Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


under request
under request

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
Servo GO-1006MG (0.052s/60º, 3.0Kg)
Servo GO-1006MG (0.052s/60º, 3.0Kg)
52.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x Rescue 1,8m2 / BackPack
2 x Windsock Ozone L - 700 mm
1 x Para-RC Trike "RC-Bullix"
2 x Paramotor Kit Camo H1.5/ Ben Red
1 x Parachute PV6 for F3J
2 x Paramotor Trike XL
1 x LUCAS pilot ARTF
1 x Opale Rucksack
2 x Ballast 700gr OPALE
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x 6 mm red aluminium threaded horn with patella
1 x Small aluminium horn gold (2pcs)
1 x Small aluminium horn blue (2pcs)
1 x 6 mm blue aluminium threaded horn with patella
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Brass control horn M4 short for wire (10pcs)
2 x SlowFlyer control horn (3 pcs)
1 x Horn 5/10 with M2 Bearing
1 x LH long aluminium horn L31xH30 (2pcs)
1 x Brass control horn M3 short for wire (2 pcs)
2 x Horn 6/20 with M3 Bearing
1 x Motor A2212/13T
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Horn 16,5x20 mm (2 pcs)
2 x Horn 6/27 with M3 Bearing
1 x Horn with ball 55x40
1 x RH long aluminium horn (2pcs)
1 x Horn 5/15 with M2 Bearing
1 x Cable with accesories
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Horn with ball 40x30
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x BALSA trip 2.0x10.0x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
2 x Linden wood slat 3.0x3.0x1000 mm
1 x BALSA trip 10x10x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x BALSA triangular 6x6x1000 mm
1 x SE Ring 480 mm (2 pcs)
1 x Joint with bearing M2 22x5,5
1 x USB HLS prog. interface
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Para-RC "RC-Evo-Cross" Rescue
2 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x LED wire (orange - 2pcs)
1 x Motor OS 3820-1200 electric
1 x Fiberglass landing gear for 140-160
2 x Towing hook
1 x Tailwheel for F3A size
1 x White aluminium 230 mm landing gear
2 x Tailwheel for 1-3 kg models
1 x Bearing block for noseleg landing gear
1 x Small adjustable aluminium control horn with bearing 2,8x15
1 x Horn 5/20 with M2 Bearing
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x Brass control horn M2 short for wire (2 pcs)
1 x Rudder forward 70x28 "type Kato"
2 x Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x LED blink wire flashing (green - 2pcs)
1 x NF-3X-80 liner Kit
1 x Jet Afterburner Simulator NF-Jet2YY Set
1 x Landing lights 18 mm (0.71in)
1 x Light System
1 x Tow hook for tug
1 x DUPLEX 2.4EX RC Switch
1 x Mega Motor RC 400 F5J 1950KV
1 x Paramotor BackPack XXS (without accessories)
1 x Shaft for A60-L (140mm)
1 x Axle for motor A30-XL V2
1 x Set cintas unión paracaídas 145 cm
1 x Paramotor BackPack XXS 2
1 x A60 Motor Mount Alu complete set
1 x Battery charging cable XT60
1 x Suncover 100cc Red
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Shaft for A60-20/22/24S (120 mm)
1 x Wing OXY 5,0 m2
1 x Tren de cola carbono 50-70cc
1 x Tailwheel for 60/120 size
1 x Flybar support metal LAMA
1 x Blade holder metal LAMA
1 x 2020/20 frontal part with magnets
1 x AXI 2826/6 V2
1 x AXI 2826/12 V2
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Spinner INO 89 mm Chrome (Imitacion metal)
1 x Propeller Pleg CAM Carbon 10.5x6
1 x Propeller Pleg CAM Carbon 15x8
1 x Duplex 2.4 EX TopFuel MTAG Battery Reader
1 x Propeller Pleg CAM Carbon 12x5
1 x Propeller Pleg CAM Carbon 14x7
1 x Spinner 82mm Black ventilado
1 x Motor Advance 50-6
1 x Motor Mega AC 16/15/02
1 x Motor ORBIT 20-12 with coolingfan
1 x Motor Mega AC 16/15/03
1 x Motor Mega AC 22/30/03
1 x Landing gear retract neumatic (Jet Legend)
2 x LOWER TOW HOOK
1 x Towing hook
1 x Coversion set HIROBO EX/EAGLE elektro
1 x Carbon blade 230 mm
1 x Swashplate metal LAMA
1 x Carbon blade 3D 230 mm
1 x Wheel FEMA 152 mm / 8 mm
1 x Compact on-board starting system (9512)
1 x Wheel FEMA 70 mm / 5 mm
1 x DPSI RV Mini 6 (2008)
1 x Switch magnet for gas cap and magnet switch actuators
1 x Servo-V-Limiter 5.2V
1 x Small control horn with bearing (2 pcs)
1 x OPTOTRONIX Aurora LCU
1 x AXI 2814/10 V2
1 x AXI 2814/16 V2
1 x AXI 2820/10 V2
1 x AXI 2820/14 V2 Long
1 x AXI 2826/6 V2 Long
1 x AXI 2820/14 V2
1 x Small aluminium horn red (2pcs)
1 x AXI 4120/14 V2
1 x AXI 2808/24 V2
1 x AXI 2820/8 V2 Long
1 x 63 mm INO spinner (carbon imitation)
1 x F3A carbon 80 mm spinner for Spark EVO
1 x Propeller Pleg CAM Carbon 11x4
1 x F3A carbon 85 mm spinner for AXI
1 x Propeller Pleg CAM Carbon 11x6
1 x Neck strap JETI DS
1 x Long adjustable aluminium control horn with bearing 2,8x15
1 x Propeller Pleg CAM Carbon 12.5x7.5
1 x Hand Pads for Tray JETI
1 x 70 mm INO spinner (carbon imitation)
1 x DUPLEX 2.4EX Central Box 320
1 x Propeller Pleg CAM Carbon 11x10
1 x Transmitter JETI Duplex DS-12 EX Multimod YELLOW
1 x Transmitter JETI Duplex DS-12 EX Multimod RED
1 x Transmitter JETI Duplex DS-24 EX Carbon Line Multimode
1 x Transmitter JETI Duplex DC-24 EX Carbon Line DARK Red Multimode
1 x Transmitter JETI Duplex DC-24 EX Carbon Line Light BLUE Multimo
1 x MZ-10, 5 Channel HoTT
1 x Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX
1 x Propeller Pleg CAM Carbon 15x6
1 x Propeller Pleg CAM Carbon 11x7
1 x Propeller Pleg CAM Carbon 16x13
1 x DUPLEX 2.4EX Central Box 220
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x 51 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x F3A carbon 95 mm spinner
1 x Propeller Pleg CAM Carbon 13x5
1 x DUPLEX 2,4GHz MRPM EX
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x Spinner INO 82 mm Chrome (Imitacion metal)
1 x Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x DUPLEX 2.4EX Expander E2
1 x Fixed launching hook
1 x Adjustable launching hook
1 x Transmitter JETI Duplex DS-24 EX Carbon Line Dark RED Multimode
1 x Transmitter JETI Duplex DS-24 EX Carbon Line Dark BLUE Multimod
1 x Transmitter JETI Duplex DS-24 EX Carbon Line Dark ORANGE Multimo
1 x Transmitter JETI Duplex DS-12 EX Multimod BLACK
1 x Pine wood slat 5.0x5.0x1000 mm
1 x SERVO HOLDER
26,870.60EUR
Manufacturers
Manufacturer Info
Saito
- Other products
Notifications
NotificationsNotify me of updates to SAITO FG-120 TSS Boxer 4T
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce