1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Clip fixing for wing (2 pcs)
2 x Cable grommet Ø 4 mm (4 uds)
1 x 100 mm rods set for direction control
1 x 45 mm rods + T patellas set for direction control
1 x Allen wheel collar M3x5
1 x 140 mm rods set for direction control
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Clip mini fixing for wing (2 pcs)
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Allen wheel collar M3x3
1 x 45 mm rods set for direction control
1 x Cable grommet Ø 5 mm (4 uds)
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x 100 mm rods + T patellas set for direction control
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Allen wheel collar M4x4
1 x 41x5,5 mm wires output (2 pcs)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x 250 mm / 16 mm Airbrakes
1 x Cockpit aluminium closing
1 x Canopy Latch
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x 38x4,5 mm wires output (2 pcs)
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x Long ball link M2 (6 uds)
2 x Ball link M3 (10 pcs)
1 x M3 Maxi ball link (2 uds)
1 x Long ball link M3 (6 uds)
1 x Socket head ball link M3 (2 uds)
1 x M2,5 5Diam metal ball link V3 (2 pcs)
1 x Short ball link M2 (6 uds)
2 x M2,5 Diam metal ball link V3 (2 pcs)
1 x M2,5 5Diam black ball link V2 (2 pcs)
1 x Long ball link M1.6 (6 uds)
1 x Socket head long ball link M3 (6 uds)
1 x M3 Maxi ball link (2 uds)
1 x M3 Maxi ball link (2 uds)
1 x Ball link M3 (6 uds)
1 x Ball link M2,5 (10 pcs)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x Joint with bearing M2 22x5,5
1 x Ball link M2 (10 pcs)
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x M3 INDUSTRIAL ball link (2 uds)
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x Socket head long ball link M3 (2 uds)
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Profile ABS Square 2 x 1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x ABS angle 2,0x2,0x1000 mm
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x Adjustable launching hook
1 x Towing hook <3m
1 x SERVO HOLDER
1 x LOWER TOW HOOK
1 x Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x Snap long M2 (10 uds)
1 x SE Ring 450 mm (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x Oratex White 2m
1 x Squared carbon wing joinner 5x5x220 mm
1 x Ferrita 17x10x6.5 mm
1 x Electric rocket starters (6 pcs)
1 x Black silicone 0,25 mm² wire (25 m)
1 x ABS Strip 1.5x2.0x1000 mm
1 x Cable Cargador FUTABA
1 x Cable set Premium™ MAXI "one4two"
2 x Cut tube
1 x Extension lead 15 cm Multiplex
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Short ball link M1.6 (6 uds)
2 x Blind nut M5 (4 pcs)
1 x 3 mm Short Prop Adapter M5
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Aluminium wide washer M4 Gold (4 pcs)
2 x 5 mm Prop Adapter M6
1 x Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x Anodized aluminium servo M3x16 screw (4 red pcs)
1 x Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
2 x Blind nut M6 (4 pcs)
2 x Blind nut M2 (10 pcs)
1 x Ply-Span 450x600/13g Yellow
1 x Ply-Span 450x600/13g Orange
1 x Oratex Red Fokker 10 m
2 x Ply-Span 450x600/13g Black
1 x PVC transparent battery termo-retract 195 mm (1 m)
1 x Oracover Yellow CUB 10 m
1 x PVC transparent red battery termo-retract 68 mm (10 m)
1 x Light System
1 x Para-RC Mix
1 x Tool for entel
1 x Para-RC Trike "RC-Bullix"
1 x MAX pilot ARTF
1 x Oratex Yellow Cub 10 m
1 x Solarfilm Lite blue transp. 5m
1 x ABS angle 1.5x1.5x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x ABS Strip 1.0x4.0x1000 mm
1 x Oracover light Grey 2m
1 x Oratex Antik 2m
1 x 165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x PVC transparent black termo-retract battery 185 mm (1 m)
1 x Threaded insert M4 (4 pcs)
1 x Treaded hexagonal socket insert M3 Br (4 pcs)
1 x Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x Ballast 700gr OPALE
1 x Digital precision scale up to 2000 g
1 x Screwdriver for Hexagon 1,27mm
1 x Starter 12v (Max 90 and 15ccm)
1 x Starter EM Gear Power 250
1 x Pump hose (Ø 6/8 mm) transparent
1 x silverlot 45% - 1,50x500 mm solder rods (2 pcs)
1 x Screw M4x30 (10 pcs)
1 x Tapping Screw M2.2x65 (10 pcs)
1 x Socket Head Screw M2x8
1 x 15 mm floating pad (30 pcs)
1 x Floating M3 washer pad (36 pcs)
1 x Socket Head Screw M2x5
1 x Profile ABS half cane 3x1000 mm
1 x Connectors MPX male
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x ABS rectangular profile 12x6.0x1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x ABS tube 3.0x1.0x1000 mm
2 x 2,3 mm Prop Adapter M5
2 x 5 mm Prop Adapter M8
1 x Flat washer 2.2 mm (20 pcs)
1 x Papel japones 12 grs/m2 760x510 mm JAPICO
1 x Ply-Span 450x600/13g White
1 x Oracover GREY Seafire Sea 2m
1 x Oracover Red 2 m
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Quicklock washer 1 mm (10 pcs)
1 x 135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Nut for mounting M2 (4 pcs)
1 x Oracover Brown 2 m
1 x Pan head screw M2x16 PH
1 x 37 mm PVC transparent battery termo-retract (1 m)
1 x Hexagonal Nut M2.5 (10 pcs)
1 x Oratex Silver 2m
1 x Lock washer 3.2 mm (20 pcs)
1 x Lock nut M6 (10 pcs)
1 x Oracover Black 10 m
1 x Lock washer 2.7 mm (20 pcs)
1 x Foam plastic plates (310x210x5 mm)
1 x Nut for mounting M5 (4 pcs)
1 x Flat washer 2.7 mm (20 uds)pcs)
1 x Socket Screw M3x9 mm
1 x Hexagonal Nut M4 (20 pcs)
1 x Hexagonal Nut M2 (10 pcs)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x 2,5x60 mm allen screwdriver
1 x Paramotor BackPack XXS (without accessories)
1 x Hot Glue Stick GREEN
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Vacuum pump 12 CFM
1 x Copier 5x20 cm pcs
1 x Dust collector for mould cleaning
1 x Screwdriver for Torx® TX6
1 x Opale Rucksack
1 x Vacuum pump P1-N
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x 1,5x50 mm allen screwdriver
1 x Digital scale up to 40 kg
1 x Z Bender - S Type Tool
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Smart Soldering Iron 110W/230V AC
1 x Tachometer Hyperion Multi-pala
1 x Tachometer HANGAR 9 digital
1 x Welder 100W/200V
1 x 25 mm Sandpaper file
1 x Fabric scissors curved (offset handles), 16 cm / 6" length
1 x 
1 x Actuador lineal HLS12-100210-7.4v
1 x ABS tube 2.0x1.0x1000 mm
1 x Tapping Screw M2.2x13 (10 pcs)
1 x Screw M3x20 (10 pcs)
1 x Aluminium M2x12 mm screw (4 pcs)
1 x Tapping Screw M2.9x13 (10 pcs)
1 x Spring pin Ø 2 x 6 mm (10 pcs)
1 x Screw M4x12 (10 pcs)
1 x Nut for mounting M4 (4 pcs)
5,624.72EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies