Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

22x12 Falcon electric
105.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
2 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Buy Perforated film 145 cm / 50 m
2 x	Motor A2212/13T
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Aluminium sheet 500x250x0,5mm
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Buy Perforated film 100 cm / 50 m
2 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	ABS 500 x 400 x 1,5 mm (white)
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
2 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Horn DUBRO 1/2A
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Horn 13,5x16 mm (2 pcs)
2 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Horn mando small (2 pcs)
1 x	ABS tube 8.0x7.0x1000 mm
2 x	5 mm M2 variable inclined horn
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	6 mm M3 variable horn
1 x	Horn DU-BRO 1/2 (2 pcs)
2 x	5 mm M2 variable horn
2 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
2 x	Brass control horn M2 short for wire (2 pcs)
1 x	ABS tube 16.0x14.0x1000 mm
2 x	Brass control horn M2 large for wire (2pcs)
3 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
2 x	ABS tube 18.0x16.0x1000 mm
2 x	Control horn long w/ball
1 x	ABS tube 8.0x6.0x1000 mm
2 x	ABS tube 9.0x8.0x1000 mm
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Horn 6/35 with M3 Bearing
1 x	Horn 6/20 with M3 Bearing
2 x	Horn 5/10 with M2 Bearing
2 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
2 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x
1 x	Hovercraft sailcloth
2 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Extension silicon 30 cm female (Graupner)
4 x	200 mm extensión servo HITEC/JR
1 x	Extension lead 15 cm Multiplex
1 x	Premium servo extension 100cm
3 x	Cabel "Y" 15 cm
2 x	Cable S.BUS 3 salidas 100 mm
1 x	Circlick securite
1 x	Extension silicon 100 cm (Graupner)
2 x	Extension silicon 10 cm (Futaba)
3 x	Extension silicon 50 cm (Graupner)
2 x	Extension silicon 75 cm (Futaba)
1 x	Extension 7.5 cm
2 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Extension 90 cm (Futaba)
2 x	Extension 100 cm (Futaba)
2 x	Cabel "Y" 30 cm (graupner)
2 x	Extension 15 cm (Futaba)
2 x	Futaba Female 40 cm extension
1 x	Extension silicon 100 cm (Futaba)
3 x	Extension 30 cm (Futaba)
1 x	Extension silicon 35 cm male (Futaba)
2 x	Cabel "Y" 30 cm (Futaba)
2 x	Extension silicon 50 cm (Futaba)
2 x	Cable S.BUS 3 salidas 300 mm
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	41x5,5 mm wires output (2 pcs)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	PVC grid straight 290x185x0.32 mm
2 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Blade holder center GFK 0,5 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Nut M1,6
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Head lower part New
1 x	Head spacer
1 x	Fiberglass plate 350x150x1.5 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
2 x	Side rudder
1 x	Sheet Depron Aero 1250x800x3 mm
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Fiberglass plate 350x150x2.5 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
2 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Fiberglass 5000x1100 mm 49 g/m²
2 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Colormatic 2K Soft fine putty white, 1 kg
1 x	Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x	Cable with accesories
1 x	Glass fibre sleeve Ø 20 mm X 20m
1 x	6 mm red aluminium threaded horn with patella
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
2 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
2 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
2 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Micro control horn (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Horns indoor
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
2 x	4Wx2 Power Navigation Light, 13mm, T-Fuse White
1 x	Premium servo extension 25cm
1 x	Servo NARO Max Std
1 x	Extension silicon 30 cm male (Graupner)
1 x	Extension silicon 35 cm (Futaba)
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Extension silicon 30 cm male (Futaba)
2 x	Cable silicona macho batt. receptor 30 cm (Graupner)
3 x	Washer 2.2×4
2 x	Wheel keeper washer
1 x	LA500 tail empennage
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Raer wall
2 x	8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 50m
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m
1 x	Fiberglass plate 1200x1000x0,2 mm
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 20 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
1 x	Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain)
1 x	Glass fabric 25 g (2 m²)
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Motor wall
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Servo Fork
1 x	Foam plastic plates (310x210x8 mm)
1 x	Head upper part
1 x	Carbon Non-Woven, 245 g/m² 125 cm x 20 m
1 x	Tail support (2 pcs)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Foam plastic plates (310x210x5 mm)
1 x	Steel Screw M1x8 (10 pcs)
1 x	EDGE 540-A 91" (2310 mm)
1 x	Sukhoi 29S 2,2 m V2 CLASSIC BLUE (SebART)
1 x	EXTRA 300 78" V3 Yellow/Red/Blue
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	6 mm ball link M3 (10 pcs)
1 x	8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x	Propeller POWER-PROP 15x8
1 x	Propeller POWER-PROP 14x10
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Futaba 2x20 mm servo double arm
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	FUTABA 20 mm servo arm with ball link
1 x	3x8W Triple-Spotlight, 12mm, T-Fuse White
1 x	Lense for Spotlights, 20mm
1 x	16mm Gear-Spotlight, 4W
1 x	Propeller electric carbon 9.5x6
1 x	Propeller POWER-PROP 11x8
1 x	Propeller POWER-PROP 11x6
1 x	Propeller electric carbon 6.5x4
1 x	Propeller POWER-PROP 13x9
1 x	Dumper propeller 6/8 mm
1 x	Propeller POWER-PROP 10x7
1 x	Porpeller HUNTER 480
1 x	Propeller electric carbon 9.5x7
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Extension PVC 150 cm (Graupner)
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Premium servo extension 50cm

13,663.93EUR