Top » Catalog » Hardware » Controlers » Brushless » Kontronik » KON4604

299.90EUR

JIVE 100+LV Esc
[KON4604]

With Jive you can expect a completely new control concept that will convince you.

Shock resistant housing made of special nylon Jive protects variator against mechanical damage, and also it's waterproof sealed.

This variatos have the new optimum cooling plate with the components connected. This makes Jive variators have a very good heat dissipation and enables the easy implementation of additional refrigeration.

The plastic material was specifically develops for these electronics aplications and provides tension-free and gentle encapsulation for the component.

The new cooling plate with the components connected make posible a very good heat dissipation and enables the easy implementation of additional refrigeration.
By adding air or water-cooling you can gain more eficience in your aplication (A good cooling allows up to double performance).

This variators have adjustable 5-6V BEC with 5A continuous current and 15A peak.
This BEC can operate without problems using 12S (of course without any voltage fluctuations and disorder problems)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
    Brushless->
      Aero-Naut
      Hacker
      Jeti->
      KAVAN
      Kontronik->
        Accesorios
      MGM
      Otros
      RIPMAX
      ROI-Import
      Top Model
      YGE
    Brushed
    Program Cards
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Bucker Bu-133 Jungmeister #69 2540 mm ( CY Model)
1,299.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	Cap Hispano Aviación
1 x	Shirt Hispano Aviación
1 x
2 x	Servo NARO Max Std
1 x	ALPHA 1000mm BL ARTR
1 x	Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS
1 x	Regulador Actro-Marine 80A
1 x	SCHARNHORST Battleship 1:200
1 x	SCHARNHORST accessories
1 x	Carbon plate 350x150x1.0 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Profile ABS half cane 3x1000 mm
1 x	Cable with accesories
1 x	Profile ABS Square 2 x 1000 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Cinta Goldfix 1m
1 x	SIMtransmitter 6 Mode 2
1 x	Angle of incidence meter
1 x
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	6 mm aluminium horn with patella
1 x	Angled clevis with threaded rod M3
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Threaded coupler M3 (10 uds)
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
2 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
2 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Horn 6/27 with M3 Bearing
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Piloto Jet "Red" 1/6 Scale
1 x	SE Ring 250 mm (2 pcs)
1 x	PPM Encoder Module
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Pilot "Goose" (Slimline)
1 x	Angle measurer
1 x	1/6 Pilot "Buddy"
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Pilot Lotsenboot
2 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Profile ABS Square 4 x 1000 mm
1 x	Interface Jack Adapter IKARUS
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Tape GFK 38 mm
1 x	Horn with ball 40x30
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Propeller balancer
1 x	1/6 Pilot "Garry"
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Carbon fiber rod 6.0 mmx1000 mm
2 x	Couple M4 for wire (10 pcs)
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
2 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Cable control set
1 x	SE Ring 360 mm (2 pcs)
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Interface Realflight Simulator
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	SE Ring 300 mm (2 pcs)
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
2 x	WingFix ULTRA Black Edition
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Horn 6/20 with M3 Bearing
1 x	SE Ring 240 mm (2 pcs)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	EasyFLY Addon
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	ORACOVER Ferrari red (2 m)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	ABS tube 3.0x2.0x330 mm
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Oracover Yellow CADMIO 2 m
1 x	Oracover Azul Cielo 2 m
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Ferrita 27x14x7 mm
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Jun-Si iCharger 4010 Duo
1 x	TA1200 Charger Compatible with Smart and Standard LiPo Batteries
1 x	Cargqador GensAce IMARS III Pro Smart Balance RC
1 x	Charger GensAce IMARS Dual Channel AC200W/DC300Wx2
1 x	Softshell Hispano Aviación
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Propeller balancer
1 x	Pulley brass 6/1,5 (2 pcs)
1 x	Oratex Natural White 20m
1 x	Stainless steel 4 m Pull-Pull complet set (max 20 kg)
1 x	Set clevis for pull-pull (TY13233 & TY13234)
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Micro control horn T2 Ø 1
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Long adjustable control horn 3x34
1 x	Film release agent PVA 25 ml
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Autogyro Cierva C30 Spain
1 x	PROFI Box JETI
1 x	Crimping tool
1 x	MicroMatch PowerBox
1 x	5 line servos wire black (1 m)
1 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x	Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Battery LiPo GENS 160 mAh 2S 7.4V 30C (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace)
1 x	Oracover Black 10 m
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Oracover Brown 2 m
1 x	Battery LiPo GENS 2500 mAh 2S 7.4v 25C (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 2S 7.4V 50C (Gens Ace Hard Case)
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	wire tensioner (silver)
1 x	Oracover Yellow CUB 10 m
1 x	SE Ring 400 mm (2 pcs)
1 x	Pulley brass 16/2 (2 pcs)
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Turnbuckle M2,5x32/48 (2pcs)
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Pulley brass 14/2 (2 pcs)
1 x	Oracover CHROME 2m
1 x	Small aluminium horn gold (2pcs)
1 x	Horn DUBRO 1/2A
1 x	Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Long horn 50x26
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Teflon rollers 80 mm x 15 mm Diam.
1 x	Small control horn with bearing (2 pcs)

8,805.76EUR