Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

21x14 BIELA propeller (3-blades) Pusher
89.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

12 x	Balsa panel 4.0x100x1000 mm
1 x	Balsa panel 2.0x100x1000 mm
2 x	Beech dowels 2.0 x 1000 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	Balsa panel 5.0x100x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
2 x	Birch plywood plate 600x300x3.0 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Balsa panel 1.0x100x1000 mm
3 x	Beech dowels 4.0 x 1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
2 x	A/C quality beech plywood 600x300x0.8 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Balsa panel 3.0x100x1000 mm
2 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	Towing hook <3m
1 x	Fixed launching hook
1 x	LOWER TOW HOOK
1 x	Tow hook for tug
1 x	Adjustable launching hook
1 x	Towing hook
1 x	SERVO HOLDER
2 x	Round Rod 1,5x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
2 x	Motor DLE 170 M- Paramotors
1 x	Motor DLE 200cc Std
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
2 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
2 x	Birch plywood plate 600x300x2.0 mm
1 x	Trailing edge BALSA 35x8x1000 mm
2 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	Dremel PERMAGRIT thin lime
1 x	Dremel PERMAGRIT 18 mm round lime
1 x	Parachute expulsion foam
1 x	ABS tube 3.0x2.0x330 mm
1 x	Ball link M2 (10 pcs)
1 x	2 LiPo XH>EH adapter
1 x	Decorative caps, multicoloured
1 x	Propeller hub spacer 8/5.5
1 x	40 mm 1/4" Race propeller (rigth hydropropeller)
1 x	Propeller G-Sonic 20x8
2 x	MZ-12, 6 Channel HoTT
1 x	Quick hose connector 6-4 mm
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Foreman, scale 1:32
1 x	POLARON EX 800w charger
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	Switch magnet for gas cap and magnet switch actuators
1 x	DPSI RV Mini 6 Magic with Gas-Cap switch
1 x	PowerBox PowerExpander SRS
1 x	Extension for SensorSwitch 60cm
2 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	Motor DLE 430 cc - Paramotors
1 x	2 piece mounting frame Battery 3200 / 4000
1 x	20x200 mm battery rings
1 x	SE Ring 480 mm (2 pcs)
2 x	SE Ring 330 mm (4 pcs)
1 x	Spinner NUT M4
1 x	SE Ring 300 mm (2 pcs)
2 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Spinner Alumin. fixed propeller 40 mm / 4,0 mm
1 x	Tape GFK 38 mm
1 x	SE Ring 360 mm (2 pcs)
1 x	Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Spinner Alumin. fixed propeller 40 mm / 3,2 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	MPX-Dean "T" Adapter
1 x	USB HLS prog. interface
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	SWTU2 switch
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	PowerBox Competition SR2
1 x	Filter Capacitor JR
1 x	Motor 2212 (1000KV) Quadcopter F450
1 x	AXI 2204 Multicopter
1 x	P 17×5.8 Prop-2PCS/PAIR
2 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	PowerBox Evo
1 x	Motor DLE 200cc Premium Muffler
1 x	DPSI RV Mini 5 (2008)
1 x	PowerBox MAG Sensor
1 x	Propeller set 400 (2R+2L)
1 x	OLED-Display for PowerBox Mercury SRS
1 x	PowerBox 12
1 x	PowerBox iGyro SAT
1 x	Emcotec SPS Magnetic Switch Actuator
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	MPS Gas-Cap-Powerswitch
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Covered closure or fairings
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Three-position switched channel, short
1 x	Multi-adapter balancer JST - TP
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Switching module high voltage SXH
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Locking cable tie 4.6x203 (uds)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Steering arm 16 mm Ø 4 mm
1 x	Screw-lock connector M2 (2 uds)
2 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Cabin latch Fox MDM1 4m (pair)
2 x	Canopy Latch
1 x	Locking cable tie 3.2x142 (uds)
2 x	Steering arm 16 mm Ø 3 mm
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Locking cable tie 2.5x100 (uds)
2 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	SUS wire 3m (nylon coated)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	POWER PEAK D7 EQ-BID 12V/230V-Duo Charger
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Propeller MASTER AIRSCREW 9x6
1 x	Propeller MEJLIK 28.5x12 S-3 Blades
1 x	Propeller Pleg CAM-Prop 8x6
1 x	Propeller APC 11x7 Glow/Gas
1 x	Propeller APC 11x5 Glow/Gas
1 x	FALCON 33X11W CARBON PROPELLER (GAS)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Tape GFK 50 mm
1 x	PSC 6
1 x	SPS 70V 140/280 A
1 x	Opto Gas Engine Kill Switch
1 x	Selfstart electronic switch
1 x	Multi-adapter balancer JST/C - TP
1 x	MAX BEC 2
1 x	Interruptor RX/Batterie
1 x	DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS
1 x	DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14
1 x	DUPLEX 2.4EX Central Box 320
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	Allen wheel collar M3x3
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	FALCON 24X10 CARBON PROPELLER (GAS)
1 x	Propeller MASTER 5,5x4
1 x	Propeller MASTER AIRSCREW 13x6
1 x	Propeller MEJLIK 22x10
1 x	6x4 tree blades propeller
2 x	DPSI RV Mini 6 (2008)
1 x	Optotronix X-Carrier
1 x	PowerBox Sensor V3 MPX/Jr
1 x	USB Interface Adapter
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	PowerBox SparkSwitch RS
1 x	SBEC 40
1 x	Electronic switch JETI SP06 Opto
1 x	Opto Gas Engine Kill Switch
1 x	Extension 5 lipos JST/C - JST
1 x	Epoxy QUIK-CURE™ 5 min (130g)
1 x	Extension 2/3 lipos JST - JST/C
1 x	MAX BEC 2D plus EX
1 x	Propeller MASTER 7x3
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	DPSI RV Mini 5 Magic
1 x	Combo lighting module with covering drop shape
1 x	Hose clamps 0.16-0.20in, (4 pieces)
1 x	Adapter 4,0 mm M8
1 x	3 mm Short Prop Adapter M5
1 x	10 mm dogdrive props
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Adapter 5,0 mm M8
2 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	PowerBox PROFESSIONAL
1 x	Glass Bubbles (0.12g) 400 G (aproxx 3.3 l)
1 x	Split M1,2x10 (10 pcs)
1 x	Split pin 1.6x16 mm (10 uds)
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x	Epoxy 40 min. 4kg (Hardener)
1 x	Epoxy 40 min (Hardener). 1 Kg
1 x	Epoxy Resin L + Hardener GL 1 (30 min)
1 x	Cinta Goldfix 1m
1 x	Epoxy 10 min 190g
1 x	Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har
1 x	Spikes Band (5 m)
1 x	Cockpit plastic closing
1 x	Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x	PSC 5
1 x	GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
1 x
1 x	Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x	Epoxy Casting Resin + Hardener "water-clear" (300 min)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
1 x	Thixotropic agent tin/ 15 g (approx. 350ml)
1 x	Cotton Flocks, bag/ 500 g
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Snap short M2 (10 uds)
1 x	Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x	Wing bolts M3 Steel screw blue (2 pcs)
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Pushrod octagone 4/3
1 x	Servo GO-1070MG 40 kg.cm 0.10s/60º
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	Pushrod octagone 3/2
1 x	Triple rod con. 2mm Pushrod (2 pcs)
1 x	M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs)

23,865.57EUR