Top » Catalog » Motors & Turbines » Turbines » kerosene » XICOY Turbine » XIX95C

2,175.00EUR

Turbina XICOY X95 compact
[XIX95C]

Specifications
In the early 2000s, Wren Turbines launched the famous Wren44, the smallest engine available at the time. The diameter of the engine was only 76mm and in its earliest form, the MW44 developed 30N of thrust, later variants increasing to 50N. Its size quickly defined the standard in small engine class, and several manufacturers developed engines of similar size, increasing the power in every new model, currently within the market, this diameter engine covers a range of thrusts, 45N, 50N, 55N, and 70N.
The X95, as all Xicoy engines, push the limit well beyond our competitors, raising the power to 95N, almost 3 times the power of the original MW44 and with the added benefit of lower overall weight.
The X95 is of the same size of previous X90 and X85 engines, using all new internal parts like rotor, stator and combustion chamber.
Thanks to the FlexThrust technology, the X95 can be used in all aeromodels designed for the MW44 and similar engines of 45N to much bigger models needing up to 95N, greatly improving the choices when looking for your next plane! As with all Xicoy Engines our purpose designed X95 electronics offers an industry leading simple, lightweight installation. One of The biggest hurdles in Turbine Design is Specific Fuel Consumption (SPFC), the X95 has the lowest TSFC.
The engine is offered in Compact or Light versions.
Specifications PRELIMINARY
Thrust: Continuously adjustable from 45 to 95N (9,7kgf, 21,4 Lbf)
Size: 76mm diameter, 183mm long
Weight: 706g (1,56lb) engine only, 888g (1,96lb) total installed weight except battery
Rpm Range: 48,000 ... 175.000 RPM
Idle Thrust: 3.8N (0,4kg/0,85Lbf)
Fuel: Kerosene + 4% oil. Diesel allowed but not reccomended. Fuels containing Biodiesel not allowed.
Fuel consumption: 260g/minute (330ml/m) at 95N
Starter motor: High speed brush-less
Fuel pump: Digitally controlled brush-less pump
Telemetry: Jeti/Futaba/MPX/Core/Hott/FrSky/Spektrum and Bluetooth Android and IOS (optional modules)
Service interval: 25 hours
Reccomended battery: 2s Lipo/2200mAh reccomended. (3s Life compatible, not recommended). Battery not included
Other: Built in sensors for ambient temperature and atmospheric pressure to automatically adjust the engine performance

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
  Turbines->
    kerosene->
      Accesories
      Jet Central Turbines
      KingTech Turbine
      Oil
      PBS Turbines
      Smoke
      Spare parts JETCENTRAL
      Turbinas Jetsmunt
      XICOY Turbine
    Electric->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Electric Landing Gear ULTIMATUM 3.0 (Elektron Re
1,160.39EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	PropCover 16-20" (1 pcs)
1 x	Propeller MEJZLIK 20x13 Electric light (41 g)
1 x	Propeller MEJZLIK 20x10 Electric light (36 g)
1 x	PropCover 16-20" (2 pcs)
1 x	Z Bender - S Type Tool
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
2 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Hot Glue Stick BLACK
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Starter Sullivan-STAR 601
1 x	Ball Link Plier
1 x	Hot Glue Stick GREEN
1 x	Copier 2x20 cm pcs
1 x	Vacuum pump 12 CFM
1 x	Crimping tool
1 x	2,5x60 mm allen screwdriver
1 x	Digital scale up to 40 kg
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Dust collector for mould cleaning
1 x	Digital precision scale up to 2000 g
1 x	Vacuum pump P1-N
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Starter EM Gear Power 250
1 x	Screwdriver for Torx® TX6
1 x
1 x	Screwdriver for Hexagon 1,5mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Z Bender - S Type Tool
1 x	Crimping tool
1 x	Hot Glue Stick RED
1 x	Hexagonal ball head 2.0 x 50 mm
2 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
3 x	Straightened threaded rod M3 - 1m
1 x	Straightened rod Ø 1.0 mm x 1000 mm
2 x	Straightened rod Ø 8.0 mm x 1000 mm
2 x	Straightened rod Ø 2.0 mm x 1000 mm
2 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
2 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Jeti Black cap
1 x	Red smoke canister 140 g
1 x	PCARD Wireless System
1 x	AX-60 starters (5 pcs)
1 x	Green smoke canister 140 g
1 x	Yellow smoke canister 140 g
1 x	Blue smoke canister 140 g
1 x	Ventral support for AX-18/AX-60
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
2 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
2 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Vacuum bag, 1200 mm x 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Flat washer 2.7 mm (20 uds)pcs)
2 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Spring lock washer 2.6 mm (20 pcs)
2 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
2 x	Circlik for shaft 1.5 mm (10 pcs)
2 x	Flat washer 1.7 mm (20 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	PT 21x13 EL Propeller
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	21x14 Falcon electric carbon prop (64 g)
1 x	Propeller hub spacer 8/5.5
1 x	20x13 Falcon electric carbon prop (64g)
1 x	20x15 Falcon electric V2
1 x	Propeller 12x6 Falcon electric
1 x	19.5x13 Falcon electric 3-Blade carbon prop (54 g)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Oracover GREY Seafire Sea 2m
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
2 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
2 x	silverlot 45% - 1,50x500 mm solder rods (2 pcs)
2 x	Sealing Iron Sleeve PROF
2 x	Support pumb/filter Xicoy X45
2 x	Support Antena 2.4 Ghz (2 pcs)
2 x	Tapa estado carga XT-60 (6 pcs)
1 x	Spare round blades, 28 mm, pack/ 2 pcs.
2 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Starter EM Gear Power 80
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Sandpaper file 13 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
2 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Cierva C30 spanish decoration Stickers
1 x	LA500 pilot-seat set
1 x	Head lower part New
1 x	Nut M2
1 x	LA500 pre-rotation gear hub
1 x	Nut M2 securing
1 x	3,0x60 mm allen screwdriver
1 x	Servo Fork
1 x	Baering 3x8x4
1 x	LA500 ciclic lever
1 x	Complet landing gear
3 x	1,5x50 mm allen screwdriver
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Glass fabric 80 g/m² (silane, twill) 100 cm x 10m
1 x	Film release agent PVA 25 ml
1 x	M3 black washers (4 pcs)
1 x	Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x	Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x	Nut for mounting M5 (4 pcs)
1 x	Blue Aluminium lock nut M2 (4 pcs)
1 x	Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	15 mm floating pad (30 pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
2 x	Aluminium wide washer M3 red (4 pcs)
1 x	Foam plastic plates (310x210x3 mm)
1 x	Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x	Junta humo metalica G85 (DLE85/DLE170)
1 x	Junta humo metalica G61 (DLE55RA/DLE61/DLE120)
1 x	KAVAN Hand crank fuel pump
1 x	Junta humo metalica G30 (DLE30/DLE60)
1 x	PowerFuel RX V2 Fuel Pump
1 x	Pitts Muffler kit for CAP 21
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Motor DLE 200cc Premium Muffler
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	500 ml sealer (DOPE)
1 x	Threaded insert M4 (4 pcs)
1 x	Fiberglass plate 350x150x1.0 mm
1 x	Foam plastic plates (310x210x5 mm)
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Lock nut M4 (10 pcs)
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Lock nut M5 (20 pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	Carbon Non-Woven, 245 g/m² 125 cm x 20 m
1 x	Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x	Glass fabric 25 g (2 m²)
1 x	Foam plastic plates (310x210x8 mm)
1 x	Chopped glass fibre strands 3 mm
1 x	Hexagonal Nut M1 (10 pcs)
1 x	Treaded hexagonal socket insert M3 Br (4 pcs)
1 x	Glass fibre sleeve Ø 20 mm X 10m
1 x	Lock nut M6 (10 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Threaded insert M3 (4 pcs)
1 x	20,5x14,5 Falcon electric V2 (40 g)
1 x	Paint gun for sprays
1 x	Hobbylite Filler, Balsa colour
1 x	1000 ml sealer (DOPE)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Bungee HLG Premium
1 x	Soporte filtro FESTO (4 pcs)
1 x	Support Filtro FESTO
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Support conector MPX (6 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Support ECU Xicoy X-45
1 x	Angle support XT60 conector
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Tube support Ø 6mm (10 pcs)
1 x	Turbine CHEETAH 160 SE

15,462.52EUR