109.00EUR

GRE-18 RTR Crawler 1:18 Blue
[KAV06GRE18B]


Fully assembled 1/18th scale RC crawler model, including electronics and battery pack. Perfect size for both outdoor and indoor off-road driving.

Enter the scale crawler world with our brand new models GRE-18
Perfect size.
The new range of 1/18th scale RC crawlers brings you the best of both big and small RC cars. From the bigger scale models, it inherits the outdoor ability, so it's good for a walk in nature, or a real expedition, while still having a compact size like its smaller relatives. This means you can pack it into any backpack and have it with you anywhere, anytime. And when the weather doesn't allow being outside, an adventurous course, full of obstacles can be found even in your living room!
Scale look.
Thanks to a cool bodyshell with scale accessories, the GRE-18 models are great to look at. Distinctive paint with transparent windows is complemented by molded bumpers, front grille, snorkel, side mirrors, roll cage and rear light covers. When turned on, the car comes to life by in-built LED lights. They have enough power for you to be able to drive in a dark, which provides an amazing atmosphere and a whole new experience.
For any terrain.
A tough metal frame, together with 4-link suspension system and soft dampers, provides enough ground clearance, angles and articulation for overcoming obstacles of the outdoor driving. Full time 4WD system, closed differentials and soft tires with deep thread will always deliver the traction you need. On the top of that, water-resistant electronics mean, you don't have to worry about any conditions - rain, mud, puddles, or deeper streams - nothing is going to stop you!
Always under control.
A strong motor is effortlessly tamed by reduction gearbox. Digital servo and quality remote control system will give you confidence and precision. The transmitter features a necessary settings for center trims, channel reverses and end point adjustment and thanks to an easy disassembly it won't take any extra space.
Ready for action.
Powerful battery pack with a capacity for up to 45 minutes run time and compact USB charging cable, that can be plugged into any mobile phone charger will keep you going at all times. Any time you find a tempting challenge, you will be ready.

Features
Great scale-looking lexan body shell with distinctive paint and transparent windows
Molded accessories like the front grille, side mirrors, snorkel, roll cage and more
Adjustable bumpers and body mounts
Realistic front and rear lights
Strong metal frame
4-link chassis with great articulation like on full-scale models
Long travel dampers with soft springs
Full-time 4WD system with 104:1 final drive ratio for great low-end torque and control
Locked differentials for excellent crawling performance
Realistic tires with soft rubber and good thread for any terrain, mounted on bead-lock rims
55T brushed motor with upgraded power
Chassis mounted 1Kg 3-wire digital waterproof servo for precise control
Fully waterproof receiver and ESC for any weather conditions
Free AUX port for additional lights, or FPV system
600mAh 7.4V 2S Li-Po battery pack, which lasts up to 45 minutes
Quality 2.4GHz digital radio system featuring digital trims, reverse and end point adjustment EPA
Transmitter can be disassembled to fit even smaller space
Compact USB charging cable
Available option parts

KAV06240071 GRE Aluminum Upgrade Shocks Set
KAV06240072 GRE Steel U-Joint Cross Ball Set
KAV06240074 GRE18 Steel U-Joint Drive Shaft Set
KAV06240079 GRE Optional Brass Wheel Weight - 24g

Technical data
Motor: 050 55T
Servo: 1Kg digital (3-wire)
Battery: 600mAh 7.4 2S Li-Po
Charger: USB 150mA
RTR set includes
Fully assembled GRE-24 vehicle with painted body and battery pack
Transmitter
USB charging cable
Wheel nut wrench
Screwdriver
Binding jumper cable
Spare springs
Instruction manual
Required for operation

4xAAA batteries for the transmitter

Wheelbase [mm] 155
Width [mm] 113
Length [mm] 275
Height [mm] 135
Weight [g] 280
Ground clearance [mm] 34
Wheel diameter [''] 2.2
Drive 4x4
Gear ratio 104:1
Motor type DC
Li-Po [čl.] 2
Chassis type Off-road,Crawler,Hobby


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Vasa model Catapult
1 x Connectors banna oro 4 mm (M/F)
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x XH female balance (3S) connector (2 pcs)
1 x Conector BEC male (10 pcs)
1 x XH female balance (5S) connector (2 pcs)
1 x Connectors banna gold 5,5 mm (M/F)
1 x Connectors banna oro 3,5 mm (M/F)
1 x Connectors banna oro 6,0 mm (M/F)
2 x MPX Sub-D Adaptor
1 x XH male balance (4S) connector (2 pcs)
1 x Connectors DEANS 4 pins (1 pair)
1 x 30 cm DEANS female connector
1 x XH female balance (4S) connector (2 pcs)
1 x Connectors banna oro 3 mm (M/F)
1 x 2 mm male connector (2 pcs) with safety connector
2 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x XH male balance (2S) connector (2 pcs)
1 x Bungee HLG Premium
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Connector CAN 15
1 x Optotronix Aurora Plug
1 x Wing connector 8pin with pin strip, plug & socket
2 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x XH female balance (2S) connector (2 pcs)
2 x XH male balance (3S) connector (2 pcs)
2 x Conector BEC female (10 pcs)
1 x Conector Servo female 4 pines
1 x 20x1000 mm Ring Strap Back To Back
1 x SE Ring 350 mm (2 pcs)
1 x SE Ring 250 mm (2 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Tape GFK 25 mm
1 x Strip ABS 2.0x5.0x1000 mm
2 x Round Rod 6,0x1000 mm
1 x Small Crow DLE-170M
1 x Silent-blocks DLE 170M
2 x Round Rod 1,5x1000 mm
1 x Strip 2,5x1,25x330 mm
3 x Round Rod 4,0x1000 mm
1 x Motor DLE 200cc Std
2 x Strip ABS 2.0x3.0x1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x Circlik for shaft 1.5 mm (10 pcs)
2 x Aluminium wide washer M3 red (4 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Flat washer 2.7 mm (20 uds)pcs)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Lock washer 4.3 mm (20 pcs)
1 x Flat washer 1.7 mm (20 pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
2 x Spring lock washer 4.1 mm (20 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Flat washer 2.2 mm (20 pcs)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Quicklock washer 2 mm (10 pcs)
1 x M3 black washers (4 pcs)
1 x XH male balance (7S) connector (2 pcs)
1 x XH female balance (8S) connector (2 pcs)
1 x MR30 connector male
1 x Support conector MPX (6 pcs)
2 x Recessed MPX connector support (6 pcs)
2 x Soporte grifo FESTO (2 pcs)
1 x Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x DYNAMOMETER S-1580
1 x ABS Strip 1.0x3.0x1000 mm
1 x Round Rod 1,0x1000 mm
1 x Strip 2,0x2,0x330 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x Strip 1,5x1,5x330 mm
1 x Horn 16,5x20 mm (2 pcs)
1 x Horn mando long (2 pcs)
1 x Horn DUBRO 1/2A
1 x Brass control horn M3 short for wire (2 pcs)
1 x Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x Profile ABS half cane 2.5x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x ABS "T" angle 4.0x4.0x1000 mm
2 x Conector MT-60 (pair)
2 x Conector FUTABA Servo male (10 pcs)
1 x Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x Round Rod 2,5x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x Round Rod 5,0x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x Socket Screw M3x9 mm
1 x Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
1 x Blind nut M5 (4 pcs)
1 x 10 mm floating pad (72 pcs)
1 x Socket Head Screw M2x12
2 x Socket Head Screw M2x8
1 x Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x Screw M3x30 (10 pcs)
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x Pan Head Screw M2x8 PH
1 x Hardener Aero EPH 161 (250 g)
1 x Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
1 x resin-hardener L-385 H-385 (625 g)
1 x Hardener P-25, canister 2.5Kg
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Screw M2.5x10 (10 pcs)
1 x Conector XT-150 6mm (Set: 5 pares)
1 x Conector FUTABA Servo female (10 pcs)
1 x Conector JR Servo female (10 pcs)
1 x Size "M" motor holder for class 400
1 x Fiberglass motor-holder for electric motors
1 x Fan for A60
1 x 
1 x Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x Motor A20-20 L EVO
1 x Motor A50-14 L 8-Polos Electric turbine
1 x 6 mm aluminium horn with patella
1 x Motor A30-14 M V2 6 Poles
1 x Motor A60-5XS V4 28-pole kv420
1 x Motor B40-10 L
1 x Shaft for A60-L (140mm)
1 x Gold antispark 5,5 mm plug
1 x Hovercraft sailcloth
1 x Horn F3A de Titanium 16 mm (2 units)
1 x Brass control horn M2 short for wire (2 pcs)
1 x Horn 6/35 with M3 Bearing
1 x PARAGON Trainer 46-55 1580 mm
1 x BOOMERANG II 40/46 ARF 1.55mm
2 x Support pumb/filter Xicoy X45
2 x Support pump Xicoy X45
1 x Horn for flap control (1 pcs)
1 x Brass control horn M4 long for wire (4 pcs)
1 x Conector JR Servo male (50 pcs)
1 x Conector XT-30 (hembra)
1 x Bag connector 2 mm
1 x Motor holder AXI
1 x Size "M" motor holder for class 600
1 x Cooler motor type 400
1 x Frontal support Speed 400/480
1 x Cooler motor type 280
1 x Motor mount for 1 m models
1 x Ø 28 mm fiberglass motor-holder for electric motors
1 x Motor holder for AC 28/7
1 x Size "L" motor holder for class 600
1 x Bearings for motor HACKER C50
1 x Motor HP 220/30/A3 P4 5:1
1 x Hacker A30-S Radial Set
1 x Cables suitable for the motor AC 28/7
1 x Cooler motor type 150
1 x Electric coversion set
1 x A50 Motor Mount Alu complete set
1 x Ø 38 mm fiberglass motor-holder for electric motors
1 x 
1 x Size "M" motor holder for class 400
1 x Motor Mount for Multiplex FunJet
1 x Hysol Mixing Caps SET with 10
1 x Motor mount for 1200 mm models
1 x Shaft for A60-XS-V2 (112,5mm)
1 x A40-10S V2 8-Pole + 6,7:1 PG
1 x Motor A60-7XS V4 28-pole kv330
1 x Motor OS 3820-1200 electric
1 x Motor A10-7 L 4,4:1
1 x Motor B20-10 L + 4:1 gearbox
1 x Motor A20-6 XL 10-Pole EVO + 4,4:1
1 x Motor OS 3805-1200 electric
1 x Motor A200-6
1 x Motor A30-10 XL V4
1 x Motor A50-10L Turnado V3 Glider
1 x Axle for motor A30-XL V2
1 x Motor A30-12 XL Glider
1 x Backmountset complete A40
1 x Motor B40 10L + MAXON 4,4:1 Keramik
1 x Motor A60-6XS V4 28-pole kv370
1 x 
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Support Pitot JETI
1 x Support XT60 conector (2 pcs)
1 x Soporte grifo FESTO vertical (1 pcs)
1 x CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
1 x Starter EM Gear Power 250
1 x Support Filtro FESTO
1 x Support FUEL DOT V3
1 x BULLIT Wing 840 mm
2 x Soporte filtro FESTO (4 pcs)
1 x Angle support XT60 conector
1 x Air Intake manifold 90° - Large
1 x Profile ABS half cane 2.0x1000 mm
1 x Support Antena 2.4 Ghz (2 pcs)
1 x TRAINER RC Pilot V2 90" w/r ARF
1 x Tube support Ø 6mm (10 pcs)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Boomerang ELAN STARS & STRIPES Combo
1 x Boomerang ELAN THUNDERBIRD Combo
1 x ASPIRE Red ARF 2.000 mm, Fuselage
1 x ASPIRE Navy ARF 2.000 mm
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re
1 x Retract/Brake Cable
1 x F-16 Falcon Black Knights 1:6 (1630 mm)
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Electromagnets brake
1 x GS-200 Electronic
1 x Digital weight, angle and balance meter BASIC
1 x Set Legs + Wheels with brake ASPIRE
1 x Brake disc Electron Retracts
1 x HAWKER HUNTER 1:5,8 Desert (1.770mm)
1 x F9F COUGAR Red ARF 1.562 mm
1 x ASPIRE Red ARF 2.000 mm, Canopy
1 x F-4 Phantom Scale 1:7, Electric retract landing gear
1 x F-16 Scale 1/6 G3 Airex Deco: AF 916F
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Katana Mini carbon wheel pants (2 pcs)
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x 100 Newtons FEMA absorber
1 x Mudguard for 140/165 mm wheels
1 x Wheel collar 5 mm Ø (4 uds)
1 x ABS I Strip 20x10x1000 mm
1 x Nut for mounting M2 (4 pcs)
32,634.16EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies