Top » Catalog » Hardware » Power supply system/Data Recordi » Emcotec » EMCA15055

149.95EUR

DPSI Ampere & Voltage bundle
[EMCA15055]

DPSI Ampere & Voltage bundle

Product description
DPSI Ampere - Produktbeschreibung
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere & Voltage bundle can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models.
System stability of the DPSI Ampere & Voltage bundle is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery.
The DPSI Ampere & Voltage bundle is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.
The DPSI Ampere & Voltage bundle can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.
The DPSI Ampere & Voltage bundle is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere & Voltage bundle.
Function overview
Loss-free switching function without diodes.
Integrated electronically fail-proof switches separately for each battery without using the micro controller (CSHC).
Dual safeguarded power off logic. Even a failing part does not lead to a power out.
IVM (Intelligent Voltage Monitoring). Battery voltage monitoring with acoustic warning signals for all supported battery types (NiMH, LiIon, LiPo, LiFePO4).
Booster for safe control of the power switches even at extremely low voltages or short power interruptions (MBOOST).
DPSI Voltage - Product description
Voltage regulator module for battery backer DPSI Ampere.
The module must be plugged to the output side of the DPSI Ampere. With a jumper regulated output voltages of 6 volts, 6.6 volts or 7.2 volts can be selected. Furthermore the unregulated battery voltage can be used additionally on a secound output.
Delivery includes dual power supply DPSI Ampere, voltage regulator DPSI Voltage, programming jumper, switching magnet with EMCOTEC patch as well as German and English operating instructions.

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX case for Jeti DS handheld transmitter
54.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Flat washer 4.3 mm (20 pcs)
2 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
2 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
2 x	Quicklock washer 2 mm (10 pcs)
1 x	Flat washer 3.2 mm (20 pcs)
2 x	Quicklock washer 4 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	Red smoke canister 140 g
2 x	resin-hardener package L-385 with hardener H-385 (875 g)
2 x	resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x	Remote electric ignition system
3 x	White smoke bombs AX-18 (5 pcs)
1 x	Hardener Aero EPH 161 (250 g)
1 x	Blue smoke canister 100 g
2 x	Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x	B4-0 rocket charges (6 pcs)
1 x	Epoxy Resin L (2.5 Kg)
3 x	Mixers smoke bombs AX-60 (5 pcs)
2 x	Yellow smoke canister 100 g
1 x	Red smoke canister 65 g
2 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Green smoke canister 100 g
1 x	3l Smoke oil
1 x	AX-60 starters (5 pcs)
2 x	Ventral support for AX-18/AX-60
1 x	resin-hardener L-385 H-385 (625 g)
1 x	Ferrita con funda
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
2 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Oracover CHROME 2m
1 x	Oracover Red 2 m
1 x	Ply-Span 450x600/13g Orange
1 x	Oracover Green10 m
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Oracover Verde 2 m
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Oracover Brown 2 m
1 x	ORACOVER Ferrari red (2 m)
1 x	Oratex Red Fokker 10 m
1 x	Monokote PLATINO metalizado (1.8x0.65m)
2 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Oratex Natural White 2m
1 x	MYLAR film A350 (1000x500 mm)
1 x	Oracover Yellow CUB 10 m
1 x	Oratex White 2m
1 x	Oracover Black 2 m
1 x	Oracover ROYAL RED 2m
1 x	Ply-Span 450x600/13g Blue
1 x	Oracover White 2 m
1 x	Oratex Antik 2m
1 x	Ply-Span 450x600/13g Yellow
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	Round Rod 4,0x1000 mm
1 x	Lock nut M5 (10 pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Anodized aluminium servo M3x16 screw (4 red pcs)
1 x	Propeller diller for DLE111 and DA85-150
1 x	PowerBox Battery 4000
1 x	Blind nut M8 (10 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Alu-Cross for Backmount of A60-V2-Backmountmotors
2 x	Blind nut M6 (4 pcs)
1 x	PowerBox MAG Sensor
1 x	PowerBox iGyro SRS
2 x	Blind nut M5 (10 pcs)
1 x	Propeller diller for DA50, DLE55 red
1 x	PowerBox MERCURY SR2
1 x	Threaded insert M4 (4 pcs)
1 x	Blind nut M4 (4 pcs)
2 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Nut for mounting M4 (4 pcs)
1 x	Hexagonal Nut M1 (10 pcs)
1 x	Screw M2.5x10 (10 pcs)
1 x	Socket Screw M3x9 mm
1 x	Support pump Xicoy X45
1 x	Tapping Screw M2.9x13 (10 pcs)
1 x	280 cc gasoline fuel tank complet
1 x	DPSI Ampere & Voltage bundle
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Pitts Muffler kit for CAP 21
1 x	Support conector MPX (6 pcs)
1 x	Spring Clip Ø25 mm
1 x	FESTO connector 1/8 Quick 6mm 90º
1 x	Giant Scale Muffler D.A. 70
1 x	1000 ccm gasoline fuel tank
1 x	KAVAN Hand crank fuel pump
1 x	FESTO connector M5 Quick 4 mm
1 x	Yellow smoke canister 65 g
1 x	Initior Transmitter FTX2 Wireless
2 x	resin-hardener L-385 H-385 (1250 g)
1 x	Hardener Aero EPH 161 (500 g)
2 x	Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x	Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x	resin-hardener package L-385 with hardener H-385
1 x	Suction funnel for carburetor 90D-M (red)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	Oracover Black 10 m
1 x	Oracover GREY Seafire Sea 2m
1 x	Red smoke canister 100 g
1 x	White gelcoat 1 Kg
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Carbon plate 350x150x2.5 mm
2 x	Carbon plate 550x350x2.5 mm ECOTECH
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	Fiberglass plate 620x540x1,0 mm
1 x	PVC transparent battery termo-retract 85 mm (1 m)
1 x	Ply-Span 450x600/13g Black
1 x	Foam plastic plates (310x210x8 mm)
1 x	Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x	Carbon plate 1000x500x2,0 mm ECOTECH
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	PVC red battery termo-retract 68 mm (10 m)
1 x	Teflon rollers 80 mm x 15 mm Diam.
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	Carbon plate 350x150x2.0 mm
1 x	Fiberglass plate 620x540x3,2 mm
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Screws flush mount M2
1 x	Nut M1,6
1 x	Nut M2 securing
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	PSC 5
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
2 x	PVC transparent battery termo-retract 51 mm (1 m)
2 x	3,2x1000 mm 2:1 red termoretract tube
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	Carbon plate 350x150x1.0 mm
1 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon plate 350x150x4.0 mm
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Release film 100 cm x 50 m
1 x	PVC blue transparent battery termo-retract 68 mm (10 m)
1 x	Carbon plate 700x550x0.5 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Fiberglass plate 350x150x1.5 mm
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
2 x	PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x	PVC yellow transparent battery termo-retract 69 mm (10 m)
2 x	Fiberglass plate 350x150x0.3 mm
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
2 x	2,4x1000 mm 2:1 red termoretract tube
1 x	Carbon plate 350x150x1.5 mm
1 x	Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x	Carbon plate 550x350x1.5 mm ECOTECH
1 x	Styrene plate 320x120x1.0 mm
1 x	PVC termo-retract battery 45 mm transparent orange (1 m)
1 x	Fiberglass plate 350x150x0.5 mm
1 x	PVC yellow battery termo-retract 69 mm (10 m)
1 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x	Y Cable
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Titanium M3x0,5x12 mm Flat Head screw (4 pcs)
1 x	Screw M3x16 (10 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	DEMON CORTEXpro
1 x	bavarianDEMON USB cable
1 x	Blind nut M2 (10 pcs)
1 x	Nut for mounting M5 (4 pcs)
1 x	Lock nut M5 (20 pcs)
1 x	Hose connector stopper 4 mm
1 x	Mini neumatic retract landing gear
1 x	PowerBox Sensor V3 MPX/Jr
1 x	Refueling Cap V3 Black
1 x	Fuel Dot (RED)
1 x	FESTO Blanking plug G1/8
1 x	DPSI magnetic switch actuator (PCB)
1 x	Fuel line plugs (Blue)
1 x	Optotronix X-Carrier
1 x	Fuel line plug Large 2 pcs
1 x	FESTO connector M7 barb fitting XL Tygon

9,119.61EUR