Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

P-47 Thunderbird Deco 01
3,990.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Bidule 111 3000 mm, Cabina
1 x	Albatros, fuselaje (Top Model)
3 x	Medidor de incidencias
3 x	Bidule 55 2460 mm, Cabina
1 x	Cierre cabina tipo FOX MDM1 4m (1 par)
2 x	Tapa de servo estándar 90x60 mm
1 x	Tapa de servo micro-mini 50x45 mm
3 x	Astra Bayoneta (Top Model)
1 x	Avia, fuselaje reforzado en fibra de carbono(Top Model)
1 x	ARTIST 1.560 mm
2 x	Tapa de servo micro-mini 57 mm
1 x	Paracaidas rescate "RC-Evo-Cross"
1 x	Gracia Maxi ARF, fundas (Top Model)
1 x	Paracaídas P4
1 x	Cinta SURFACE 21mm x 5m
1 x	Tapa de servo mini 65 mm
1 x	Varilla carbono plana 1000x6.0x0.8 mm
1 x	Oratex Red Fokker 10 m
1 x	Ventus 2cx 4,5 m, Fuselaje
1 x	Varilla acero Ø 1,5 mm x 1500 mm
1 x	Cierre metalico para cabinas
2 x	Cono hélice plegable 30 mm diámetro / eje 3,2 mm
1 x	Oracover Rojo Ferrari (2 m)
1 x	Banda lijado g. 120 para BSL 220/E (5 pcs)
1 x	Cable Futaba voltaje externo para telemetria
1 x	Destornillador Allen 1.5 mm
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Barra pegamento caliente Negro
1 x	Cable carga bateria transmisor Multiplex 2x0,5 qmm (50 cm)
1 x	Adaptador (GP/KO hasta 4S) para CellPRO 4S
1 x	Siesta cola en T (Topmodel)
1 x	Suncover 100cc Red
1 x	Muleta Xpower H Prop Hub 5,0/20 mm + 2,5°
2 x	Soporte escape ø 25 mm
1 x	Set de Humo "Planeador"
2 x	Cono aluminio 30 mm / 3 mm helice plegable
1 x	Conector MR-60 (pareja)
1 x	Oracover Naranja 2 m
1 x	Adaptador 2 LiPos XH>EH
1 x	Varilla acero Ø 1,0 mm x 1000 mm
2 x	Servo TOPMODEL DS9010 T
1 x	Set cinturones Scale 1/4
2 x	Alicate para "Ball-Link"
1 x	Swift S1 De-luxe ARF 3.140 mm(TopModel)
1 x	Conexión de vacío VA 1 (para manguera Ø 6 mm)
1 x	Varilla carbono 16 mm x 1000 mm
3 x	Cono aluminio 34 mm / 3.17 mm helice plegable
1 x	Conector 2 mm macho (2 pcs) con conector de seguridad
1 x	Destornillador allen 1,5x50 mm molibdeno
1 x	Rueda NoNa 175 x 55 mm (2 pcs)
2 x	BULLIT 60 Ala 1095 mm
1 x	Aceite para hacer humo 3l Smoke
1 x	Oracover Gris claro 2m
1 x	Varilla carbono plana 1000x3.0x0.5 mm
1 x	Varilla carbono 1.5 mm x 1000 mm
1 x	Adaptador TP/TopFuel - XH 2/3S
1 x	Arrancador Sullivan-STAR 603 DINATRON
2 x	Conector CAN 15
1 x	PCARD sistema wireless
2 x	Cono autoventilado hélice plegable 40 mm diámetro / eje 4,0 mm
1 x	Astra (Top Model)
1 x	Conector banana oro 0,8 mm
1 x	Cono Alumin. hélice pleg. 30 mm diámetro / eje 5,0 mm
1 x	Cono hélice plegable 40 mm diámetro / eje 3,2 mm
1 x	Cartucho de humo Verde 65 g
1 x	Conector FUTABA Servo hembra BLUE silicon (10 pcs)
1 x	Junta stack Ø 25 mm DLE 55 ZDZ 50-100B2, 3W60/120B2, ...
1 x	Sistema salvaservos rueda delantera BIDULE 111
1 x	Ventanilla Velero Escala 1:2,4 / 1:2,6
1 x	Cartucho de humo Azul 100 g
1 x	Tubo carbono (L 1000 mm, Ø30 mm, Ø26 mm)
1 x	Conector JR/Uni Servo hembra BLUE silicon (10 pcs)
1 x	Varilla carbono plana 1000x3.0x0.13 mm
1 x	Oracover Amarillo CADMIO 10 m
1 x	Cable carga bateria transmisor Futaba 2x0,5 qmm (50 cm)
1 x	Copiador 5 unidades de 20 cm
1 x	Adaptador JST-XH
1 x	Conector JR Servo macho (10 pcs)
1 x	Adaptador TP/TopFuel - JST-EH 4/5S
3 x	Varilla acero Ø 5,0 mm x 1000 mm
2 x	DINAMOETRO S-1580
1 x	Iniciadores para AX-60 (5 pcs)
1 x	Rueda neumatica "ballon" 160 mm con rodamiento (2 uds)
2 x	Codo escape 90º ø 25 mm
1 x	Cable "Y" carga 4 mm (2 IN-1 OUT)
1 x	Cono aluminio autoventilado hélice pleg. 38 mm dia./eje 5 mm
1 x	Varilla acero Ø 2,0 mm x 1000 mm
1 x	Cono aluminio autoventilado helice pleg. 30 mm dia./eje 5.0 mm
1 x	Bancada servo ala 13 mm
1 x	Ventus 2cx 4,5 m, Cabling Wings
1 x	Adaptador 4 LiPos XH>EH
1 x	Varilla carbono 2.5 mmx1000 mm
1 x	Conector "T" 6-6-6 mm tubo bomba vacio
1 x	SWEET Electro ARF "fuselaje reforzado carbono" (Top Model)
2 x	Soporte trasero 7 mm para motor gasolina
2 x	Mini Clips para fijar Ala (2 pcs)
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	Oracover Verde 2 m
1 x	Horn control flaps (1 pcs)
1 x	Varilla carbono 10 mm x 1000 mm
1 x	Rueda NoNa 200 x 60 mm (2 pcs)
3 x	Tapa de servo estándar 90x75 mm
1 x	Ventus 2cx 4,5 m, Funda cabina
1 x	Varilla carbono plana 10.0 x 1.0 x 1000 mm
1 x	Oracover Azul Cielo 2 m
1 x	Cono hélice plegable 40 mm diámetro / eje 3,0 mm
1 x	Ventus 2cx 4,5 m
1 x	Cinta alerones 1m x 10mm
1 x	Copiador 2 unidades de 20 cm
1 x	Bisagra Cabina Discus 2c, 2a, Ventus 2cx (2 pcs)
2 x	Cabina Sweet / Siesta
1 x	Conector JAPAN G2 Set 5 pares
1 x	Conector FUTABA Servo hembra (10 pcs)
1 x	Conector banana oro 2 mm
1 x	Paracaidista
1 x	Bomba de vacio 12 CFM completa
1 x	Soporte escape ø 60 mm
1 x	CC 05
1 x	Bidule 111 3000 mm
1 x	Crimpadora
1 x	Varilla carbono 5.0 mmx1000 mm
1 x	Cartucho de humo Verde 100 g
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Conector BEC hembra (10 pcs)
1 x	Varilla carbono 6.0 mmx1000 mm
1 x	Albatros rojo/blanco (Top Model)
1 x	Varilla latón Ø 0,8 mm x 1000 mm
1 x	Oracover Blanco 2 m
1 x	Servo DITEX EL0510M
1 x	Aero frenos eléctricos para veleros 185 mm (2 pcs)
1 x	Brazo servo Alu eje 3 mm
1 x	Bancada para servo en Z
1 x	Varilla latón hexagonal Ø 3.5 mm x 1000 mm
1 x	Cilindro de aire 40 mm
1 x	Junta stack Ø 25 mm GP-61/123
1 x	Varilla acero Ø 1,2 mm x 1500 mm
1 x	CONO 125 mm GFK fijación con tornillo central
1 x	Sensor RPM Optico para Dinamometro
1 x	Cartucho de humo Verde 140 g
1 x	Cartucho de humo Blanco 140 g
1 x	Cono aluminio hélice pleg. 30 mm diámetro / eje 3,2 mm
1 x	Interruptor SPS 70V 100/200 A
1 x	Interruptor SPS 70V 140/280 A
1 x	SBEC 30 D
1 x	Prolongador 5 lipos conector JST/C
2 x	Junta stack Ø 28 mm DA75/150B2
1 x	Fascination 3600 mm, Profuncidad (Top Model)
1 x	Excavadora 966G II without electrics, without hydrauli
1 x	DINO Glider ARC
1 x	Arrancador EM Gear Power 80
1 x	Prelude ARF 2500 mm (TopModel)
1 x	Bancada trasera motor gasolina 38 mm
1 x	Gracia Maxi ARF (Top Model)
1 x	Banda lijado g. 180 "Carburo de Silicio" para BSL 220/E (5 pcs)
1 x	Gracia (Top Model)
1 x	Gancho de lanzamiento fijo
1 x	KABRIOLIN 3D Electrico 1.4m
1 x	Servo TOPMODEL STANDARD S3217
1 x	Varilla acero Ø 6,0 mm x 1000 mm
1 x	Tren retráctil neumático tripata (Jet Legend)
1 x	Centralita de control OPTOTRONIX Aurora-LCU
1 x	Varilla acero Ø 0,8 mm x 1000 mm
1 x	Chispometro glow 1.3 Ah
1 x	DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Alimentación doble)
1 x	Varilla acero Ø 2,5 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x	Cono autoventilado hélice plegable 40 mm diámetro / eje 5,0 mm
1 x	Cono hélice plegable 40 mm diámetro / eje 4,0 mm
1 x	Soporte ventral para AX-18/AX-60
1 x	Interruptor electronico RC 30 Amp
1 x	MAX BEC 2D plus EX
1 x	PSC 6
1 x	Paracaídas PV6 para F3J
1 x	Ventus 2cx 4,5 m, Winglets
2 x	Prolongador 5 lipos conector JST - JST/C
1 x	Interruptor Magnetico MULTIPLEX
1 x	Varilla silverlot 45% - 1,50x500 mm (2 pcs)
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Prolongador 2/3 lipos conector JST/C
1 x	Interruptor largo On/Off micro
1 x	Cono autoventilado hélice plegable 30 mm diámetro / eje 3,2 mm
1 x	Motor MIG AC 400 /14
1 x	Cono autoventilado hélice plegable 40 mm diámetro / eje 3,2 mm
1 x	Cono aluminio hélice pleg. 40 mm diámetro / eje 5,0 mm
1 x	SBEC Jeti
1 x	Swift S1 De-luxe JEPPESEN ARF 3.140 mm(TopModel)
1 x	Motor XPower XC 3522/5 LS
1 x	DG-303 ACRO 3750 mm, cabina
1 x	Motor Moki S 250 cc 5 cilindros
1 x	ASW 15 5000 mm (Airwold)
1 x	Motor MOKI 160 BVT boxer 4-stroke
1 x	Inversor de servo
1 x	Brazo servo "L" 65x49 mm (2 pcs)
1 x	Fox 4000 mm Airworld,marco cabina
1 x	Fox 4000 mm con flpas (Airwold)
1 x	DG-303 ACRO 3750 mm (Airworld)
1 x	Servo DITEX TD2612S
1 x	Tester servo Profesional
1 x	Brazo servo Alu 90º eje 3 mm
1 x	Fox 4000 mm (Airwold)
1 x	Motor Moki 100 BVT
1 x	Gobe R-26S (Airwold)
1 x	Kobuz 5000 mm (Airwold)
1 x	ASW 20 5000 mm con winglets (Airwold)
1 x	Motor Moki 180
1 x	Fox 4000 mm Airworld,cabina
1 x	Motor MOKI S 350 cc 7 cylinder
1 x	Motor Moki S 250 cc 5cyl con autoarranque
1 x	Controlador autoarranque MOKI S250
1 x	Varilla empujador MOKI S250 (1 pcs)
1 x	Brazo carburador con extension MOKI S250
1 x	Motor Moki S 400 cc 5 cilindros
1 x	Swift 5050 mm (Airwold)
1 x	Extension escape MOKI 50VT
1 x	Motor Moki S 500 cc 5 cilindros
1 x	Filtro aire MOKI
1 x	ASK 21 6.8m
1 x	Tubo admisión MOKI S250

66,647.74EUR