Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Bucker Bu-133 Jungmeister #69 2540 mm ( CY Model)
1,299.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
2 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Black silicone 0,25 mm² wire (25 m)
2 x	5 line servos wire black (1 m)
2 x	Silicone 0,50 qmm servos wire Graupner(5 m)
1 x	Cable Cargador FUTABA
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	10m servo "Premium" wire (white/red/blue)
3 x	1 m servo "Premium" wire (white/red/blue)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	JR silicone servo wire 0,35 qmm / 5m
2 x	PVC 0,14 qmm servo wire Futaba (5 m)
2 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	White silicone 0,25 qmm wire (150 m)
2 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	White silicone 0,25 mm² wire (25 m)
1 x	200m servo "Premium" wire (white/red/blue)
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	100m servo "Premium" wire (white/red/blue)
2 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
2 x	White silicone 0,25 qmm wire (100 m)
3 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
2 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Nylon hinge 20x20x0,3 (10 pcs)
2 x	Long pinned hinge (6 uds)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	15 mm reinforced hinge
1 x	Nylon hinge for flaps 33x9 (2 pcs)
2 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
3 x	18 mm reinforced hinge
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	800TVL CMOS camera for FPV
3 x	Aluminium wide washer M4 Blue (4 pcs)
2 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
2 x	Lock washer 4.3 mm (20 pcs)
2 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	M3-M4 rubber washer (8 pcs)
2 x	Aluminium wide washer M3 red (4 pcs)
3 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Slave-cable USB Easy Sim
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Interface Jack Adapter IKARUS
1 x	GameCommander USB Universal
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	SIMtransmitter 6 Mode 2
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Joint with bearing M2,5 22x5,5
1 x	Round Rod 2,0x1000 mm
1 x	MPX Sub-D Adaptor
2 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	3l Smoke oil
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
1 x	OLED-Display for PowerBox Mercury SRS
1 x	PowerBox iGyro SRS + GPS Modul
1 x	2 piece mounting frame Battery 3200 / 4000
2 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Extension MPX-MPX 20 cm
1 x	2 piece mounting frame
1 x	Silicone red 4,0 qmm wire ( 1 m)
1 x	Silicone black 0,5 qmm wire ( 1 m)
1 x	50m servo "Premium" wire (white/red/blue)
2 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Indoor hinge with servo arm integraded
1 x	Round flex hinge (12 uds)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
2 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Gates hinge
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Actuator Electric 25 mm HIGH TORQUE
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x	Aluminium M2x12 mm screw (4 pcs)
1 x	M3 black washers (4 pcs)
2 x	Blind nut M4 (10 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	12 mm floating pad (49 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	45 mm rods set for direction control
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Digital scale up to 40 kg
1 x	Vacuum pump 12 CFM
1 x	Starter EM Gear Power 80
2 x	Silicone red 1,0 qmm wire ( 1 m)
1 x	Silicone red 2,5 qmm wire ( 1 m)
1 x	6 mm Quick clamp_S (10 pcs)
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
2 x	10 mm Quick clamp_L (6 pcs)
1 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell
1 x	Fiberglass heat shield Ø 4 mm 1000 mm
1 x	Fiberglass heat shield Ø 6 mm 1000 mm
2 x	Ball Link Plier
1 x	1,5x50 mm allen screwdriver
1 x	Copier 2x20 cm pcs
1 x	3,0x60 mm allen screwdriver
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Digital precision scale up to 2000 g
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x	Protective Cover for wires Ø 20 mm 1000 mm
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Protective Cover for wires Ø 10 mm 1000 mm
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	Protective Cover for wires Ø 15 mm 1000 mm
1 x	Silicone red 0,75 qmm wire ( 1 m)
1 x	Silicone black 0,75 qmm cable ( 1 m)
1 x	Silicone black 1,0 qmm wire ( 1 m)
1 x	GPS Logger Dymond
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	DUPLEX 2.4EX Central Box 320
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	Small pinned hinge (12 uds)
2 x	Charger LiPo Charger4
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Motor Mount for TITAN ZG38/38S/38SC, length 36 mm
1 x	Carburetor for ZG45SL and ZG62/S/SL
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC
1 x	3,9 mm ZG20-ZG38 servo arm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x	Blind nut M6 (4 pcs)
1 x	Hexagonal Nut M2 (10 pcs)
1 x	24x10 prop Super Silence
1 x	Screw M2.5x10 (10 pcs)
1 x	Tapping Screw M2.2x13 (10 pcs)
1 x	FALCON 20X9 CARBON PROPELLER (GAS)
1 x	Propeller MEJLIK 23x8 CFK
1 x	Propeller MASTER 6x4
1 x	Propeller POWER-PROP 11x8
1 x	Split pin 1x8 mm (10 uds)
1 x	80 mm rods set for direction control
1 x	Split pin 1.6x16 mm (10 uds)
1 x	250 mm / 16 mm Airbrakes
1 x	100 mm rods set for direction control
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Small pinned hinge (6 uds)
1 x	Propeller MENZ-S 17x8
1 x	3-blades 27x12 carbon prop Super Silence
1 x	Propeller MENZ-S 18x12
1 x	Propeller MENZ-S 21x10 3-Blades
1 x	28x12 prop Super Silence
1 x	30x14 prop Super Silence
1 x	3-blades 20x10 carbon prop Super Silence
1 x	Propeller MENZ-S 15x6 3 blades
1 x	Propeller MENZ-S 21x10
1 x	Tapping Screw M2.9x9.5 (10 pcs)
1 x	Blind nut M5 (4 pcs)
2 x	Hexagonal Nut M2.5 (10 pcs)
1 x	Threaded insert M4 (4 pcs)
1 x	GLOW 5C + accesories
1 x	Cargador para AA/AAA Ni-MH & Ni-Cd
1 x	Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	12x6 tree blades propeller
1 x	Helice CLASSIC-Prop 20x10
1 x	Propeller POWER-PROP 16x10
1 x	FALCON 27X11 CARBON PROPELLER (GAS)
1 x	FALCON 33X11W CARBON PROPELLER (GAS)
1 x	10x7 tree blades propeller
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Snap pin for micro clevis (10 uds)
1 x	Cockpit metalic closing
2 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
2 x	Propeller diller for DLE170
2 x	Roller cutter 28 mm
2 x	Schul-Malpinsel Gr.5
2 x	Mini-handed clamp
2 x	Propeller diller for DLE111 and DA85-150
2 x	Sub-D Plug Mold
2 x	XT-60 Plug Mold
1 x	Propeller drill jig DA 100/85/120/150/200 and VM 60-210
1 x	Pan head screw M2x16 PH
1 x	Screwdriver for Torx® TX6
1 x	Hot Glue Stick GREEN
1 x	Hot Glue Stick RED
1 x	Screwdriver for Hexagon 1,27mm
1 x	Screwdriver for Torx® TX8
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Silicone red 6,0 qmm wire (25 m)
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Triple rod con. 2mm Pushrod (2 pcs)
1 x	45 mm rods + T patellas set for direction control
1 x	90 mm rods + T patellas set for direction control
1 x	100 mm rods + T patellas set for direction control
1 x	MPX 8 pins plug mold
1 x	Pistola termica MH 550 micro
1 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	Sealing Iron STANDARD
1 x	Propeller diller 5/6,3/8/9
1 x	Heat Seal Iron
1 x	Modelling compound (Plastilin), sculptor's quality 1 Kg
1 x	Laminating brush 10 mm, pack/ 50 pcs
1 x	Tool for entel
1 x	Mold plugs XT-90
1 x	PCI-HV ignition conversion set with Zenoah rubber plug cap for Z

10,404.67EUR