1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x DLE 30 complete electronic ignition
1 x Compact on-board starting system (9713)
1 x Propeller POWER-PROP 7x7
1 x KAVAN Hand crank fuel pump
1 x Electric Fuel pump
1 x PowerBox Smokepump JETs 2x outside
1 x Electric rocket starters (6 pcs)
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x 1/10 Pilot "Jack"
1 x Piloto Jet "Green" 1/6 Scale
1 x 70 mm INO spinner (carbon imitation)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Spinner plastic red fixed propeller 30 mm
1 x Connectors banna oro 6,0 mm (M/F)
1 x Spinner INOVA 63 mm White
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Green smoke canister 100 g
1 x Para-RC Trike "RC-Bullix"
1 x Windsock Ozone L - 700 mm
1 x Paramotor BackPack XXS (without accessories)
1 x Conector MT-60 (pair)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x 45 mm black plastic spinner for fixed propeller
1 x 6 mm red aluminium threaded horn with patella
1 x Spinner INO 75 mm Chrome (Imitacion metal)
1 x XH female balance (5S) connector (2 pcs)
1 x Wing connector 8pin with pin strip, plug & socket
1 x Beech dowels 4.0 x 1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Spinner plastic black fixed propeller 30 mm
1 x 1/12 Pilot "Langley"
1 x Connectors banna oro 3,5 mm (M/F)
1 x 20 mm carbon horn
1 x Screwdriver for Hexagon 1,5mm
1 x 1,5x50 mm allen screwdriver
1 x 1/12 Pilot "Tom"
1 x White smoke bombs AX-3 (10 pcs)
1 x White smoke bombs AX-9 (10 pcs)
1 x Actuador lineal HLS12-100210-7.4v
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Starter EM Gear Power 250
1 x Tape GFK 50 mm
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Cut tube
1 x Spinner INOVA 45 mm White
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Spinner Alumin. fixed propeller 45 mm / 3,2 mm
1 x Horn 5/10 with M2 Bearing
1 x 38 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Blue smoke canister 100 g
1 x Compact on-board starting system (9512)
1 x Selfstarr EME35
1 x Tygon DUBRO Medium 15m
1 x SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
1 x Shaft sleeve LAMA
1 x Swashplate metal LAMA
1 x Motor mount VANQUIST 48" F3A
1 x Nose OPTIMA 2.200 mm (Elec or Glider)
1 x V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x Motor mount EDGE 540 48"
1 x Metalic nose for PROJETI
1 x Simple take for fuel tank
1 x Motor mount class 48"
1 x Compact on-board starting system (9525)
1 x Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x Electromotor starter EME 35cc
1 x GLOW 2C + accesories
1 x Compact on-board starting system (9715)
1 x Aluminium ignition bad (red)
1 x RCEXL Electronic ignition twin A-02
1 x Opto Gas Engine Kill Switch
1 x Aluminium ignition bad (blue)
1 x Extra hard 750 ccm complete gasoline fuel tank
1 x DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS
1 x Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas
1 x Sparkplug NGK CM6
1 x Sparkplug 1/4-32 EVO 10GX
1 x Sparkplug 1/4-32
1 x Spark motor OS nº 3
1 x A/C quality beech plywood 600x300x0.6 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x Battery bed V2_S (black)
1 x Sparkplug DLE CM6
1 x Sparkplug 1/4-32 Glow
1 x Balsa panel 4.0x100x1000 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x Lite Plywood panel 600x300x2.0 mm
1 x Balsa panel 1.5x100x1000 mm
2 x PROXXON - SAW BLADE 8MM 0ZI220E
2 x Roller cutter 28 mm
1 x Sandpaper file 13 mm
1 x Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x Birch plywood plate 600x300x2.0 mm
1 x Balsa panel 8.0x100x1000 mm
1 x Balsa panel 2.0x100x1000 mm
1 x Stickers-digit for marking
1 x Legs + electric brakes for Viper Jet 90
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
3,456.06EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies