Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo GO-1006MG (0.052s/60º, 3.0Kg)
52.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

5 x	Glases Innovation Plus
3 x	Glases Flitemaster
4 x	Glases Nimbus "Black"
3 x	Glases Nimbus
4 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
3 x	Glases Stratus
3 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
3 x	Glases Aspen
2 x	Glases Moritz
1 x	Extinguisher CO2 - 2 Kg
2 x	CC 03
3 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	5 LiPo XH>EH adapter
3 x	Glases Ace
2 x	USB HLS prog. interface
3 x	Cabel charger transmitter GRAUPNER
3 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x	Circlick securite
2 x	TrainerCord (master-learner)
2 x	Red copper lacquer wire Ø0,2 mm (5 m)
2 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
2 x	CC 05
2 x	3 LiPo XH>EH adapter
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	JETImodel SINGLE BEC
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	MPX-Dean "T" Adapter
1 x	30 cm BEC cable (female)
2 x	CC 02
1 x	2 LiPo XH>EH adapter
2 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Dean "T" - Futaba Adapter
1 x	CM-3
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	XH female balance (2S) connector (2 pcs)
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	Connectors banna oro 2 mm (M/F)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Connectors DEANS 4 pins (1 pair)
1 x	Gold antispark 4 mm plug
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	MPX Sub-D Adaptor
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Conector BEC female (10 pcs)
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	XH male balance (2S) connector (2 pcs)
1 x	XH female balance (4S) connector (2 pcs)
1 x	XH female balance (3S) connector (2 pcs)
1 x	Round Rod 6,0x1000 mm
1 x	Dust collector for mould cleaning
1 x	Spray EC Red 400ml
1 x	Joint with bearing M3 22x5,5
3 x	USB interface ALTIS
2 x	30 cm BEC cable (male)
2 x	TP/TopFuel - XH 2/3S Adapter
2 x	Connector CAN 15
1 x	Connector Sub-D 2+5 Male
2 x	SPS 70V 140/280 A
2 x	Opto Gas Engine Kill Switch
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
2 x	Multi-adapter balancer JST - TP
2 x	Extension 6 lipos XH > EH
1 x	Interruptor SPS 70v 60/120A
2 x	Interruptor RX/Batterie
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	resin-hardener L-385 H-385 (5000 g)
1 x	Hardener Aero EPH 161 (500 g)
1 x	White gelcoat 1 Kg
1 x	resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x	resin-hardener package L-385 with hardener H-385 (875 g)
1 x
1 x	GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
2 x	resin-hardener package L-385 with hardener H-385
1 x	Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
1 x	Glass Bubbles (0.12g) 400 G (aproxx 3.3 l)
1 x	Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
2 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x	Epoxy Resin L (2.5 Kg)
1 x	Thixotropic agent TM 100, tin/ 75 g (approx. 1 l)
1 x	BEC 3A FOXY
1 x	Jet Afterburner Simulator NF-Jet1RY Set
1 x	NF-3XL set
1 x	Jet Afterburner Simulator NF-Jet2
1 x	Jet Afterburner Simulator NF-Jet3 RY
1 x	NF-3m Heli Kit
1 x	Lense for Spotlights, 20mm
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Paramotor BackPack XXS (without accessories)
1 x	Parachute BACKUP X100
1 x	8Wx2 Navigation & Strobe, 11mm Green/White
1 x	NF-3 RC set
1 x	MPX Support
1 x	XT-60 connector (female)
1 x	XH LiPo extension lead
1 x	Magnetic Interruptor MULTIPLEX
2 x	Male Prolonger TP 4/5S
1 x	Extension 2/3 lipos JST - JST/C
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	Male connector for 6 pines AWG
1 x	Connector Sub-D 2+5 Female
1 x	PSC 5
1 x	ESC Ripmax QUANTUM 80A SBEC
1 x	MPS Gas-Cap-Powerswitch
1 x	Switching module high voltage SXH
2 x	MAX BEC 2D plus EX
1 x	SPS 70V 100/200 A
1 x	Servo slow down unit (0,7-14,7 sec )
3 x	SBEC 40
1 x	UBEC 6A KAVAN
1 x	Long Switch On/Off micro
1 x	MAX BEC
1 x	PowerBox SparkSwitch RS
1 x	MAX BEC 2
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Extension 5 lipos JST - JST/C
1 x	FesEx-Uni6 System
1 x	Female connector for 6 pines AWG
1 x	Extension 2/3 lipos JST/C
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Female connector JST SH 1.0mm with 10 cm wire
3 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	XCALIBUR Fuel Tank with built in UAT
2 x	ALPHA 1000mm BL ARTR
1 x	JSM U/C Leg Springs for XCALIBUR (Pr) (6-12Kg)
2 x	Tyres 70 mm Xclaibur (2 pcs)
2 x	QUANTUM II 55 Brushless Motor
1 x	Harness for transmitter JETI DUPLEX
1 x	ESC RAY G2 R-20B BEC
1 x	JETI Counter for DC-16 (Blue)
2 x	Tool for entel
1 x	SIMtransmitter 6 Mode 2
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Support Pitot JETI
1 x	Angle support XT60 conector
1 x	Tube support Ø 6mm (10 pcs)
1 x	Support Filtro FESTO
1 x	Soporte filtro FESTO (4 pcs)
1 x	Support conector MPX (6 pcs)
2 x	Opto Gas Engine Kill Switch
1 x	Extension 5 lipos JST/C - JST
1 x	DPSI magnetic switch actuator (housing)
1 x	SBEC Jeti
1 x	8Wx2 Navigation & Strobe, 11mm Red/White
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Katana Mini carbon wheel pants (2 pcs)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Support Flush MPX Conector (6 pcs)
1 x	Support FUEL DOT V3
1 x	Recessed MPX connector support (6 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Support pump Xicoy X45
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Support ECU Xicoy X-45
1 x	Support XT60 conector (2 pcs)
1 x	Hardener P-25, canister 2.5Kg
1 x	Hardener Aero EPH 161 (250 g)
1 x	resin-hardener L-385 H-385 (625 g)
1 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x	MEKP Harderner 100 g
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x	LED wire (orange - 2pcs)
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Mudguard for 140/165 mm wheels
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	CC 01
1 x	Battery charging cable XT60
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	120x60 mm SLH KOVO wheel
1 x	Extension 5 lipos JST/C
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	700 ml complete glow fuel tank
1 x	ESC RAY G2 R-60SB SBEC
1 x	Program Card G2 RAY

9,410.99EUR