Top » Catalog » Hardware » Servos » Hitec » ROIHS7954SH

109.00EUR

Servo HITEC HS-7954 SH Digital High
[ROIHS7954SH]

The HS-7954SH could be considered the most economical high voltage, high torque, coreless servo on the market. Based on the ultra popular HS-7955TG, the HS-7954SH has the added benefit of our high voltage coreless motor. With 403 inch ounce of torque at 7.4 volts, the HS-7954SH is fast too with a 0.12 second transit time when operating on a 2 cell LiPo pack. The HS-7954SH harnesses all this power by utilizing a heavy duty case that incorporates an aluminum heat sink, hardened steel gears, and two strong steel gear pins nested in brass axial bushings. Put it all together and you get one tough high voltage servo at a price that can't be beat.

Features:
• G2 Digital Circuit
• Steel Gear Train
• Ultra Performance HV Coreless Motor
• Heatsink Case
• Dual Ball Bearing Supported Output Shaft

Programmable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Points
- Fail Safe On/Off
- Fail Safe Point
- Resolution* (default is high resolution)
- Overload Protection* (default is off)
*These features are only programmable with the HFP-20 programmer.

Detailed Specifications:
- Motor Type: Coreless
- Bearing:Dual Ball Bearing
- Speed: 0,15 - 0,12 sec @ 60deg.
- Torque: (6v-7.4v) 333-403 oz/inch; 24-29 kg/cm
- Size: 39,88x19,81x36,83 mm (1,57x0,78x1,45 inch.)
- Weight: 65.20 g (2.30 oz)

temporarily out of stock

Reviews

Customers who bought this product also purchased

JetiBOX temporarily out of stock	Cockpit aluminium closing temporarily out of stock	Conector JR/Uni Servo male BLUE silicon (10 pcs) temporarily out of stock
Blue aluminium servo arm V2-Hitec 1,0 inch M3 temporarily out of stock	Conector JR/Uni Servo female BLUE silicon (10 pcs) temporarily out of stock	Ball link M3 RPA's-UAV's temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PT-22 Ryan Recruit 2290 mm (SEAGULL)
560.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Red aluminium servo arm V3-Futaba 1,0inch
1 x	aluminium servo arm V2-JR 2,0 inch M3
1 x	Red aluminium servo arm V1-Futaba 17 mm M2
1 x	Blue aluminium servo arm V3-Hitec 1,0inch M3
1 x	Blue aluminium servo arm V2-Hitec 1,25 inch M3
1 x	Blue aluminium servo arm V1-Hitec 20 mm M2
1 x	aluminium servo arm V1-JR 1,0 inch M2
1 x	Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x	Rudder 2_Tray 4~4.5 inch
1 x	Red aluminium servo arm V2-Futaba 1,75" inch M3
1 x	Red aluminium servo arm V3-Futaba 1,25inch M3
1 x	Red aluminium servo arm V1-Futaba 20 mm M2
1 x	Blue aluminium servo arm V2-Hitec 1,5 inch M3
1 x	Gold aluminium servo arm V2-JR 1,0" inch M3
1 x	Red aluminium servo arm V3-Futaba 1,5inch M3
1 x	Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x	Blue aluminium servo arm V2-Hitec 2,0 inch M3
1 x	Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x	Red aluminium servo arm V2-Futaba 2,0 inch
1 x	Rudder 2_Tray 3.5~4 inch
1 x	Red aluminium servo arm V1-Futaba 23 mm M2
1 x	Red aluminium servo arm V3-Futaba 3,5inch
1 x	Starter Sullivan-STAR 601
1 x	Dust collector for mould cleaning
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	2,0x50 mm allen screwdriver
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Screwdriver for Hexagon 1,5mm
1 x	Z Bender - S Type Tool
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Digital scale up to 40 kg
1 x	Copier 5x20 cm pcs
1 x	3,0x60 mm allen screwdriver
1 x	Cut tube
1 x	Crimping tool
1 x	Copier 2x20 cm pcs
1 x	GameCommander USB Universal
2 x	RF9 Flight Simulator with Spektrum Controller
2 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Locking cable tie 4.6x203 (uds)
2 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
2 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	SUS wire 3m (nylon coated)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	1/6 Pilot "Cindy"
1 x	1/12 Pilot "Tom"
2 x	1/12 Pilot "Langley"
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Piloto JET 1:3,5
1 x	Civilian pilot "Joe" size 9cm (Slimline)
2 x	Piloto Jet "Red" 1/6 Scale
1 x	Pilot "Duke" Legends Series (Slimline)
3 x	Piloto RC Civil 1/5- 1/6 Scale 12"
3 x	Civilian pilot "Curt" size 9cm (Slimline)
2 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	1/10 Pilot "Jimmy"
1 x	Glases Nimbus
2 x	Glases Innovation Plus
1 x	Glases Moritz
2 x	Glases Nimbus "Black"
1 x	Glases Ace
1 x	Glases Aspen
1 x	Glases Stratus
1 x	Hovercraft sailcloth
1 x	Angled clevis with threaded rod M3
1 x	CM-3
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x	Blue aluminium double servo arm HITEC 40 mm M3 F3A
1 x	Servo BMS-4112
1 x	Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x	Rudder 2_Tray 3~3.5 inch
1 x	Propeller diller for EME35 and DLE35
1 x	Red aluminium servo arm V1-Futaba 15 mm iM2
1 x	MPX 8 pins plug mold
1 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	41x5,5 mm wires output (2 pcs)
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs)
1 x	Aramid fibre shears Proton®, 21 cm / 8" length
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	25 mm Sandpaper file
1 x	120x60 mm SLH KOVO wheel
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	Interface Jack Adapter IKARUS
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Window mounting channel 5m
1 x	Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x	Schul-Malpinsel Gr.5
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Heat Seal Iron
1 x	Allen wheel collar M3x3
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	100 mm rods + T patellas set for direction control
3 x	SIMtransmitter 6 Mode 2
1 x	Welder 100W/200V
1 x	Landing gear frontal support 29x26x13,5
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	Tool for entel
2 x	EasyFLY Addon
2 x	Interface Realflight Simulator
1 x	Pushrod octagone 3/2 with coupler M2
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Cockpit aluminium closing
1 x	Pushrod greyline 3/2 with coupler M2
3 x	Split M1,2x10 (10 pcs)
2 x	Snap long M2 (10 uds)
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Pistola termica MH 550 micro
1 x	Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x	EC-Cutter
1 x	Piloto jet 130 mm
3 x	1/12 Pilot "Cougar"
1 x	1/6 Pilot "Tony"
2 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	CORTEX
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
2 x	Aluminium wide washer M3 red (4 pcs)
2 x	12 mm floating pad (49 pcs)
2 x	Aluminium cap bolt washer M4 green (8 pcs)
2 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
2 x	Pilot JAN 1/4 Saiplanes
1 x	1/4 Pilot "Mike"
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
3 x	EDGE 540-A 91" (2310 mm)
2 x	EXTRA NG 85" 2159mm yellow/blue
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
2 x	EXTRA NG 85" 2159mm red/white
1 x	Sukhoi 29S 2,6 m Yellow/Black (SebART)
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	EXTRA 330SC-E 95" Orange/Blue/White
1 x	EXTRA 300 78" V3 Orange/Blue
1 x	Sukhoi 29S 2,2 m V2 YELLOW/BLACK (SebART)
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	SLICK 360-B 104" (2640 mm)
1 x	Servo BLS-M55B 61.2kg
1 x	ARS 300 91" ARF 2311mm ORANGE
1 x	Initior Transmitter FTX2 Wireless
1 x	Parachutist
1 x	Servo KST X10 MINI wing 10mm 23g 7.5Kg
1 x	Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x	Servo KST A08H V6.0 3,2Kg HV
1 x	Clip fixing for wing (2 pcs)
1 x	Snap pin for micro clevis (10 uds)
1 x	Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	Snap short M2 (10 uds)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x	Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Screw M3x20 (10 pcs)
1 x	Motor OS 3820-1200 electric
1 x	Motor OS 3805-1200 electric
1 x	Selfstarr EME35
1 x	Ignition bed V2 Red color
1 x	Extension Arm for Carburetor
1 x	Walbro carburetor for MVVS 26/30/35/40 cc
1 x	Encendido CDI RCAME 1/4*32 Single 120º
1 x	Suction funnel for carburetor WALBRO 20-80cc (blue)
1 x	RCEXL Electronic ignition twin A-02
1 x	GLOW 2C + accesories
1 x	Suction funnel for carburetor WALBRO 20-80cc (red)
2 x	Hexagonal Nut M3 (10 pcs)
2 x	M3 black washers (4 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Lock nut aluminium M2.5 (4 pcs)
1 x	Lock nut M2.5 (10 pcs)
1 x	Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x	Lock nut M5 (20 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x	Blind nut M8 (10 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x	Blind nut M4 (10 pcs)
1 x	Floating M4 washer pad (36 pcs)
1 x	Soporte servo KST X08/H and Plus
1 x	Servo KST X06H - 1.8Kg.cm 7mm 6g
1 x	Servo KST X10-710 V8.0 7.5Kg HV
1 x	Soporte servo KST X10 mini / DS135MG
1 x	Servo KST X20-7512 V8.0 82kg 8.4v
1 x	Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x	Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x	Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x	Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x	Servo KST X08 Plus 9g HV servo
1 x	Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
1 x	Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x	Servo KST X15-1208 V8.0 13.5Kg HV
1 x	Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x	Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x	DC Small for MultiLog & UltraLight
1 x	Landing gear axle Ø 8 mm (2 uds)
1 x	Triple rod con. 2mm Pushrod (2 pcs)
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	JETI Counter for DC-16 (Blue)
1 x	Program Card G2 RAY
1 x	3,9 mm ZG20-ZG38 servo arm
1 x	CA Glue fast 20g
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	CA Glue (medium) 20g
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	Glass Bubbles (0,12 g) 350 ml
1 x	DLE 30 complete electronic ignition
1 x	GLOW 9C + accesories
1 x	DA 85 / DA 100 / DA 100 L carburetor
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	EME 55 cc carburetor WALBRO
1 x	Starter EM Gear Power 80
1 x	Extension Arm for Carburetor (red)
1 x	Reed valve for DA 50-R
1 x	Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x	Suction funnel for carburetor 90D-M (red)
1 x	DLE 55 carburetor
1 x	Aluminium ignition bad (red)
1 x	Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x	Compact on-board starting system (9713)
1 x	Electromotor starter EME 35cc
1 x	Compact on-board starting system (9512)
1 x	Suction funnel for carburetor 90D-L (red)
1 x	Hose clips 6 mm
1 x	Aluminium ignition bad (blue)
1 x	Starter EM Gear Power 250
1 x	Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
2 x	Flat washer 2.2 mm (20 pcs)
1 x	Screw M2x6 (10 pcs)
1 x	Pan Head Screw M2x6 PH
1 x	Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Lock nut M6 (10 pcs)
1 x	Pan Head Screw M2x8 PH
1 x	Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x	Tapping Screw M2.2x9.5 (10 pcs)
1 x	Lock nut M3 (10 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Floating M3 washer pad (36 pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Anodized aluminium servo M3x16 screw (4 red pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
2 x	Lock washer 3.2 mm (20 pcs)
1 x	Pan Head Screw M2x8 PH countersunk head
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	2,3 mm Prop Drive Günther M4
1 x	Blind nut M5 (10 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Tapping Screw M2.9x13 (10 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Lock nut aluminium M3 (4 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
2 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Blind nut M2 (10 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
2 x	Hexagonal Nut M2 (10 pcs)
1 x	Screw M2x8 (10 pcs)
1 x	Hexagonal Nut M2.5 (10 pcs)
1 x	Blind nut M3 (4 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	10 mm floating pad (72 pcs)
1 x	Lock nut M2 (20 pcs)
1 x	Lock nut M4 (10 pcs)
1 x	Blind nut M5 (4 pcs)
1 x	Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Socket Screw M2x3 mm (4 pcs)
1 x	Lock nut M2 (10 pcs)
2 x	Flat washer 3.2 mm (20 pcs)
1 x	Pan head screw M2x16 PH
1 x	Lock nut aluminium M2 (4 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x	Blue Aluminium lock nut M2 (4 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	Tapping Screw M2.2x65 (10 pcs)
1 x	Circlik for shaft 3.2 mm (10 pcs)
1 x	Pilot "Goose" (Slimline)
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	1/12 Pilot "Fighter"
1 x	1/6 Pilot "John"
1 x	LASER 260 60" V2 ARF Yellow (SkyWing)
1 x	LASER 260 60" V2 ARF Red (SkyWing)

27,690.26EUR