tren/frenos ER-150 V2
55.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Softshell Hispano Aviación
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Ferrita 14x8x5.5 mm
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Oracover Verde 2 m
1 x	Interface Jack Adapter IKARUS
2 x	20 mm carbon horn
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Quicklock washer 1 mm (10 pcs)
1 x
1 x	B4-0 rocket charges (6 pcs)
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	500 ml sealer (DOPE)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Hobbylite Filler, Balsa colour
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	ASG 32 560 mm
1 x	SUS wire 3m (nylon coated)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	CC 05
1 x	XH male balance (4S) connector (2 pcs)
1 x	Profile ABS half cane 3x1000 mm
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Dean "T" - Futaba Adapter
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Canopy Latch
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
2 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Partall paste 650 g
1 x	Oracover Azul 2 m
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	Copier 5x20 cm pcs
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
2 x	Monokote BLANCO jet (1.8x0.65m)
1 x	50N turbine start protection tube
1 x	2,5x60 mm allen screwdriver
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Ball Link Plier
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Universal Colour Paste deep black 50 g
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Ventral support for AX-18/AX-60
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	2,0x50 mm allen screwdriver
1 x	AX-60 starters (5 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
2 x	ORACOVER Fluor red (2 m)
1 x	Oratex Antik 2m
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Steering arm 12 mm Ø 4 mm
1 x	1,5x50 mm allen screwdriver
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Equipment set XL
1 x	Steering arm 16 mm Ø 4 mm
1 x	CM-3
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Flat washer 2.2 mm (20 pcs)
2 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Oracover CARBON Metalic 1 m
1 x	USB HLS prog. interface
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Oracover White 10 m
1 x
1 x	Profile ABS Square 3 x 1000 mm
1 x	M3-M4 rubber washer (8 pcs)
1 x	Horn 6/27 with M3 Bearing
1 x
1 x	Oracover Red 2 m
1 x	Small aluminium horn blue (2pcs)
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Parachute expulsion foam
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Horn 5/20 with M2 Bearing
1 x	Spray EC Red 400ml
1 x	Rocket cardboard tube 50mm x 48mm x 250mm
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Screwdriver for Torx® TX6
1 x	Circlick securite
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Spray Graphit 33
1 x	ORACOVER Ferrari red (2 m)
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	EDGE XL Orange
1 x	White smoke bombs AX-9 (10 pcs)
1 x	3 LiPo XH>EH adapter
1 x	Oratex Yellow Cub 10 m
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	CC 01
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Small aluminium horn red (2pcs)
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Plastic caps for AIR BURTS (30 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	SE Ring 350 mm (2 pcs)
1 x	Spikes Band (5 m)
1 x	SERVO HOLDER
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	200m servo "Premium" wire (white/red/blue)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Tape GFK 38 mm
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Support FUEL DOT V3
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Soporte filtro FESTO (4 pcs)
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	1/10 Pilot "Jack"
1 x	Piloto jet 130 mm
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Soporte grifo FESTO (2 pcs)
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	1/6 Pilot "Buddy"
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Pilot JAN 1/4 Saiplanes
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Pilot "Anthony" (Slimline)
1 x	Support Flush MPX Conector (6 pcs)
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	PVC transparent battery termo-retract 51 mm (1 m)
1 x	6 mm M3 variable inclined horn
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Motor A20-26 M EVO
1 x	Motor A30-12 XL Glider
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	Cockpit latch closing I=10 mm
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	6 mm aluminium horn with patella
1 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x	LA500 cyclic central part
1 x	LA500 pre-rotation gear hub
1 x	Head core bushing
1 x	LA500 pre-rotation gear
1 x	Cierva C30 Body Spain
1 x	Ball joint long
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	DPS Switch JR/JR
1 x	Connector Sub-D 2+5 Male
1 x	JETImodel Addcap 1640
1 x	Propeller drill jig DA-35/50/60/70
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	Tester LiPo/LiIon/LiMn/LiFe
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	58 mm micro servo cover
1 x	Servo TOPMODEL STANDARD S3217
1 x	1/12 Pilot "Langley"
1 x	6 mm M3 variable horn
1 x	MULTIPLEX ALUMINUM CASE "M-LINK"
1 x	Futaba Radio Case
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Blind nut M4 (10 pcs)
1 x	45 mm rods set for direction control
1 x	Charger FUTABA SQN30W12P-08 220v
1 x	Motor A50-14L Turnado V3 Glider
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Blind nut M5 (10 pcs)
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Snap pin for micro clevis (10 uds)
1 x	PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x	A40 Backmountset complete
1 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	Motor A50-10L Turnado V3 Glider
1 x	DPSI RV Mini 6 Magic
1 x	DPSI OCP Overload protection
1 x	Tren de cola carbono 50-70cc
1 x	Tailwheel for 60/120 size
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	DPSI 2001 RV
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Wheel keeper washer
1 x	LA500 ciclic lever
1 x	Head core
1 x	LA500 Autogyro
1 x	Head spacer
1 x	Head runner
1 x	LA500 nose
1 x	Rotorshape Elevator
1 x	LA500 housing-lower cyclic
1 x	Washer 2.2×4
1 x	Motor wall
1 x	Motor rotor LA-500
1 x	Steering lever
1 x	Balls 4 mm
1 x	Head lower part
1 x	Kit hydraulic brake
1 x	Connector Sub-D 2+5 Female
1 x	ORACOVER transparent Yellow (10 m)
1 x	PROXXON - SAW BLADE (50MM - 20T) (28017)
1 x	AXI 2820/14 V2
1 x	PROXXON - SAW BLADE 8MM 0ZI220E
1 x	PT 21x13 EL Propeller
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Rubber Insert hard, 1 Pcs.
1 x	AXI 2212/12 V2
1 x	Mini-handed clamp
1 x	Profile ABS Square 4 x 1000 mm
1 x	Sheet Depron Aero 1250x800x3 mm
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x	Oracover Yellow CADMIO 2 m
1 x	AXI 2814/12 V2
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	PT 16x10 E Propeller
1 x	Extra Hard Titanium Herxagon Screwdrivers
1 x	AXI 2826/8 V2
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Dremel PERMAGRIT 18 mm round lime
1 x	Oratex Natural White 20m
1 x	Oracover Black 10 m
1 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x	11 mm wing servo holder
1 x	Servo TOPMODEL DS9010 T
1 x	Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)

9,894.34EUR