Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Hélice BIELA 16x8 3Bl Pusher (Tripala)
68.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

5 x	Listón de PINO 3,0x5,0x1000 mm
4 x	Listón de BALSA 3,0x3,0x1000 mm
3 x	Listón de PINO 10x10x1000 mm
2 x	Listón triangular de BALSA 10x10x1000 mm
4 x	Liston HAYA 3 x 10 x 1000 mm
2 x	Listón de PINO 2,0x10,0x1000 mm
4 x	Listón de HAYA redondo 2,0 x 1000 mm
3 x	Listón de HAYA redondo 3,0 x 1000 mm
2 x	Listón de PINO 3,0x10,0x1000 mm
4 x	Liston de BALSA 8,0x8,0x1000 mm
3 x	Liston HAYA 10 x 10 x 1000 mm
3 x	Listón de HAYA redondo 4,0 x 1000 mm
3 x	Borde Salida BALSA 35x8x1000 mm
4 x	Liston de BALSA 6,0x6,0x1000 mm
3 x	Listón triangular de BALSA 8x8x1000 mm
2 x	Liston de BALSA 10 x 10 x 1000 mm
3 x	Listón de BALSA 4,0x4,0x1000 mm
4 x	Listón de BALSA 3,0x5,0x1000 mm
3 x	Listón de PINO 1,5x3,0x1000 mm
5 x	Listón de TILO 3,0x3,0x1000 mm
2 x	Listón de NOGAL 1,5x1,5x1000 mm
3 x	Listón de PINO 6,0x6,0x1000 mm
2 x	Listón triangular de BALSA 6x6x1000 mm
1 x	Varilla acero Ø 3,0 mm x 1000 mm
2 x	Varilla acero Ø 2,0 mm x 1000 mm
3 x	Varilla acero roscada M3 -1m
2 x	Varilla acero Ø 2,5 mm x 1000 mm
3 x	Varilla acero Ø 1,5 mm x 1000 mm
1 x	Varilla latón Ø 0,5 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 3.5 mm x 1000 mm
2 x	Varilla acero roscada M2 - 1m
1 x	Varilla latón Ø 0,8 mm x 1000 mm
2 x	Varilla acero Ø 8,0 mm x 1000 mm
1 x	Varilla acero Ø 0,5 mm x 1000 mm
1 x	Varilla acero Ø 6,0 mm x 1000 mm
3 x	Varilla acero Ø 5,0 mm x 1000 mm
1 x	Liston ABS 1,5x8,0x1000 mm
2 x	Liston ABS 1,5x4,0x1000 mm
1 x	Liston ABS 1,0x2,0x1000 mm
1 x	Liston ABS 2.0x3.0x1000 mm
1 x	Adaptador 3 LiPos XH>EH
1 x	Adaptador 5 LiPos XH>EH
1 x	Alambre de cobre esmaltado en rojo Ø0,2 mm (5 m)
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Cable USB para programación HLS
1 x	Alambre de cobre esmaltado Ø0,2 mm (5 m)
1 x	APM2,6 Power module con BEC 5,3 V DC
1 x	CC 05
1 x	Prolongador JR/Graupner hembra 40 cm de silicona
1 x	Cable silicona "Y" 30 cm (Graupner)
2 x	Prolongador Futaba hembra 40 cm de silicona
1 x	Circlick seguridad
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Prolongador silicona 10 cm (Graupner)
1 x	Prolongador 15 cm (Futaba)
1 x	Prolongador 100 cm (Futaba)
1 x	Prolongador PVC 150 cm (Graupner)
1 x	Extension silicona 30 cm macho (Futaba)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Prolongador cable servo POWERBOX 25cm
1 x	Oracover Rojo 2 m
1 x	Oracover Rojo Ferrari (2 m)
1 x	Oracover Verde 10 m
1 x	Oracover Negro 2 m
1 x	Oracover CHROME 2m
1 x	Oracover Verde 2 m
1 x	Oracover Gris Seafire Sea 2m
1 x	Oracover ROYAL RED 2m
1 x	Oratex Antik 2m
1 x	MYLAR film A350 (1000x500 mm)
1 x	Ply-Span 450x600/13g Azul
1 x	Oracover Gris claro 2m
1 x	Oracover Blanco 10 m
1 x	Oracover Rojo Fluor (2 m)
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Oracover Naranja 2 m
1 x	Oratex Natural White 2m
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Oratex Yellow Cub 10 m
1 x	Ply-Span 450x600/13g Naranja
1 x	Oracover CARBON Metalic 1m
1 x	Oracover Amarillo CADMIO 2 m
1 x	Equilibrador hélices
1 x	Sistema cierre 400 mm con abrazadera (2 pcs)
1 x	Conector Centralita Optotronix Aurora
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm desmontable (2 pcs)
1 x	Plancha contrachapado Abedul 1520x750x4,0 mm
2 x	Plancha contrachapado Abedul 1520x750x3,0 mm
1 x	Plancha contrachapado Abedul 600x300x3,0 mm
1 x	Plancha contrachapado Abedul 600x300x2,0 mm
2 x	Plancha contrachapado Abedul 600x300x1,2 mm
3 x	Plancha contrachapado Abedul 600x300x5,0 mm
1 x	Cable USB CORTEX DEMON Bavarian
1 x	Plancha contrachapado Abedul 600x300x8,0 mm
1 x	Plancha de balsa 2,0x100x1000 mm
1 x	Varilla acero Ø 1,0 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 3 mm x 1000 mm
1 x	Oracover Azul Cielo 2 m
2 x	Llave bujía NGK MVVS
1 x	Autoarranque EME35
2 x	Encendido GLOW 2C + accesorios
4 x	Listón de BALSA 5,0x5,0x1000 mm
1 x	Depósito "Taxi Tank"
1 x	Sistema de arranque a bordo (9715)
1 x	Conector empalme tubo de combustible (gold)
1 x	Encendido para motor DLE 55
1 x	Encendido completo con captador para DLE 30
1 x	Liston ABS 1,0x4,0x1000 mm
1 x	Fibra carbono molida 100g
1 x	Microbalones 100g (0.20g/cm3 - Aprox 1L)
1 x	Liston ABS 2.0x8.0x1000 mm
1 x	Polvo de algodon 7 Kg
1 x	Liston ABS 1,5x3,0x1000 mm
2 x	Listón de CAOBA 1,5x1,5x1000 mm
3 x	Listón triangular de BALSA 15x15x1000 mm
1 x	Varilla ABS 4,0x1000 mm
1 x	Liston ABS H 1,5x1,5x330 mm
2 x	Resistencia 3W 5% OR82
2 x	Resistencia 3W 5% OR47
1 x	Prolongador silicona 25 cm (Graupner)
1 x	Prolongador silicona 25 cm (Futaba)
4 x	Listón de CAOBA 3,0x3,0x1000 mm
2 x	Liston de BALSA Borde ataque 8 x 10 x 1000 mm
1 x	Plancha contrachapado Abedul 600x300x2,0 mm
1 x	Plancha de limoncillo 600x300x2.0 mm
1 x	GPS Logger Dymond
1 x	Varilla acero Ø 1,2 mm x 1500 mm
1 x	Liston de BALSA 2,0x10,0x1000 mm
2 x	Listón de NOGAL 3,0x3,0x1000 mm
2 x	Listón de NOGAL 2,0x2,0x1000 mm
1 x	Listón de PINO 2,0x2,0x1000 mm
1 x	Plancha contrachapado Abedul 600x300x1,5 mm
2 x	Listón de PINO 3,0x7,0x1000 mm
2 x	Listón de PINO 5,0x5,0x1000 mm
2 x	Listón de HAYA redondo 10 mm x 1000 mm
2 x	Listón OBECHI 2,0x3,0x1000 mm
2 x	Listón de CAOBA 2,0x2,0x1000 mm
3 x	Listón de TILO 2,0x2,0x1000 mm
1 x	Plancha contrachapado Abedul 600x300x3,0 mm
2 x	Plancha de balsa 1,0x100x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Varilla Aluminio Ø 4,0 mm x 3000 mm
1 x	Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x	Varilla acero Ø 5,5 mm x 1000 mm
2 x	Bujía motor OS nº 8
1 x	Bujía ROSSI R8
1 x	Bujía DLE CM6
1 x	Bujía Saito 400
1 x	Bujía 1/4-32 EVO 10GX
1 x	Bujia OS G5 gasolina
1 x	Encendido GLOW 5C + accesorios
1 x	Autoarranque DLE55, EME55/60, DLA56, SE 55
1 x	Encendido RCEXL A-02
1 x	Destornillador allen 2,0x50 mm molibdeno
1 x	Varilla carbono plana 1000x6.0x0.8 mm
1 x	Disipadores de calor para LEDs Optotronix
1 x	Soporte antivibración encendido V2 Rojo
1 x	Bujía motor OS nº 3
1 x	Bujía NGK CM6
1 x	Bujía motor OS Tipo F
1 x	Bujía Champion RCJ-7Y para ZG
1 x	Termo-retráctil negro tubo de 12,7 mm 2:1
1 x	Termo-retráctil negro tubo de 6,4x1000 mm 2:1
1 x	AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs)
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 20m
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 5 m
1 x	Termo-retráctil negro tubo de 1,2x1000 mm 2:1
1 x	Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Destornillador allen 3,0x60 mm molibdeno
1 x	Termo-retráctil negro tubo de 4,8x1000 mm 2:1
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Accesorios SCHARNHORST
1 x	HBC 10035-3 32-Bit
2 x	Plancha contrachapado Abedul 600x300x4,0 mm
1 x	Plancha contrachapado ABEDUL 600 x 300 x 2,0 mm
1 x	Plancha contrachapado Abedul 600x300x4,0 mm
1 x	Listón de BALSA 2,0x2,0x1000 mm
1 x	Plancha de balsa 10x100x1000 mm
1 x	Plancha contrachapado Abedul 600x300x0,8 mm
1 x	Plancha de balsa 5,0x100x1000 mm

4,846.31EUR