4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

XT-60  connector (female)
XT-60 connector (female)

temporarily out of stock
temporarily out of stock

XT-60  connector (male)
XT-60 connector (male)

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Extinguisher CO2 - 2 Kg
2 x Servo NARO Max Std
1 x 30 cm BEC cable (female)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x CC 01
1 x BEC 3A FOXY
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Adapter lead MPX/EC3
1 x CC 05
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x XH female balance (5S) connector (2 pcs)
1 x Screwdriver for Torx® TX8
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Futaba male 40 cm extension
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x ABS tube 5.0x4.0x156 mm
1 x ABS tube 12.0x10.0x1000 mm
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Parachute expulsion foam
1 x 3,2 mm Prop Adapter M5
1 x 4 mm Prop Adapter M6
1 x PPS-4D Propeller
1 x Glow starter with charger 230v
1 x PowerBox MAG Sensor
2 x 2,3 mm Prop Adapter M6
1 x PowerBox Cockpit SRS (incl. SensorSwitch)
1 x 3 mm Prop Adapter M6
1 x POWERBOX Magic Jeti Switch Royal SRS, Champion SRS
1 x Hovercraft sailcloth
1 x 3.2 mm Prop Adapter M6
1 x DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x PowerBox Competition
2 x 3,2 mm Prop Adapter M8
1 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x DPSI RV Mini 6 (2008)
2 x 4 mm Prop Adapter M8
1 x DPSI RV Mini 6 Magic
2 x DPS Switch JR/JR
1 x DPSI Ampere & Voltage bundle
1 x DUPLEX 2.4EX Central Box 210
1 x Female connector for 12 pines AWG
1 x JETImodel Addcap 1640
1 x Landing gear axle Ø 4 mm (2 uds)
3 x USB Interface REVOLECTRIX for CellPRO 10s
1 x Connector Sub-D 2+5 Female
1 x EWC6 40 cm wing connector
1 x Connector Sub-D 2+5 Male
1 x Landing gear axle Ø 5 mm (2 uds)
1 x PWC4 wing/fuselage connector for 4 servos
2 x SPARK Switch 12v
1 x Male connector for 10 pines AWG
1 x Double conector with JR adapter and 200 mm extension
1 x EWC3 100 cm wing connector
1 x Logo 400 SE VBar
1 x LOGO 600 SX (kit)
1 x M3 Maxi ball link (2 uds)
1 x Spinner INO 57 mm Chrome (Imitacion metal)
1 x Locking cable tie 2.5x100 (uds)
1 x F3A carbon 82 mm spinner for 12 mm axis
1 x Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x 57 mm INO spinner (carbon imitation)
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x Metalic motor holder for class 550-600
1 x Central support Speed 600
1 x Fiberglass motor-holder for electric motors
1 x Prop Shaft Adapter 8 mm/M12 "long"
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x F3A carbon 95 mm spinner
1 x Adapter 4,0 mm M6
1 x Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x Spinner INO 70 mm Chrome (Imitacion metal)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x 3 mm Long Prop Adapter M5
1 x Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x Locking cable tie 3.2x142 (uds)
1 x 89 mm INO spinner (carbon imitation)
1 x 45 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x 3 mm Short Prop Adapter M5
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x 2,3 mm Prop Drive Günther M4
1 x Spinner Alumin. fixed propeller 45 mm / 3,2 mm
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Spinner INO 75 mm Chrome (Imitacion metal)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Spinner INO 89 mm Chrome (Imitacion metal)
1 x Nut for 515/518/519 spinner special for Hacker
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x Adapter 3,2 mm M6
1 x Spinner INOVA 102 mm Black
1 x 38 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Spinner INO 82 mm Chrome (Imitacion metal)
1 x Couple M4 for wire (10 pcs)
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x 2,3 mm Prop Adapter M5
1 x Spinner INO 63 mm Chrome (Imitacion metal)
1 x Falcon Carbon Spinner 82mm for electric motor
1 x Adapter 3,2 mm M8
1 x 102 mm INO spinner (carbon imitation)
1 x VTX 477 Carbon Rotorblade
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Program 5v SIO RS 232
1 x Servo Controller Fibra optica
1 x 9x4.7 * 22x12 carbon propeller
1 x IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x SERVO DES 588 BB MG
1 x Hacker A30-S Radial Set
1 x Motor holder AXI
1 x Receiver bed (Blue)
1 x Frontal support Speed 600
1 x Size "M" motor holder for class 600
1 x Size "L" motor holder for class 600
1 x Radial heatsink for MPJ AC25/35-xx motor
1 x Cooler motor type 400
1 x Electric coversion set
1 x Motor mount for 1200 mm models
1 x 
1 x 3.2 mm Prop Adapter M8
1 x Extension for LC-Display 50cm
1 x PowerBox Voltage Regulator (linear)
1 x PowerBUS Lead 90 cm
1 x External LED's (2 pcs)
1 x PowerBox 12
1 x Extension for SensorSwitch 60cm
1 x PowerBox MagSensor black connector SRS/Champion
1 x Charging Extension 50cm for 2 Battery
1 x 2 piece mounting frame
1 x PowerBUS Lead 200 cm
1 x PowerBox OLED display
1 x PowerBox Spare part magnetic sensor
1 x PowerBUS Lead 60 cm
1 x SPARK Switch 5.9v
1 x PowerBUS to PWM
1 x DPSI magnetic switch actuator (PCB)
1 x DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x APM2.6 Power module with 5.3V DC BEC
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Crystal Universal RX 35.050 Ch 65
1 x UBEC 6A KAVAN
1 x Extension 2/3 lipos JST/C
1 x Hacker X-Pro USB interface V2
1 x Electronic switch JETI SP6 0-15v/6A
1 x Adapter lead MPX/XT60
1 x CC 03
1 x DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC)
1 x Crystal Universal RX 35.090 Ch 69
1 x JETImodel SINGLE BEC
1 x Propeller 8x4 Electric
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Crimping tool
5,721.44EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies