Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » ROI142KS

15.06EUR

Opto Gas Engine Kill Switch
[ROI142KS]

This kill switch is Optically Coupled to isolate your ignition system from your radio system. (No Interference!!) this device features the following:

•Includes a remote mountable bright LED to indicate when the ignition is armed.
• Optically Coupled input/output is Isolated.
• 8 Bit PIC Controller.
• Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input.
• Up to 20 Volt 15 amp MOS-FET output.
• DSP Noise/Loss of signal Filtering.
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires, universal connectors.
• Small and light weight – only 12 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

enought units

Reviews

Customers who bought this product also purchased

Propeller MENZ-S 17x10 enought units	Propeller MENZ-S 18x12 enought units	Cylidric hinge 33 mm Ø 2 mm (5 pcs) enought units
MPS Gas-Cap-Powerswitch enought units	Propeller MENZ-S 18x8 enought units	Straightened rod Ø 1.0 mm x 1000 mm enought units

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

VSpeak Modulo Glasses JETI
151.25EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
2 x	Walnut wood slat 2.0x2.0x1000 mm
2 x	Beech dowels 10 mm x 1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 2.0x1.0x1000 mm
2 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 8.0x6.0x1000 mm
4 x	ABS tube 14.0x10.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
2 x	ABS tube 3.0x2.0x330 mm
3 x	ABS tube 20.0x18.0x1000 mm
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
3 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
2 x	Long pinned hinge (6 uds)
2 x	Nylon hinge 15x0,3 (10 pcs)
3 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x	Flap hinge 33x9 mm (6 pcs)
3 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x	Fast'n EZ-CA-Hinge, lite (12 uds)
3 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x	Gates hinge
1 x	Propeller POWER-PROP 14x9 Izda
2 x	25 mm reinforced hinge
2 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
2 x	15 mm reinforced hinge
1 x	LASER 73" 1.85m (05) PILOT
1 x	Miniature brass strap hinge, 1 m
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
2 x	Small pinned hinge (12 uds)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
2 x	Gates hinge aluminium (1 pcs)
1 x	Straightened rod Ø 14.0 mm x 1000 mm
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
3 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
2 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	1/12 Pilot "Tom"
1 x	Painting GHT Lexan Black 150 ml
1 x	M3-M4 rubber washer (8 pcs)
1 x	Gold antispark 5,5 mm plug
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Turbo light spinner cap white 32mm
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Extension silicon 35 cm male (Futaba)
1 x	Spinner propeller pleg. 38 mm / 5 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Recessed MPX connector support (6 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Flap hinge (6 pcs)
2 x	ABS tube 8.0x7.0x1000 mm
1 x	Frontal Adapter for AXI53xx
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	ABS tube 5.0x4.0x156 mm
1 x	3,2 mm Prop Adapter M5
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
2 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	ABS tube 3.0x2.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
2 x	ABS tube 6.0x4.0x1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Fiberglass tube 6/4x1000mm
2 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
2 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
2 x	Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Blades 330mm
1 x	ABS tube 12.0x10.0x1000 mm
2 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
2 x	Small flex hinge (12 uds)
4 x	Gates hinge 30x16 mm (2 pcs)
1 x	Pin hinge 26x11 mm (10 uds)
2 x	Indoor hinge with servo arm integraded
2 x	Large flex hinge (12 uds)
2 x	ROBART POINT HINGE 4,7mm (5 pcs)
2 x	Micro flex hinge (12 uds)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	BLUE Colored Liquid smoke for turbine 0.75 l
1 x	GPS Altis
1 x	Telemetry interface ALTIS 12 cm
1 x	Telemetry interface ALTIS 20 cm
1 x	Altimeter Altis V4
1 x	HITEC Power Supply 30A. Max. 540w
1 x	Telemetry interface ALTIS 6 cm
2 x	Telemetry interface ALTIS to Futaba
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	3,0x60 mm allen screwdriver
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
2 x	Medium pin type hinge (12 uds)
1 x	Propeller MEJZLIK 21x10 Electric light (36 g)
1 x	2 mm Prop Adapter M5
1 x	Propeller MEJZLIK 20x10 Electric light (36 g)
1 x	Propeller MEJZLIK 22x10 Electric light (36 g)
1 x	2,3 mm Prop Drive Günther M4
1 x	20x15 Falcon electric V2
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	ABS tube 10.0x8.0x1000 mm
1 x	PropCover 16-20" (2 pcs)
1 x	PT 22x10 EL Propeller
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Propeller POWER-PROP 14x9
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x	2,5x60 mm allen screwdriver
1 x	4 LiPo XH>EH adapter
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	5 LiPo XH>EH adapter
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	PT 20x13 EL Propeller
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
2 x	18 mm reinforced hinge
2 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Wing Joiner ULTIMATUM 2.0 m
2 x	Long pinned hinge (12 uds)
2 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Cotton Flocks, bag/ 500 g
1 x	Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Small pinned hinge (6 uds)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Carbon plate 350x150x1.0 mm
1 x	Round flex hinge (12 uds)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Device Terminal

4,531.14EUR