Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

VSpeak ECU converter KingTech
79.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
2 x	Walnut wood slat 2.0x2.0x1000 mm
2 x	Beech dowels 10 mm x 1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 2.0x1.0x1000 mm
2 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 8.0x6.0x1000 mm
4 x	ABS tube 14.0x10.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
2 x	ABS tube 3.0x2.0x330 mm
3 x	ABS tube 20.0x18.0x1000 mm
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
2 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
2 x	Long pinned hinge (6 uds)
2 x	Nylon hinge 15x0,3 (10 pcs)
3 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x	Flap hinge 33x9 mm (6 pcs)
3 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
3 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x	Gates hinge
1 x	Propeller POWER-PROP 14x9 Izda
2 x	25 mm reinforced hinge
2 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	15 mm reinforced hinge
1 x	LASER 73" 1.85m (05) PILOT
1 x	Miniature brass strap hinge, 1 m
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Small pinned hinge (12 uds)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
2 x	Gates hinge aluminium (1 pcs)
1 x	Straightened rod Ø 14.0 mm x 1000 mm
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
3 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	1/12 Pilot "Tom"
1 x	Painting GHT Lexan Black 150 ml
1 x	M3-M4 rubber washer (8 pcs)
1 x	Gold antispark 5,5 mm plug
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Turbo light spinner cap white 32mm
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Extension silicon 35 cm male (Futaba)
1 x	Spinner propeller pleg. 38 mm / 5 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Recessed MPX connector support (6 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Flap hinge (6 pcs)
2 x	ABS tube 8.0x7.0x1000 mm
1 x	Frontal Adapter for AXI53xx
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	ABS tube 5.0x4.0x156 mm
1 x	3,2 mm Prop Adapter M5
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
2 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	ABS tube 3.0x2.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
2 x	ABS tube 6.0x4.0x1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Fiberglass tube 6/4x1000mm
2 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
2 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
2 x	Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Blades 330mm
1 x	ABS tube 12.0x10.0x1000 mm
2 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x	Small flex hinge (12 uds)
4 x	Gates hinge 30x16 mm (2 pcs)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Indoor hinge with servo arm integraded
2 x	Large flex hinge (12 uds)
2 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	BLUE Colored Liquid smoke for turbine 0.75 l
1 x	GPS Altis
1 x	Telemetry interface ALTIS 12 cm
1 x	Telemetry interface ALTIS 20 cm
1 x	Altimeter Altis V4
1 x	HITEC Power Supply 30A. Max. 540w
1 x	Telemetry interface ALTIS 6 cm
2 x	Telemetry interface ALTIS to Futaba
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	3,0x60 mm allen screwdriver
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
2 x	Medium pin type hinge (12 uds)
1 x	Propeller MEJZLIK 21x10 Electric light (36 g)
1 x	2 mm Prop Adapter M5
1 x	Propeller MEJZLIK 20x10 Electric light (36 g)
1 x	Propeller MEJZLIK 22x10 Electric light (36 g)
1 x	2,3 mm Prop Drive Günther M4
1 x	20x15 Falcon electric V2
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	ABS tube 10.0x8.0x1000 mm
1 x	PropCover 16-20" (2 pcs)
1 x	PT 22x10 EL Propeller
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Propeller POWER-PROP 14x9
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x	2,5x60 mm allen screwdriver
1 x	4 LiPo XH>EH adapter
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	5 LiPo XH>EH adapter
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	PT 20x13 EL Propeller
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
2 x	18 mm reinforced hinge
2 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Wing Joiner ULTIMATUM 2.0 m
2 x	Long pinned hinge (12 uds)
2 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Cotton Flocks, bag/ 500 g
1 x	Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Small pinned hinge (6 uds)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Carbon plate 350x150x1.0 mm

4,449.67EUR