Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Resin/Gelcoat » R109285AP2

28.85EUR

Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
[R109285AP2]

Epoxy Resin L + Hardener CL (60 min)
Set of two components
The resin system Epoxy Resin L + Hardener CL yields superior impregnating and wetting properties towards carbon, glass, aramid and natural fibres. It is especially suitable for carbon coating of automotive parts.
Low-viscous
High degree of UV stability
Tack-free curing even of thin layers
Glass transition temperature (Tg) > 90 °C (post-curing at 70 °C / 15 h)
High static and dynamic strength (equal to Epoxy Resin L 285 with Hardener 285)
Free of nonylphenol and DETA
Processing time: 60 minutes (100 g / 20 °C)
Mixing ratio:
100 : 30 parts by weight resin : hardener
100 : 35 parts by volume resin : hardener
The resin system is ambient curing and develops no distinctive brittleness even at curing temperatures below 20 °C (for at least 48 h). We however recommend, to improve the physical and chemical properties, to perform a post-curing at least at 40 °C over 15 h.
It exhibits a very good price/performance ratio and is suitable for the following processing procedures:
Hand laminating
Vacuum moulding
Press moulding

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Combo KAVAN C3536-1250 + KAVANA R50SB +
59.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Cap Hispano Aviación
1 x	Softshell Hispano Aviación
2 x	Vest clothes Hispano Aviación
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
2 x	Cargador para AA/AAA Ni-MH & Ni-Cd
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	SIMtransmitter 6 Mode 2
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Extension silicon 35 cm (Futaba)
1 x	Suncover 100cc Red
1 x	Cabel "Y" 30 cm (graupner)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Extension silicon 25 cm (Futaba)
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Spikes Band (5 m)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
2 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	ABS tube 16.0x14.0x1000 mm
1 x
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Extension silicon 100 cm (Graupner)
2 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Joint with bearing M2 22x5,5
1 x	Allen wheel collar M3x5
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Tape GFK 50 mm
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	ABS tube 5.0x4.0x156 mm
1 x	Extension silicon 100 cm (Futaba)
1 x	ABS tube 3.0x2.0x330 mm
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Ball link M1.6 (6 uds)
1 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Canopy Latch
1 x	20x1000 mm Ring Strap Back To Back
1 x	Gates hinge
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	Extension 7.5 cm
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Horn mando small (2 pcs)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Miniature brass strap hinge, 1 m
1 x	ABS tube 18.0x16.0x1000 mm
1 x	Extension silicon 50 cm (Graupner)
2 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Ball link M2 (10 pcs)
1 x	Tape GFK 38 mm
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
2 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	6 mm aluminium horn with patella
1 x	Ball link M2,5 (10 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Horn 5/10 with M2 Bearing
1 x	Premium servo extension 100cm
1 x	Glases Nimbus "Black"
1 x	Green smoke canister 65 g
1 x	"S" set for planes
1 x	B4-0 rocket charges (6 pcs)
1 x	Glases Aspen
1 x	Red smoke canister 100 g
1 x	Central support Speed 280
1 x
1 x	Motor mount for 1200 mm models
1 x	Motor Mount for Multiplex FunJet
2 x	EasyFLY Addon
1 x	Micro Crystal RX 35.120 Ch 72
1 x	Hacker A30-S Radial Set
1 x	Crystal Universal RX 35.120 Ch 72
1 x	Receiver bed (Blue)
1 x	Ø 28 mm fiberglass motor-holder for electric motors
1 x	Indoor motor holder
1 x	Electric coversion set
1 x	10 mm gas motor standoff
1 x	Propeller APC 11x7 SF
1 x	Propeller APC 10x5 Electric Pusher
1 x	Propeller APC 12x6 SF
1 x	Propeller APC 10x3,8 SF
1 x	Propeller APC 10x10 Electric
1 x	Propeller APC 11x10 Electric
1 x	Propeller APC 11x5.5 Electric
1 x	Propeller APC 10x3,8 SF Electric Pusher
1 x	Propeller APC 12x10 Electric
1 x	Propeller APC 11x4.7 SF
1 x	Propeller APC 10x4.7 SF Pusher
1 x	Propeller APC 13x4 Electric
1 x	Propeller APC 11x4.7 SF Pusher
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Charger LiPo Charger4
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	SUS wire 3m (nylon coated)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	One touch canopy lock
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	M3 Maxi ball link (2 uds)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Thixotropic agent TM 100, tin/ 415 g (approx. 5 l)
1 x	Balsa panel 1.0x100x1000 mm
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	Blue metalic ball link M3/3 azul (2 pcs)

1,475.75EUR