1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Ferrita con funda
1 x Ferrita 27x14x7 mm
1 x Ferrita 14x8x5.5 mm
1 x Ferrita 17x10x6.5 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
2 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Straightened threaded rod M2-1m
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
2 x Brass rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
2 x Brass hexagonal rod Ø 3 mm x 1000 mm
4 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
2 x Nylon hinge 20x15x0,3 (10 pcs)
3 x Long pinned hinge (12 uds)
1 x 18 mm reinforced hinge
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x 25 mm reinforced hinge
2 x Nylon hinge 15x0,3 (10 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
3 x Large flex hinge (12 uds)
1 x BALSA trip 10x10x1000 mm
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x POWERBOX Magic Jeti Switch
1 x Extension for SensorSwitch 60cm
1 x PowerBox iGyro SRS
1 x POWERBOX Magic Jeti Switch Royal SRS, Champion SRS
2 x Propeller POWER-PROP 7x7
1 x USB Adaptor OPTronics
1 x Support pumb/filter Xicoy X45
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Soporte filtro FESTO (4 pcs)
1 x Electric Fuel Pump 12v
1 x Y Cable
1 x Straightened rod Ø 1.0 mm x 1000 mm
3 x ROBART POINT HINGE 4,7mm (5 pcs)
2 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Round flex hinge (12 uds)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Jeti Box mini
1 x Aluminun wheel collar 5 mm Ø (4 uds)
2 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Flap hinge 33x9 mm (6 pcs)
1 x Flap hinge (6 pcs)
1 x Gates hinge black 30x16 mm (2 pcs)
3 x Gates hinge
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Hacker X-Pro USB interface V2
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x 15 mm reinforced hinge
1 x Landing gear axle 4x21 4 mm (2 uds)
2 x Indoor hinge with servo arm integraded
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Wheel collar 3 mm Ø (4 uds)
1 x Pin hinge 26x11 mm (10 uds)
2 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Landing gear axle Ø 8 mm (2 uds)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Oracover Yellow CUB 2 m
1 x Oracover GREY Seafire Sea 2m
1 x Monokote ROJO misil (1.8x0.65m)
1 x Oracover Black 10 m
1 x Oracover Orange 2 m
1 x Oratex Red Fokker 10 m
1 x Albatros red/white (Top Model)
1 x FOX 3000 mm, Fuselage (FMS)
1 x IKURA 4.0 m
1 x ALBATROS 3.0 m (orange/white)
1 x BIG MOSNTER
1 x Flip ARF (Top Model)
1 x Oracover Yellow CADMIO 10 m
1 x Oracover Azul 2 m
1 x Monokote BLANCO jet (1.8x0.65m)
1 x Papel japones 12 grs/m2 760x510 mm JAPICO
1 x ORACOVER transparent Yellow (10 m)
1 x Mudguard wheels 112/127 mm
1 x DUPLEX 2.4EX Central Box 220
1 x Aero-Master (Aero-naut)
1 x Avia spare blue cockpit (Top Model)
1 x Gyro 3-Ejes REFLEX V2 FMS
1 x GPS Sensor + Logger OPTronics
1 x Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x FOD Screen K140G/K180G/K210G
1 x DPS Switch JR/JR
1 x Ø 38 mm fiberglass motor-holder for electric motors
1 x Gear for D 54
1 x RCEXL Electronic ignition twin A-02
1 x DLE 30 complete electronic ignition
1 x Compact on-board starting system (9715)
1 x Turbina X132 H "Light Version"
1 x Turbina X45 H "Light Version"
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Landing gear Rocket 400
1 x PARTENAVIA 2020 mm ARF with Flaps
1 x Gates hinge aluminium (1 pcs)
2 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Medium pin type hinge (12 uds)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Ø 40 mm fiberglass motor-holder for electric motors
1 x Wheel collar 4 mm Ø (4 uds)
1 x Jeti Advance Plus Program Card
1 x Small pinned hinge (12 uds)
1 x Wheel collar 5 mm Ø (4 uds)
1 x Recess mount-rem. glow plug set
1 x Mudguard for 140/165 mm wheels
1 x Katana Mini carbon wheel pants (2 pcs)
1 x Sandwich carbon + poplar 3mm + carbon 290x160 mm
13,843.51EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies