1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Compact Silencer KOLM BX-155
2 x Engine Kolm BX-155-2 with starter
1 x Motor EME 70 cc with autostarter
2 x Selfstarr DLE55, EME55/60, DLA56, SE 55
2 x ZENOAH ZG26 SCM Marine Engine
1 x ZENOAH ZG 80B
1 x ZENOAH ZG 26SC with magneto ignition
2 x ZENOAH ZG 26SLH Helicopter Engine
2 x ZENOAH G270RC
1 x Reduction gear 2.8:1 for ZG 38 inline version
2 x ESC 40A. Opto starter Kolm
1 x Exhaust pipe BX 155 Left
1 x DLE 55 RA pipe plug
1 x Ignition KOLM BX-155-2 Engine
1 x OS Engine 105HZ-R Heli
1 x OS Engine 105HZ-R Heli with pipe 105
1 x OS 37 SZ-H, Connecting rod
1 x Cylinder EME 35 cc
2 x Pitts Mufflers EME 55/60 cc
1 x Glow starter with charger 230v
1 x Piñon motor autostarter 60cc
1 x OS 37 SZ-H, Bulon piston
1 x Motor EME 60 cc
1 x Dremel PERMAGRIT 18 mm round lime
2 x Cut tube
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x Ball Link Plier
1 x Fresa corte diamante Ø 2.3mm (bola)
1 x Dean-T Plug Mold
1 x Dremel 3000 130W
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x 22 mm Cut Disc Proxxon/Dremmel
1 x Fresa corte diamante Ø 1.0mm (bola)
1 x 55% silver electrodes (2 pcs)
2 x Digital precision scale up to 2000 g
2 x 
1 x Copier 2x20 cm pcs
2 x Boxed KIT OF 7 Rotary Burrs FINE
1 x Cable control set
1 x Brass control horn M2 long for wire (10pcs)
1 x Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x Horn 5/20 with M2 Bearing
1 x Tacometer mini ignition RCEXL
1 x Tufnol Choke Lever Arm d=4,7mm
2 x Stainless Steel Tuned Pipe for engines from 45 to 80 cc
1 x SE-M Filter
1 x Horn DU-BRO 1/2 (2 pcs)
1 x Horn 6/20 with M3 Bearing
1 x Horn DUBRO 1/2A
1 x 6 mm blue aluminium threaded horn with patella
1 x Horn 5/15 with M2 Bearing
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Stainless Steel Bend D 28x0,6mm
1 x Stainless Steel Bend D 25x0,5mm
1 x JETCENTRAL ECU LIFE BATTERY 3800 MAH
1 x Spark Ceramic JETCENTRAL
1 x Power Pack SE Series JETCENTRAL
1 x BlueCom™ Adapter (iOS)
1 x PowerBox DigiSwitch V2 MPX/JR
1 x PowerBox Competition
1 x Soldering tip for KAVAN soldering iron KAV66.8338
1 x Mini Lock Grips 2PCS
1 x Sealing Iron STANDARD
2 x silverlot 45% - 1,50x500 mm solder rods (2 pcs)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Tachometer HANGAR 9 digital
1 x Hot Glue Stick GREEN
2 x EC-Cutter
1 x Ignition for DA-35 (without pickup sensor)
1 x Cer clip DA-50R, DA-60 DA-100 DA-100L DA-120, 1 piece
1 x Gasket, from red carb carrier to crankcase DA-150L/170
1 x Reed valve cage with petals for DA 100/150
1 x Rear crankcase DA-50R
1 x FALCON 28X10 CARBON PROPELLER (GAS)
1 x EDGE 540-A 91" (2310 mm)
1 x 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B
1 x Propeller MENZ-S 18x6
1 x Propeller MENZ-S 17x6
1 x HDT Jet Central
1 x Electric starter BEE (old)
1 x Carburador OS (Type 40K) 46AXII
1 x One Way bearing for EME55 starkit with key
1 x Propeller pad and output shaft EME 55/60 cc
1 x Pick up EME 55/60 cc
1 x CDI EME 120cc
1 x PERMAGRIT Sanding Block 45° 140x51 mm
1 x Precision wrench L100 mm
1 x PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E
1 x Pistola termica MH 550 micro
1 x Crimping tool
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Starter EM Gear Power 80
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x 2,0x50 mm allen screwdriver
1 x Starter 12v (Max 90 and 15ccm)
1 x Screwdriver for Torx® TX8
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x Z Bender - S Type Tool
1 x 25 mm Sandpaper file
1 x Ball Link Plier
1 x Stainless steel silencer for DA 85/170
1 x Carb Carrier, red DA-85, DA-100L and DA-120
1 x Prop washer DA-50R/60/70
1 x Reed valve carrier, without reed valves DA-150L/170
1 x Cylinder for DA-85/170 (1 piece)
1 x Carburator spacer block DA-50R
1 x Gasket, from reed valve carrier to carb carrier DA-150L/170
1 x Ignition unit for DA-70/100/120/150/170/200
1 x Piston pin for DA50R/DA100
1 x Ignition for DA-50-R, DA-60, DA-85
1 x Crankshaft DA-120
1 x Cylinder DA-50R, DA-100, DA-100L
1 x 28x12 prop Super Silence
1 x 27x10 prop Super Silence
1 x 3-blades 20x12 carbon prop Super Silence
1 x 3-blades 24x12 carbon prop Super Silence
1 x Propeller MENZ-S 16x8
1 x Propeller MENZ-S 21x8 3-Blades
1 x Propeller MENZ-S 18x8
1 x Propeller MENZ-S 16x12
1 x ZENOAH/ZG 20cc
1 x Propeller MENZ-S 17x10
1 x Propeller MENZ-S 21x12
1 x Propeller MENZ-S 15x8 3 blades
1 x Propeller MENZ-S 19x12
1 x Fresa corte diamante Ø 2.7mm (bola)
1 x Selfstart electronic switch
1 x Screwdriver for Hexagon 1,27mm
1 x Propeller diller for DA50, DLE55 red
1 x Sensor Ignition RCEXL Universal
1 x Pitts Muffler for D.A. 100
1 x Stainless Steel Bend D 15x0,4mm
1 x Pitts Muffler for D.A. 120
1 x Stainless Steel Bend D 22x0,5mm
20,995.88EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies