1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Blade Holder Full (3 blades)
1 x Tail tube RAINBOW
2 x Blade Holder Full (4 blades)
2 x 4 blades set
2 x 3 blades set
1 x Blades 330mm
1 x Steering lever
2 x Cierva C30 Elevator
1 x Blade holder lower
1 x Head core
1 x Blade holder upper
1 x Screw M3x16
2 x Head upper part
1 x Cierva C30 Body Spain
2 x Screws flush mount M2
1 x Wheel keeper washer
2 x Raer wall
1 x Head core bushing
1 x Servo Fork
1 x Big Crow DLE-170M
1 x Silent-blocks DLE 170M
2 x Blade Holder (3 blades)
1 x Rudder
1 x Rotorshape Elevator
1 x Fuselage Autogyro RAINBOW
1 x Nut M1,6
1 x Nut M2
1 x Nut M2 securing
1 x Screws M1,6x6 Allen
1 x Complet landing gear
1 x Head spacer
2 x LA500 Autogyro
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Program card KAVAN PRO
1 x PHASOR RACE 2035/4100 1D
1 x Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x Radial mount for electric 2.5-5.6
1 x Motor MVVS 5.6/690 GLIDER
1 x Motor MVVS 2.0/1120
1 x Axi for MVVS 3.5 Sport
2 x XPower XC5030/14 LS
1 x PHASOR RACE 2035/2100 2D
1 x XPower XC4226/12 LS
1 x Motor XPower F2915/12 XLight
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x ABS 500 x 400 x 0,5 mm (white)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x ABS 500 x 400 x 2,0 mm (white)
1 x 90 mm rods + T patellas set for direction control
1 x 45 mm rods set for direction control
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x Cockpit aluminium closing
1 x Cockpit aluminium closing 5.4g
1 x Cockpit aluminium closing 4.7g
1 x A/C quality beech plywood 600x300x0.6 mm
1 x Jet Afterburner Simulator NF-Jet2
1 x Jet Afterburner Simulator NF-Jet3 RY
1 x Heat sink for Optotronix LEDs
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x Balsa panel 4.0x100x1000 mm
1 x Propeller APC 12x4.5 MR
1 x Kit wheel loader 966G II without electrics, without hydrauli
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x Resistor 3W 5% OR47
1 x Jet Afterburner Simulator NF-Jet1RY Set
1 x Jet Afterburner Simulator NF-Jet3 YSW
1 x Resistor 3W 5% OR82
1 x Cover cap drop-shaped paintable 43 mm
1 x Jet Afterburner Simulator NF-Jet2YY Set
1 x Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x Resistor 3W 5% 2R2
1 x Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x Control for forward wheel (MINI)
1 x Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs)
1 x NF-3X-350 set
1 x NF-3X-80 liner Kit
1 x Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x NF-3m Heli Kit
1 x Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
1 x Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs)
1 x NF-3 RC set
1 x NF-1 RC set
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)
1 x Covered closure or fairings
1 x NF-3XL set
1 x Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x USB Interface Adapter
1 x A/C quality beech plywood 600x300x8.0 mm
1 x A/C economy plywood 600x300x6+.0 mm
1 x Balsa panel 2.0x100x1000 mm
1 x Propeller APC 10x6 Electric
1 x Propeller APC 11x4.7 SF
1 x Propeller APC 10x4.5 MR
1 x Complete kit CAT 966G II WEDICO-construction-models
2 x 
1 x Indoor Brushed motor kit
12,407.49EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies