1 x | Trike XL motor set (motor+esc+prop) |
1 x | Parachute PV6 for F3J |
1 x | Parachute BACKUP X100 |
1 x | Paramotor BackPack XXS 2 |
1 x | Windsock Ozone L -1200 mm |
1 x | Paramotor Kit Camo H1.5/ Ben Red |
1 x | Para-RC Mix |
1 x | LUCAS pilot ARTF |
2 x | Paramotor BackPack XXS (without accessories) |
1 x | Windsock Ozone L - 700 mm |
1 x | Parachute P4 |
1 x | Para-RC "RC-Evo-Cross" Rescue |
2 x | Motor 2212 (1000KV) Quadcopter F450 |
2 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
1 x | P 17×5.8 Prop-2PCS/PAIR |
1 x | MAX pilot ARTF |
2 x | Support conector MPX (6 pcs) |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Pine wood slat 1.5x3.0x1000 mm |
3 x | Electric rocket starters (6 pcs) |
1 x | Rubber profile 6-2 mm 2M |
1 x | |
2 x | Tail boom brace LOGO 480 |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Support Pitot JETI |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Canopy Latch |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
3 x | PCARD Wireless System |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
3 x | White smoke canister 100 g |
2 x | Spannlack 1000 ml |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
2 x | 3l Smoke oil |
1 x | 30 mm gas motor standoff |
3 x | White smoke canister 140 g |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | SUS wire 3m (nylon coated) |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | 5 LiPo XH>EH adapter |
4 x | Parachutist |
1 x | Cabin latch Fox MDM1 4m (pair) |
2 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | Ventral support for AX-18/AX-60 |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Spray YELLOW Inca Lexan 150ml |
2 x | Steering arm 12 mm Ø 4 mm |
1 x | Ventus 1:4 set of instruments |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Long ball link M3 (6 uds) |
3 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
3 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | CM-3 |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Round Rod 3,0x1000 mm |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Field folding model stand |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
2 x | Combo 4 pcs AXI 2204 Multicopter |
3 x | T-Motor U7-V2.0 Kv420 |
1 x | AXI 2204 Multicopter |
1 x | ESC ALPHA 60A HV |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
1 x | Transmitter Balancer Futaba T-10CG |
3 x | wire tensioner (blue) |
2 x | 1/10 Pilot "Jimmy" |
1 x | Helices DJI Mavic Air STEALTH "Black" (4x Ud) |
1 x | Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud) |
4 x | White smoke bombs AX-18 (5 pcs) |
3 x | AX-60 starters (5 pcs) |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
2 x | |
1 x | Painting GHT Lexan Black 150 ml |
2 x | USB Mini Camera endoscope |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Balsa panel 2.0x100x1000 mm |
2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Partall paste 650 g |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Support Filtro FESTO |
1 x | Ferrita 14x8x5.5 mm |
1 x | 1/4 Pilot "Heidi" |
1 x | T- Fittings red color (2pcs) |
1 x | Pilot JAN 1/4 Saiplanes |
2 x | Wire easy tensioner (silver) |
1 x | Transmitter Stick Ends V2 Red - M3 (2 pcs) |
1 x | Transmitter Stick Ends V1 Silver - M3 (2 pcs) |
1 x | Piloto JET 1:3,5 |
1 x | T- Fittings blue color (2pcs) |
1 x | Rotor blade 3Bl Scale 1050R |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Adaptadores carga 6s JST-XH |
1 x | Sparkplug ROSSI R8 |
1 x | Sparkplug NGK CM6 |
1 x | Sparkplug 1/4-32 Glow |
1 x | Spark motor OS nº 8 |
1 x | Sparkplug Champion RCJ-7Y for ZG |
3 x | AX-60 starters (5 pcs) |
1 x | Rocket D9-7 |
1 x | Rocket D3-P |
3 x | Mixers smoke bombs AX-60 (5 pcs) |
3 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | SWTU2 switch |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Support ECU Xicoy X-45 |
1 x | UBEC 6A KAVAN |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Universal Colour Paste deep black 50 g |
1 x | Fiberglass plate 350x150x4.0 mm |
3 x | Red smoke canister 65 g |
3 x | White smoke bombs AX-9 (10 pcs) |
2 x | Socket Head Screw M2x8 |
2 x | Threaded insert M3 (4 pcs) |
2 x | Landing gear clamp for Ø 4 mm (4 uds) |
3 x | Green smoke canister 140 g |
2 x | Threaded insert M4 (4 pcs) |
2 x | Nylon threaded block M4 (2 uds) |
2 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Glass fibre sleeve Ø 20 mm |
2 x | Sheet Depron Aero 1250x800x3 mm |
2 x | Glases Innovation Plus |
2 x | Chopped glass fibre strands 3 mm |
2 x | Festo 4mm Tubing Holder (10 uds) |
2 x | Socket Head Screw M2x10 |
2 x | Fail Safe air retract |
1 x | Glases Stratus |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Nylon gear block Ø 5 mm (2 uds) |
2 x | Smoke set "S" |
1 x | wire tensioner (red) |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | MPX-Dean "T" Adapter |
1 x | Short Switch On/Off micro |
1 x | Piloto jet 130 mm |
2 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Switc electronic 30 Amp |
1 x | Hobbylite Filler, Balsa colour |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | 1/6 Pilot "Cindy" |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Ferrita con funda |
1 x | SPS Remote switch actuator |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Red smoke canister 100 g |
1 x | Angled clevis with threaded rod M3 |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Landing gear strap medium (4 uds) |
1 x | Faucet FESTO |
1 x | Chopped glass fibre strands 3 mm |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Servo M2x7/16 screw (4 pcs) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Aero shocks |
1 x | "M" set |
1 x | 800TVL CMOS camera for FPV |
2 x | Initior Receiver FRX2 Wireless |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Landing gear strap large (4 uds) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Dual Sequencer Gear and Canopy |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Air pressure gauge |
1 x | Nylon gear block Ø 6 mm (2 uds) |
1 x | Socket Screw M2x3 mm (4 pcs) |
1 x | Styrene plate 320x120x0.5 mm |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Glases Moritz |
1 x | "S" set for planes |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
2 x | Wing tips support for AX-18/AX-60 (2 pcs) |
2 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Wire easy tensioner (red) |
1 x | Red smoke canister 140 g |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Socket Head Screw M2,5x12 |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
2 x | White smoke bombs AX-3 (10 pcs) |
2 x | Wing bolts M6 Steel screw Blue (2 pcs) |
2 x | Remote electric ignition system |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
2 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Socket Head Screw M2x12 |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Green smoke canister 100 g |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Threaded insert M6 (10 pcs) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | White smoke canister 65 g |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
1 x | Nylon gear block Ø 3 mm (2 uds) |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
1 x | Servo M2x9/16 screw (4 pcs) |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Threaded insert M5 (10 pcs) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Glases Aspen |
1 x | Smoke set "Glider" |
1 x | 40 mm air cylinder |
1 x | "S" set for boats |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | Nylon gear block Ø 4 mm (2 uds) |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Body for landing gear Ø 3 mm |
1 x | Glases Flitemaster |
1 x | Socket Head Screw M2x5 |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Quick hose connector 3-3 mm |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Film release agent PVA 25 ml |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Quick hose connector 4-4 mm |
1 x | Blue smoke canister 100 g |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
2 x | Glass fabric 25 g (2 m²) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | Landing gear strap small (4 uds) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | Parachute expulsion foam |
1 x | Nylon threaded block M6 (2 uds) |
1 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | wire tensioner (silver) |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
2 x | Blue smoke canister 140 g |
1 x | Yellow smoke canister 100 g |
1 x | Festo Adaptor Tygon Large/4mm |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Glases Nimbus "Black" |
1 x | Glases Ace |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | PVC grid straight 290x185x0.32 mm |
1 x | 20x1000 mm Ring Strap Back To Back |
|
12,310.92EUR |