Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Brazo servo MKS Doble Metal L:2.5/3 inc
26.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	Beech dowels 2.0 x 1000 mm
2 x	BALSA triangular 15x15x1000 mm
2 x	Balsa panel 3.0x100x1000 mm
2 x	BALSA trip 4.0x4.0x1000 mm
1 x	Balsa panel 5.0x100x1000 mm
4 x	Beech dowels 3.0 x 1000 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
2 x	BALSA triangular 10x10x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	Balsa panel 2.0x100x1000 mm
2 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Beech dowels 4.0 x 1000 mm
2 x	BALSA trip 3.0x3.0x1000 mm
2 x	BALSA trip 5.0x5.0x1000 mm
1 x	A/C quality beech plywood 600x300x1.5 mm
2 x	Birch plywood plate 600x300x3.0 mm
2 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Birch plywood plate 600x300x4.0 mm
2 x	BALSA trip 10x10x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
2 x	BALSA trip 8.0x8.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
2 x	Motor A2212/13T
1 x	Pine wood slat 5.0x5.0x1000 mm
2 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
2 x	BALSA triangular 8x8x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
2 x	Silent-blocks DLE 170M
1 x	Motor DLE 430 cc - Paramotors
2 x	Small Crow DLE-170M
2 x	Motor DLE 200cc Std
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
2 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x	ABS "T" angle 2.0x2.0x1000 mm
2 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
2 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
2 x	Profile ABS half cane 2.0x1000 mm
1 x	Brass control horn M4 short for wire (10pcs)
1 x	20 mm carbon horn
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
3 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Horn 5/10 with M2 Bearing
3 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Small aluminium horn gold (2pcs)
1 x	Horn with ball 55x40
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Horn 5/20 with M2 Bearing
2 x	Horn 6/35 with M3 Bearing
1 x	Horn 5/15 with M2 Bearing
1 x	6 mm red aluminium threaded horn with patella
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Ballast 700gr OPALE
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Blue aluminium double servo arm HITEC 2,5 inch M3
1 x	Servo MKS HV6130
1 x	Red aluminium servo arm V2-Futaba 17 mm iM2
1 x	Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm
1 x	DIVA cabin cruiser
1 x	Servo HITEC HS-5087 MH
1 x	T- Fittings blue color (2pcs)
1 x	PS-050 TONEGAWA Servo
1 x	Horns set HS-65HB/MG, 5065MG
2 x	Fuel Fittings-Gold
1 x	Hitec 52 mm servo arm
2 x	DLE 55 carburetor
2 x	Check valve quick hose connector 4-4 mm
1 x	Servo HITEC HS-485 HB
2 x	T-Hose connector 4-4-4mm
2 x	Servo case HS-225MG/225BB/5245MG
2 x	Conector FESTO G1/8 Quick 4mm 90º
2 x	1000 ccm gasoline fuel tank
1 x	MIG 29 3D RTF, Servo
1 x	SSPS105 Super Hi-Power servo
2 x	SAITO FG-36 carburetor
1 x	Fast attachment for servos (25 pcs)
1 x	Futaba 54 mm servo arm with ball link
1 x	Aqua RACE 70 (without motor)
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	54 mm Futaba servo arm tandem with ball link
2 x	EME 55 cc carburetor WALBRO
1 x	Servo HITEC D625 MW
1 x	28 mm turnbuckle
1 x	38 mm fenders (10 pcs)
1 x	Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x	SCHARNHORST Battleship 1:200
1 x	Servo FUTABA S 3072 HV S-Bus
1 x	45 mm flag mast
2 x	57 mm micro-mini servo cover
1 x	40,0 mm hydro-propeller (left hydropropeller)
2 x	25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x	Recessed MPX connector support (6 pcs)
1 x	1/6 Pilot "Tony"
1 x	Foam plastic plates (310x210x2 mm)
1 x	Decorative caps, multicoloured
1 x	Support pump Xicoy X45
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	1/10 Pilot "Jimmy"
1 x	18m Fitting barb
1 x	"Taxi Tank" Fuel Tank
1 x	101x28 mm (4.0") Type jets aluminium core wheel
1 x	Foam plastic plates (310x210x8 mm)
1 x	Junta humo metalica G30 (DLE30/DLE60)
1 x	Servo GO-1053 MG 20.0kg
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
2 x	Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Spring Clip Ø25 mm
1 x	Recess mount-rem. glow plug set
1 x	Spring clamp for tube Ø50 mm
2 x	DLE 30 complete electronic ignition
1 x	Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x	Distanzstück motor OS 120 AX
1 x	USB programador GO servos
2 x	3,9 mm ZG20-ZG38 servo arm
1 x	Balsa panel 4.0x100x1000 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Cable control set
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Horn with ball 40x30
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Big Crow DLE-170M
1 x	Motor DLE 200cc Premium Muffler
1 x	DISCUS 2A De Luxe 3.750 mm (Topmodel)
1 x	ASK 21 6.5m + pylona
1 x	ASH 31 6.08m Composite Hollow Molded
1 x	LO 100 ARC 3.3m
1 x	ASW 15 5000 mm (Airwold)
1 x	DG-303 ACRO 3750 mm (Airworld)
1 x	Fox MDM 1 6000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	6 mm M3 variable inclined horn
1 x	Indoor hinge with servo arm integraded
1 x	Micro control horn (2 pcs)
1 x	Horn DUBRO 1/2A
1 x	Long adjustable control horn 3x34
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Horn mando long (2 pcs)
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Small control horn with bearing (2 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Servo HITEC HS-785 HB
1 x	Fuel tank 1500ml (50oz)
1 x	Gear set HITEC HS-65 HB
1 x	Quick hose connector 4-3 mm
1 x	Support 45% Hopper JetsMunt
1 x	La Capitania di Venetia 1:50
1 x	Propeller RABOESCH M4 55 mm (5 Blades) (Left hydropropeller)
1 x	Spinner INO 57 mm Chrome (Imitacion metal)
1 x	Servo DITEX TD2612S
1 x	Quick hose connector 6-6 mm
1 x	FESTO connector M5 Quick 4 mm
2 x	Servo HITEC HS-645 MG
1 x	Servo HITEC HS-5685MH
1 x	Gear set HITEC HS-311/322/325BB
1 x	Servo HITEC HS-7975 TG
1 x	Hose clips 6 mm
1 x	500 ccm gasoline fuel tank
2 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Reed valve for DA 50-R
1 x	Gear set HITEC HS-7950TH
1 x	Servo HITEC HS-7245MH
1 x	DA 85 / DA 100 / DA 100 L carburetor
1 x	Servo HITEC HS-70 MG
2 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Fuel Fittings-Red
1 x	FESTO connector M7 barb fitting 4mm
1 x	Set Micro-horns HS-60/81/85
1 x	Extension Arm for Carburetor (red)
1 x	Servo HITEC HS-635HB Carbonite
1 x	Suction funnel for carburetor WALBRO 20-80cc (red)
1 x	Servo HITEC HS-5625 MG Digi
1 x	Suction funnel for carburetor 90D-M (red)
2 x	Gear carbonite set HITEC HS-6965
2 x	Servo HITEC HS-77 BB Low Profile
1 x	Fuel tank 500ml (17oz)
1 x	Servo HITEC HSB-9370TH
1 x	FESTO connector M7 barb fitting XL Tygon
1 x	Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x	1000 ccm complete gasoline fuel tank
1 x	FESTO connector M5 Quick 6 mm
1 x	1000 cc gasoline fuel tank complet
1 x	Extra hard 250 ccm complete gasoline fuel tank
1 x	280 cc gasoline fuel tank complet
1 x	Quick hose connector 4-4 mm
2 x	Suncover 100cc Red
1 x	Screws set for Hitec MG arms servo
1 x	T- Fittings red color (2pcs)
1 x	Quick hose connector 6-4 mm
1 x	Gear set HITEC HS-125MG/5125MG
1 x	Servo HITEC HS-65 HB
1 x	Servo HITEC HS-5805 MG Digi
1 x	Extra hard 1500 ccm complete gasoline fuel tank
1 x	Servo HITEC HSB-9360TH
1 x	Gear set HITEC HS-56 HB
1 x	500 ccm complete gasoline fuel tank
1 x	Deposito combustible tipo "turbina" 330 ml
1 x	Walbro carburetor for MVVS 26/30/35/40 cc
2 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Gear set HITEC HS-55
1 x	Servo HITEC HS-85 MG
1 x	Servo HITEC HS-81
1 x	Electric Fuel Pump 12v
1 x	Servo DITEX EL0510M
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Servo inverter
1 x	HITEC DPC-11 programmer
1 x	Servo inverter
1 x	Professional Servo tester
1 x	Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller)
1 x	Spinner INO 70 mm Chrome (Imitacion metal)
1 x	Tirpiz Battleship 1:200
1 x	Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller)
1 x	Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x	Spinner INOVA 102 mm Black
1 x	Propeller RABOESCH M4 60 mm (5 Blades) (Right hydropropeller)
1 x	Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller)
1 x	Spinner Alumin. propeller pleg. 30 mm / 5,0 mm
1 x	Spinner 104x131 mm 115 g CFK-BS
1 x	Spinner Alumin. propeller pleg. 30 mm / 4,0 mm
1 x	Spinner INOVA 63 mm White
1 x	Propeller AERO-NAUT M4 73 mm (7 Blades pr) (Right hydropropeller
1 x	Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x	Propeller RABOESCH M5 60 mm (4 Blades) (Left hydropropeller)
1 x	63 mm INO spinner (carbon imitation)
1 x	F3A carbon 75 mm spinner for Hacker C-50
1 x	Spinner INO 82 mm Chrome (Imitacion metal)
1 x	Spinner INO 63 mm Chrome (Imitacion metal)
1 x	Propeller RABOESCH M4 50 mm (3 Blades pr) (Right hydropropeller)
1 x	Propeller AERO-NAUT M5 0 mm (4 Blades) (Left hydropropeller)
1 x	Aluminum Fold Prop Spinner 40 mm / 5mm
1 x	Propeller Ms 65R (rigth propeller)
1 x	Aluminum Fold Prop Spinner 50 mm / 6mm
1 x	VITAPROP CARBON FOLDING PROP 15x9.5"
1 x	58 mm micro servo cover
1 x	13 mm wing servo holder
1 x	11 mm wing servo holder
1 x	65 mm mini servo cover
1 x	Electromotor starter EME 35cc
1 x	DLE Ignition unit
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Dumper propeller 6/8 mm
1 x	GM Propellers Folding propeller Scale 20x13 Carbon 1 pair
1 x	Starter EM Gear Power 80
1 x	RCEXL Electronic ignition twin CM-6
1 x	GLOW 5C + accesories
1 x	Aluminium ignition bad (red)
1 x	RCEXL Electronic ignition twin A-02
1 x	O-ring Saito FG-73 5cyl
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	15x7 tree blades propeller LEFT
1 x	12x6 tree blades propeller
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Turbina X132 H "Light Version"
1 x	Propeller POWER-PROP 13x9 Izda
1 x	Propeller POWER-PROP 10x7
1 x	Propeller electric carbon 8.5x5
1 x	Propeller POWER-PROP 11x9
1 x	Propeller electric carbon 10.5x6
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Propeller electric carbon 10x7
1 x	Propeller POWER-PROP 12x9
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Turbina X45 H "compact"
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Propeller electric carbon 8.5x7
1 x	Propeller POWER-PROP 10x6
1 x	Propeller POWER-PROP 14x12
1 x	Fueraborda RETRO
1 x	Propeller POWER-PROP 14x10
1 x	UHU Por 50ml/40g
1 x	Pegamento Pu R 50g polyuretano
1 x	UHU hart 35 g
1 x	Servo HITEC HS-53
1 x	Servo HITEC D645 MW
1 x	Servo HITEC HS-7115 TH
1 x	Gear set HITEC HS-81
1 x	Hopper 125 ml INTAIRCO
1 x	Servo HITEC HS-5084 MG
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Partall paste 650 g
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Brass control horn M3 short for wire (2 pcs)

38,133.88EUR