2 x | Balsa panel 2.0x100x1000 mm |
1 x | Balsa panel 10x100x1000 mm |
2 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Extension MPX-MPX 20 cm |
1 x | Adaptadores carga 6s JST-XH |
2 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Conector MR-60 (pareja) |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
1 x | Crimping tool |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | Turbina KINGTECH K320 G5 |
1 x | DYNAMOMETER S-1580 |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Screw-lock connector M2 (2 uds) |
2 x | Steering arm 16 mm Ø 3 mm |
1 x | Cabin latch Fox MDM1 4m (pair) |
2 x | SUS wire 3m (nylon coated) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
2 x | Cockpit plastic closing |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | One touch canopy lock |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
2 x | Locking cable tie 2.5x100 (uds) |
2 x | Steering arm 12 mm Ø 4 mm |
1 x | Canopy Latch |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | Covered closure or fairings |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
2 x | ABS angle 4,0x4,0x1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Spray Graphit 33 |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | 4 mm Prop Adapter M8 |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | La Capitania di Venetia accesories |
1 x | Prop Shaft Adapter 5 mm "long" |
1 x | 3.2 mm Prop Adapter M6 |
1 x | Dumper propeller 6/8 mm |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Servo KST A08H V6.0 3,2Kg HV |
1 x | Servo HITEC D625 MW |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
2 x | Servo MKS 6100 DS |
1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Servo HITEC D645 MW |
1 x | White smoke canister 140 g |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Servo HITEC HS-5585MH |
1 x | HITEC DPC-11 programmer |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
1 x | Servo inverter |
1 x | Servo KST X10-710 V8.0 7.5Kg HV |
1 x | Gear set HITEC HS-225 |
1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
1 x | Gear set HITEC HS-85 |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Servo HITEC HS-325 BB |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
2 x | Servo SAVOX SV-1261 MG |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
2 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Servo SAVOX SB-2290 SG |
1 x | Red aluminium double servo arm FUTABA 2,5inch M3 |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
2 x | Hitec 25 mm servo arm with M3 ball link |
1 x | SERVO DES 658 BB MG |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Cockpit metalic closing |
2 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | Horizontal servo holder |
1 x | PPM Encoder Module |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
1 x | Spinner black 40-45mm |
1 x | Spinner 4BL 4 blades pleg. prop 40 mm / 4,0 mm |
1 x | Spinner propeller pleg. 38 mm / 6,0 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner propeller pleg. 36 mm / 4,0 mm |
1 x | Spinner plastic white fixed propeller 42 mm |
1 x | Spinner propeller pleg. 40 mm / 2,0 mm |
1 x | Servo MKS HV 777A+ |
1 x | Spinner black 36-38 mm |
1 x | Spinner propeller pleg. 45 mm / 4,0 mm |
1 x | White spinner propeller pleg. 55 mm / 5 mm |
1 x | Spare white 38-45 mm spinner |
1 x | White spinner propeller pleg. 36 mm / 4 mm |
1 x | Servo HITEC HS-5085 MG Digi |
1 x | Servo MKS HV1220 |
1 x | Allen wheel collar M4x4 |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Servo HITEC HS-70 MG |
1 x | 4 mm Prop Adapter M6 |
1 x | Servo HITEC HS-5485 HB Digi |
1 x | Servo KST MS825 V8.0 35kg 8.4v |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Servo SAVOX SV-0236 MG HV |
1 x | Servo SAVOX SA-1256 TG |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | Propeller POWER-PROP 14x9 Izda |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
|
11,984.43EUR |