Top » Catalog » Hardware » Transmitters/Receivers » Receivers » PowerBox CORE » POWER8240

109.00EUR

Receiver CORE PBR-26D 26ch
[POWER8240]

Features

26 Channel 2.4GHz Receiver
Two independent redundant receiver circuits
Extreme interference rejection
Ultra-long range
No servo outputs; intended as receiver unit for PowerBox or FBL systems
Option of iGyro SAT
Integral telemetry / servo bus (P²BUS)
High-performance real-time telemetry
Reception quality and airborne battery voltage available via telemetry as standard
Auxiliary output can be configured as serial interface (S.BUS or SRXL)
Parameters for all functions can be set from the transmitter

Technical Data

Operating voltage 4.0V - 9.0V
Supported RC systems CORE
Channels 26
Servo sockets 26
Servo signal resolution 4096 Steps
Integral gyro system optional with iGyro SAT
Dimensions 48 x 25 x 10 mm
Weight 10g
Temperature range -30°C to +85°C

under request

Reviews

Customers who bought this product also purchased

DLE 55-RA Muffler

under request

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
    Receivers->
      Acc/ Telemetria Jeti
      Compatible
      FUTABA
      Graupner
      Hacker
      Hitec
      Jeti
      Mikado
      Multiplex
      PowerBox CORE
      RadioLink
      RCM Pelikan
      Schulze->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Emisora Spektrum NX10 10ch (solo Tx)
619.92EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	M3/5 Diam metal short ball link V3 (2 pcs)
1 x	6 mm ball link M3 (10 pcs)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	Ball link M3 (6 uds)
1 x	Ball link M3 (10 pcs, flat ball)
1 x	Ball link M2 (10 pcs)
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	Long ball link M3 (6 uds)
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
2 x	Joint with bearing M3 22x5,5
1 x	M3 Maxi ball link (2 uds)
1 x	Ball link M3 (10 pcs)
1 x	Ball link M2,5 (10 pcs)
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	M3/5Diam metal ball link V3 (2 pcs)
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	Long ball link M1.6 (6 uds)
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
3 x	1/12 Pilot "Tom"
1 x	1/6 Pilot "Garry"
1 x	Pilot "Anthony" (Slimline)
2 x	1/6 Pilot "Buddy"
2 x	Pilot "Dick" Legends Series (Slimline)
1 x	1/10 Pilot "Jack"
2 x	Civilian pilot "Joe" size 9cm (Slimline)
2 x	1/10 Pilot "Jimmy"
2 x	1/6 Pilot "Tony"
2 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Extinguisher CO2 - 2 Kg
2 x	Bungee HLG Premium
2 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
2 x	Profile ABS half cane 3x1000 mm
2 x	Profile ABS Square 3 x 1000 mm
3 x	ABS angle 5,0x5,0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
2 x	Profile ABS Square 4 x 1000 mm
2 x	ABS angle 6,0x6,0x1000 mm
2 x	L-Connector 1.0 mm x 1000 mm
3 x	ABS angle 1.5x1.5x1000 mm
2 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
2 x	Rubber profile 10-2 mm 2M
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Profile ABS half cane 5.0x1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
2 x	ABS rectangular profile 10x5.0x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	Xplorer4 anemometro
1 x	Xplorer3 anemometro
1 x	38x4,5 mm wires output (2 pcs)
1 x	Cable coupler M2 (10 uds)
2 x	3,2 mm Prop Adapter M5
1 x	2 mm Prop Adapter M5
1 x	Frontal Adapter for AXI53xx
1 x	Support Filtro FESTO
1 x	Support conector MPX (6 pcs)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Support FUEL DOT V3
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Xplorer2 anemometro
1 x	DLE Ignition 111/120/170
1 x	L ELBOW DA-120 long (2 pcs)
2 x	Piloto RC Civil 1/5- 1/6 Scale 12"
2 x	Pilot JAN 1/4 Saiplanes
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
2 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
2 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x	Adapter 3,0 mm M6
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	3 mm Short Prop Adapter M5
2 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Adapter 4,0 mm M6
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	PVC transparent battery termo-retract 70 mm (10 m)
1 x	Ply-Span 450x600/13g Red
1 x	Stainless Steel Bend D 12x0,4mm
1 x	Rocket cardboard tube 25mm x 24mm x 230mm
1 x	Muffler ZG 20
1 x	Piston ring EME 35cc
1 x	Carburator Moki S400
1 x	Motor EME 35 cc with electric starter
2 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Cylinder gasket per 1 for ZG 74B/ZG 80B
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Moki Exhaust Bend 200 mm
1 x	Carburator gasket MOKI
1 x	One Way bearing for EME35 starkit with key
1 x	Motor Moki S 250 cc 5 cyl with autostarter
1 x	Rear cover O-ring 26/30 cc
1 x	Moki Pushrod S250 (1 pcs)
1 x	Silencer with rear exhaust MTW TDH 110
1 x	Stainless steel silencer for DA 150/150L
1 x	Ignition unit for DA-70/100/120/150/170/200
1 x	DLE 85 Ignition unit
1 x	Muffler DLE 20
1 x	Carburetor DLE 170M
1 x	Piston pin for DA50R/DA100
1 x	Piston ring for DA-60 and DA-120
1 x	Canister combo DLE 120 cc
1 x	T-Motor U7-V2.0 Kv420
1 x	Motor XPOWER F2919/10 F5J Light
1 x	PVC transparent battery termo-retract 51 mm (1 m)
1 x	Size "L" motor holder for class 600
1 x	Ø 40 mm fiberglass motor-holder for electric motors
1 x	PIT (Aero-Naut)
1 x	ULTIMATUM 2.0 m green/black
1 x	ULTIMATUM 2.0 m yellow/blue
1 x	XPower XC5030/14 LS
1 x	PH5 adapter for 5mm M8 axi for AXI2820 y 2826
1 x	5 mm Prop Adapter M8
1 x	5 mm Prop Adapter M6
1 x
1 x	6 mm Prop Adapter M8
1 x	Metalic motor holder for class 550-600
1 x	PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x	Crystal Universal RX 35.120 Ch 72
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
1 x	Nut for mounting M4 (4 pcs)
1 x	Pin to cable coupler M1,6 ⌀ (6 pcs)
1 x	Opto Gas Engine Kill Switch
1 x	3,9 mm ZG20-ZG38 servo arm
1 x	26x12 prop Super Silence
1 x	50cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x	22x10 prop Super Silence
1 x	3-blades 30x12 carbon prop Super Silence
1 x	TWIST planeador gomas
1 x	Bird (Aero-naut)
1 x	ULTIMATUM 2.0 PRO "Full Carbon Red"
1 x	PPS-4D Propeller
1 x	Spinner propeller pleg. 30 mm / 3,2 mm
1 x	PC-6 Pilatus Porter Big "Tiger" (PICHLER)
1 x	SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models)
1 x	Pilot "Goose" (Slimline)
2 x	Spinner white 30 mm
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Motor holder for AC 28/7
1 x	White large kwik link (10 pcs)
1 x	Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Profile ABS half cane 7.0x1000 mm
1 x	Pendulun "luxe" to tank
1 x	Carburetor menbrane for ZG 45SL/ ZG62/S/SL motor
1 x	EXHAUST STACK Ø 25 mm DLE 55, ZDZ 50-100B2, 3W60/120B2, ...
1 x	Piston ring for motor 58/116 cc
1 x	Gasket for motor DA 50
1 x	Metalic joint for DA-150 cilinder/elbow
1 x	Rear bearing for motor 35/40 cc
1 x	Propeller diller for DA50, DLE55 red
1 x	Head Gasket 30cc (3 pcs)
1 x	1000 ccm gasoline fuel tank
1 x

25,549.11EUR