59.00EUR

Glases Innovation Plus
[CMINNOVATIONP]



Set de gafas, cristales, funda y trapo
Do you have to wear prescription glasses? Fed up with seeing your buddies turn up at the field with great looking and practical glasses you just can't wear? We have the answer in the form of these stylish prescription model flying sunglasses, which have been especially developed for radio control model use.

At the heart of the design is a polycarbonate frame that houses your prescription lenses; this clips onto a main frame, which in turn houses the coloured shades that simply clip on to a hinged section. These hinges allow you to temporarily turn up the outer lenses in order to closely inspect a model in the pits etc.

Innovation Plus are polarised sunglasses. The polarised cristals greatly reduce glare, which is an effect caused by light hitting horizontally flat surfaces. Polarised lenses filter out this light to greatly enhance your visibility.

The de-centred, scratch resistant lenses have been optically balanced to negate the effects their curvature would otherwise have on your vision. Conforming to US ANSI Z80.3 plus British and European safety standard EN1836, our sunglasses are factory impact-tested, and offer great protection against flying debris should you suffer a mishap. All of our glasses carry the CE (European Union standard) compliance mark. The interchangeable lenses are: yellow (category 1) low light - these actually enhance light and contrast; beige (category 2) average sunlight; smoked mirror (category 3) bright sunlight; dark smoked (category 4), very bright conditions.

The glasses come with the interchangeable lenses, a cleaning cloth and a superb carry case with belt clip. All frames and the carry case display our 'Model Glasses' logo.

WILL THEY WORK FOR ME? - If you have a prescription (SPH) requirement that's less than plus or minus 4.00, our glasses will work just fine for you. Stronger prescriptions can cause distortion, due to the curvature of the tinted lenses when placed in front of the flat prescription clip. The de-centring calibration loses its effect where stronger prescriptions are required. If you have a requirement greater than plus or minus 4, please do not buy these glasses. Bi-focals, varifocals and prismatic lenses can be added - if in doubt, please consult your optician for advice.

IMPORTANT NOTE
When wearing Innovation Plus, some users may find they cannot see certain types of LCD or other electronic / digital transmitter displays. This is a normal cause of wearing polarised glasses. We recommend using the glasses with the front section flipped up, or the glasses removed, when model trimming prior to use.


few units
few units

Reviews

Customers who bought this product also purchased
Fiberglass plate 350x150x0.5 mm
Fiberglass plate 350x150x0.5 mm

few units
few units

Tape GFK 50 mm
Tape GFK 50 mm

few units
few units

Tape GFK 25 mm
Tape GFK 25 mm

few units
few units

MAX BEC
MAX BEC

few units
few units

Conector FUTABA Servo female BLUE silicon (10 pcs)
Conector FUTABA Servo female BLUE silicon (10 pcs)

few units
few units

Connectors DEANS (T)
Connectors DEANS (T)

few units
few units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Servo NARO Max Std
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
3 x 
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Round Rod 1,25x1000 mm
1 x HBC 10035-3 32-Bit
1 x Release wax 250ml
1 x Towing hook <3m
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Horn 6/27 with M3 Bearing
1 x 6 mm ball link M3 (10 pcs)
1 x Small aluminium horn blue (2pcs)
1 x M3 Maxi ball link (2 uds)
1 x Motor 2212 (1000KV) Quadcopter F450
1 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x ESC ALPHA 60A HV
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Steering arm 16 mm Ø 4 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x 30 cm BEC cable (female)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x SUS wire 3m (nylon coated)
1 x Aro pasacable Ø25 mm (4 pcs)
1 x PVC 0,08 qmm Graupner servos wire (5 m)
1 x Ferrita 17x10x6.5 mm
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x BALSA trip 6.0x6.0x1000 mm
1 x Spray EC Red 400ml
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x ABS tube 18.0x16.0x1000 mm
1 x Angle of incidence meter
1 x Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x Round Rod 2,0x1000 mm
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x ABS Strip 1.5x2.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Horn 5/15 with M2 Bearing
1 x Long ball link M1.6 (6 uds)
1 x Joint with bearing M2 22x5,5
1 x LOWER TOW HOOK
1 x Strip ABS 2.0x5.0x1000 mm
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x ABS Strip 1.0x2.0x1000 mm
1 x 
1 x Joint with bearing M2,5 22x5,5
1 x Towing hook
1 x Spare Part Frame Set for EACHINE RACER 250
1 x AXI 2204 Multicopter
1 x T-Motor U7-V2.0 Kv420
1 x CC 05
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Green silicone 0,25 qmm wire (50 m)
1 x Cable Cargador FUTABA
1 x Support Antena 2.4 Ghz (2 pcs)
1 x 200m servo "Premium" wire (white/red/blue)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x BALSA triangular 15x15x1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Adapter lead MPX/XT60
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x ABS tube 9.0x7.0x1000 mm
1 x Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x SERVO HOLDER
1 x M3 Maxi ball link (2 uds)
1 x ABS Strip 1.0x5.0x1000 mm
1 x M3 INDUSTRIAL ball link (2 uds)
1 x M2,5 5Diam metal ball link V3 (2 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x Horn 16,5x20 mm (2 pcs)
1 x USBCOM 5i
1 x Strip ABS 2.0x10.0x1000 mm
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x Short ball link M2 (6 uds)
1 x Horn with ball 55x40
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x RH long aluminium horn (2pcs)
1 x CA Glue (medium) 20g
1 x Round Rod 3,0x1000 mm
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
2 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Round Rod 1,0x1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Ball link M2,5 (10 pcs)
1 x Strip 3,5x1,75x330 mm
1 x Horn 20x28,5 mm (2 pcs)
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x 1804 2400KV Brushless Motor Qav 250 mini
1 x Combo 4 pcs AXI 2204 Multicopter
1 x F450/550 Quadcopter, landing gear
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x Adapter lead MPX/EC3
1 x Silicone 0,35 qmm servos cable Futaba (5 m)
1 x BALSA trip 2.0x10.0x1000 mm
1 x Cabin latch Fox MDM1 4m (pair)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x 50m servo "Premium" wire (white/red/blue)
1 x Locking cable tie 2.5x100 (uds)
1 x PPM Encoder Module
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Ferrita 27x14x7 mm
1 x Ferrita con funda
1 x Hobbylite Filler, Balsa colour
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Support pump Xicoy X45
1 x Plasti Dip Liquid Tape 429 ml black
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x BALSA trip 3.0x3.0x1000 mm
1 x Support Flush MPX Conector (6 pcs)
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Stickers-digit for marking
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Tapa estado carga XT-60 (6 pcs)
1 x Silicone 0,50 qmm servos wire Graupner(5 m)
1 x Nitroverdu 500 ml
1 x BALSA leading edge 8x10x1000 mm
1 x Support ECU Xicoy X-45
1 x PIX Hawk with accesories
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Locking cable tie 3.2x142 (uds)
1 x 4 LiPo XH>EH adapter
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Extractor piñones 2.3/3.2 mm
1 x Spannlack 1000 ml
1 x Silicone 0,35 qmm servos wire Graupner(100 m)
1 x Partall paste 650 g
1 x Circlick securite
1 x Support XT60 conector (2 pcs)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x BEC 3A FOXY
1 x PVC 0,35 qmm servos wire Graupner (100 m)
1 x Dean "T" - Futaba Adapter
1 x BALSA trip 3.0x5.0x1000 mm
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Locking cable tie 4.6x203 (uds)
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x MPX-Dean "T" Adapter
1 x Cockpit plastic closing
1 x Couple M4 for wire (10 pcs)
1 x Solvent Plasti Dip 1000 ml
1 x Interface Jack Adapter IKARUS
1 x Propeller balancer
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x ABS tube 6.0x4.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x 25 mm reinforced hinge
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Indoor hinge with servo arm integraded
1 x Propeller balancer
5,159.14EUR
Manufacturers
Languages
Español English
Currencies