1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Propeller balancer |
1 x | Medidor ángulos y/o incidencias |
1 x | WingFix ULTRA Black Edition |
2 x | Beech dowels 3.0 x 1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Stickers-digit for marking |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Propeller POWER-PROP 14x9 |
1 x | Propeller POWER-PROP 13x9 |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | Smoke set "M" |
1 x | Tape GFK 50 mm |
1 x | Small aluminium horn blue (2pcs) |
1 x | Ply-Span 450x600/13g Orange |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Ply-Span 450x600/13g Yellow |
1 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | BALSA triangular 6x6x1000 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
2 x | BALSA trip 10x10x1000 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Balsa panel 5.0x100x1000 mm |
2 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Balsa panel 10x100x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Mudguard wheels 112/127 mm |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Spray adhesive AEROFIX 2 |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Partall paste 650 g |
1 x | Manometer 4 mm |
2 x | MZ-12, 6 Channel HoTT |
2 x | Quick hose connector 6-4 mm |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Racor 2/3 mm |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Decorative caps, multicoloured, short |
1 x | Receiver replacement antenna, approx. 15 |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Adjustable brass horn threaded M3 |
1 x | Coupling bush 5 - 5 mm |
1 x | Charger LiPo Charger4 |
1 x | Xplorer3 anemometro |
1 x | 3D Spinner for DLE 30 |
1 x | Spinner 80 mm GFK |
1 x | 3-Blade Spinner 70 x 70 mm GFK |
1 x | MZ-18, 9 Channel HoTT |
1 x | 76 mm aluminium spinner. |
1 x | Spinner 115 mm GFK |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | FIALA Propeller 19x12 Electric |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Cyanoacrylate MD GLUE plus 405, for extreme loads 20g |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Spinner 159x200 mm GFK |
1 x | 95 mm aluminium spinner. |
1 x | Spinner PC-21 JMB-Jets red 3 blade |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Spinner 90 mm GFK |
1 x | Spinner 105 mm CFK |
1 x | Canopy Latch |
1 x | Hose clips 6 mm |
1 x | Receiver replacement antenna, approx. 85 |
1 x | Decorative caps, multicoloured |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | Flap hinge (6 pcs) |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | 89 mm aluminium spinner. |
1 x | Spinner 60 mm GFK |
1 x | POLARON EX 800w charger |
1 x | Transmitter GRAUPNER MZ-24 Pro |
1 x | 50 mm aluminium spinner (Kavan) |
1 x | 64 mm aluminium spinner |
1 x | Spare screw M3 6pcs. |
1 x | Spinner 105 mm GFK |
1 x | Spinner 100 mm GFK |
1 x | 3-Blade Spinner 70 x 84 mm GFK |
1 x | Spinner 90 mm CFK |
1 x | Fiberglass spinner Ø125mm fixed by a central screw |
1 x | 90 mm CFK long Spinner fixed by a central screw |
1 x | Nut hélice Largo 2.25" (5.7 cm) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | 55 mm aluminium spinner (Kavan) |
1 x | 60 mm aluminium spinner (Kavan) |
1 x | 51 mm aluminium spinner. |
1 x | Xplorer4 anemometro |
1 x | Xplorer2 anemometro |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | 57 mm aluminium spinner. |
1 x | Spinner 100 mm CFK |
1 x | 38 mm aluminium spinner. |
1 x | 70 mm aluminium spinner. |
1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
1 x | Spinner 104x131 mm 115 g CFK-BS |
1 x | 3-Blade Spinner 85 x 80 mm GFK |
1 x | MZ-10, 5 Channel HoTT |
1 x | ProgBox PRO LCD Hobbywing |
1 x | Batería LiPo GENS 5000 mAh 5S 18.5V 60C (Gens Ace) |
|
6,041.36EUR |