Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

P-47 Thunderbird Deco 03
3,990.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Z-shaped servo mount
2 x	Servo arm with 6 mm hole to FEMA 9800A
2 x	L-shaped servo mount
3 x	1/10 Pilot "Jack"
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
3 x	Metal gear set for HS81MG/5082MG
2 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
2 x	Piloto Jet "Green" 1/6 Scale
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Pilot "Anthony" (Slimline)
2 x	1/6 Pilot "Buddy"
3 x	Servo DL3017 Digi 17Kg-0.15s/60º
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
3 x	Pilot JAN 1/4 Saiplanes
2 x	1/7 Pilot "Japanese"
1 x	1/6 Pilot "Garry"
2 x	Piloto JET 1:3,5
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
2 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	1/6 Pilot "Tony"
1 x	Piloto Jet "Red" 1/6 Scale
2 x	1/6 Pilot "John"
2 x	Fast attachment for servos (25 pcs)
1 x	1/12 Pilot "Cougar"
1 x	Servos security connector (2 pcs)
1 x	Servo arms set 40/50/55/5055 MG
4 x	1/12 Pilot "Langley"
2 x	Pilot "Duke" Legends Series (Slimline)
3 x	Horns set HS-65HB/MG, 5065MG
2 x	Civilian pilot "G-Man" size 9cm (Slimline)
2 x	1/4 Pilot "Mike"
1 x	Pilot "Goose" (Slimline)
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
2 x	Metal gear set for HS85MG/5085MG
2 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
2 x	25 mm carbon servo arm
1 x	Foil for sticking flaps and ailerons
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
3 x	3,9 mm ZG20-ZG38 servo arm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	SE Ring 330 mm (4 pcs)
1 x	Tape GFK 38 mm
1 x	SE Ring 200 mm (2 pcs)
1 x	20x1000 mm Ring Strap Back To Back
2 x	Cinta Goldfix 1m
1 x	Joint with bearing M3 22x5,5
3 x	M3 Maxi ball link (2 uds)
2 x	M3 Maxi ball link (2 uds)
2 x	Ball link M3 RPA's-UAV's
1 x	6 mm ball link M3 (10 pcs)
2 x	M3 Maxi ball link (2 uds)
4 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	Ball link M3 (6 uds)
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
2 x	Short ball link M3 (6 uds)
2 x	Long ball link M2 (6 uds)
2 x	Joint with bearing M2,5 22x5,5
1 x	Socket head ball link M3 (2 uds)
1 x	Joint with bearing M2 22x5,5
1 x	Socket head long ball link M3 (6 uds)
1 x	Socket head long ball link M3 (2 uds)
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	Blue metalic ball link M3/3 azul (2 pcs)
2 x	Ball link M3 (10 pcs)
1 x	6 mm hexagonal ball link M3 (10 pcs)
2 x	Round Rod 5,0x1000 mm
2 x	Horn for flap control (1 pcs)
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Strip 2,5x1,25x330 mm
4 x	Cable with accesories
2 x	Round Rod 4,0x1000 mm
2 x	Round Rod 2,0x1000 mm
3 x	ABS I Strip 10x5x1000 mm
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Horn DUBRO 1/2A
2 x	Strip ABS 2.0x3.0x1000 mm
2 x	ABS I Strip 20x10x1000 mm
2 x	20 mm carbon horn
2 x	Adjustable brass horn threaded M3
3 x	Strip ABS 2.0x8.0x1000 mm
2 x	Round Rod 6,0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Horn 20x28,5 mm (2 pcs)
2 x	Strip ABS 2.0x10.0x1000 mm
1 x	Strip 1,5x1,5x330 mm
2 x	Control horn long w/ball
2 x	Horn with ball 40x30
1 x	Horn 13,5x16 mm (2 pcs)
3 x	Brass control horn M2 long for wire (10pcs)
1 x	Horn 16,5x20 mm (2 pcs)
3 x	6 mm red aluminium threaded horn with patella
2 x	ABS Strip 1.0x5.0x1000 mm
2 x	Brass control horn M4 short for wire (4 pcs)
2 x	Round Rod 2,5x1000 mm
3 x	ABS Strip 1.0x4.0x1000 mm
2 x	Horn 5/20 with M2 Bearing
3 x	Round Rod 1,25x1000 mm
2 x	Horn 5/15 with M2 Bearing
3 x	Brass control horn M4 short for wire (10pcs)
2 x	ABS Strip 1.5x8.0x1000 mm
2 x	ABS Strip 1.5x6.0x1000 mm
2 x	6 mm M3 variable inclined horn
3 x	ABS Strip 1.0x3.0x1000 mm
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Conector Servo female 4 pines
1 x	Futaba 38 mm servo arm with ball link
1 x	Futaba 17 mm servo arm with ball link HITEC
1 x	Servo arms set HS-65HB/MG/5065MG
1 x	1/10 Pilot "Jimmy"
1 x	Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
2 x	Support pump Xicoy X45
1 x	Support pumb/filter Xicoy X45
1 x	Support Flush MPX Conector (6 pcs)
1 x	Piloto jet 130 mm
1 x	1/4 Pilot "Heidi"
2 x	1/12 Pilot "Fighter"
1 x	1/12 Pilot "Tom"
1 x	Socket head ball link M3 (2 uds)
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	Servo holder for retract
1 x	SE Ring 250 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 240 mm (2 pcs)
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	20x200 mm battery rings
1 x	SE Ring 400 mm (2 pcs)
2 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	M3/5Diam metal ball link V3 (2 pcs)
2 x	M2,5 Diam metal ball link V3 (2 pcs)
2 x	Short ball link M2 (6 uds)
1 x	Ball link M1.6 (6 uds)
2 x	Carbon plate 350x150x3.0 mm
3 x	Ball link M2,5 (10 pcs)
2 x	M2,5 5Diam black ball link V2 (2 pcs)
2 x	6 mm M3 variable horn
1 x	LH long black aluminium horn L31xH30 (2pcs)
2 x	6 mm blue aluminium threaded horn with patella
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x	ABS Strip 1.5x2.0x1000 mm
1 x	7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
1 x	Extra long horn 60x30
1 x	Small aluminium horn blue (2pcs)
1 x	Servo BLS-M55B 61.2kg
1 x	Soporte grifo FESTO (2 pcs)
1 x	Support Pitot JETI
2 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Servo BLUE Bird BLS-H71B v2
1 x	Support XT60 conector (2 pcs)
2 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Carbon servo arms for HITEC HS 65 (4 pcs)
1 x	MIG 29 3D RTF, Servo
1 x	Spinner Alumin. fixed propeller 30 mm / 3,0 mm
1 x	Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x	ULTIMATUM 2.0 m green/black
1 x	ULTIMATUM 2.0 m white
1 x	Alu-Cross for Backmount of A60-V2-Backmountmotors
2 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	M3/5 Diam metal short ball link V3 (2 pcs)
1 x	Esc MasterBasic 90 Opto
1 x	A50 Motor Mount Alu complete set
1 x	Esc MasterBasic 70SB
1 x	Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm
1 x	Axle for motor A30-XL V2
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
2 x	Small adjustable control horn with bearing
1 x	Long ball link M1.6 (6 uds)
1 x	Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
2 x	Long adjustable aluminium control horn 2,8x24
1 x	Small control horn with bearing (2 pcs)
1 x	Rudder forward 70x28 "type Kato"
2 x	Rudder forward 80x28 "type Kato"
2 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Long horn 50x26
2 x	Strip 3,5x1,75x330 mm
2 x	Long extra-strong control horn with bearing 2,8x34
1 x	CAM-Carbon Light Prop 10x4.5" (Prop right)
1 x	CAM-Carbon Light Prop 14x6" (Prop right)
1 x	Prop CAM-Carb-Light 8x4,5"
1 x	Aero-Master (Aero-naut)
1 x	CAM-Carbon Light Prop 12x5" (Prop right)
1 x	CAM-Carbon Light Prop 12x6"
1 x	CAM-Carbon Light Prop 9x5" PHANTOM (Prop left)
1 x	CAM-Carbon Light Prop 10x5" (Prop left)
1 x	Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x	Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm
1 x	Cable control set
1 x	Round Rod 1,5x1000 mm
1 x	Horn 5/10 with M2 Bearing
1 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	Round Rod 3,0x1000 mm
1 x	Short extra-strong control horn with bearing 2,8x15
1 x	6 mm aluminium horn with patella
1 x	5 mm M2 variable horn
1 x	CAM-Carbon Light Prop 14x6" (Prop left)
1 x	Support Filtro FESTO
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	Long adjustable aluminium control horn with bearing 2,8x15
1 x	Horn 6/20 with M3 Bearing
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Rudder forward 90x28 "type Kato"
1 x	5 mm M2 variable inclined horn
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Horns indoor
1 x	Servos wing assembly set HS 80/81/82/85
1 x	Round Rod 1,0x1000 mm
1 x	CAM-Carbon Light Prop 10x5" (Prop right))
1 x	CAM-Carbon Light Prop 10x6"
1 x	CAM-Carbon Light Prop 10x5" (Prop left)
1 x	CAM-Carbon Light Prop 11x6"
1 x	CAM-Carbon Light Prop 13x5" Q500 (Prop left)
1 x	CAM-Carbon Light Prop 9x6"
1 x	1,6x1000 mm 2:1 black termoretract tube

10,766.79EUR