1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Stainless Steel Bend D 18x0,5 mm
1 x Stainless Steel Bend D 25x0,5mm
1 x Canister combo DLE 120 cc
2 x Canister combo DLE 120 cc
1 x KS86 S-6 muffler up to 65cc
1 x Stainless Steel Bend D 20x0,6mm
1 x Pitts Muffler for D.A. 120
1 x Giant Scale Muffler D.A. 70 (2pcs)
1 x Selfstart electronic switch
1 x Silencer with rear exhaust MTW TDH 110
1 x Stainless Steel Bend D 22x0,5mm
1 x STANDOFF GAS ENGINE MOUNT 38 mm
1 x Canister combo DLE 55 cc
1 x Stainless Steel Muffler D.A. 35-70
1 x Extension Ø25mm x L: 60 mm
1 x Gasoline filter
1 x Silencer with rear exhaust DA-120
1 x Captador OS GT 33 cc
1 x L ELBOW 90º ø 25 mm
1 x Foam air filter Ø 48 mm, blue
1 x Glow/Gas/Smoke/Kerosene filter
1 x Stainless Steel Bend D 12x0,4mm
1 x Filetro gasoline filter Tillotson OW497
1 x Stainless Steel Bend D 28x0,6mm
1 x Stainless Steel S-Bend D25x0,5mm
2 x Porex gasoline filter
1 x Giant Scale Muffler D.A. 150 (2 pcs)
1 x Canister combo DLE 111 cc
1 x Giant Scale Muffler D.A. 170 (2 pcs)
1 x Tufnol Choke Lever Arm d=4,7mm
1 x Spring Clip 28 mm teflon tube
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Fueraborda RETRO
1 x Regulador Actro-Marine 80A
1 x Rigid coupling brass Ø 3 mm L: 20 mm
1 x La Capitania di Venetia accesories
1 x Wood anchor 30 mm (2 uds)
1 x La Capitania di Venetia 1:50
1 x Anchor 25 mm (2 uds)
1 x Vest clothes Hispano Aviación
1 x Aluminium blue ball links M3 V1 (10 pcs)
2 x Aluminium red ball links M3 V1 (10 pcs)
1 x 15 mm gas motor standoff
2 x 5 mm gas motor standoff
1 x Aluminium ignition bad (blue)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x TrainerCord (master-learner)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x APM2.6 Power module with 5.3V DC BEC
1 x BEC 3A FOXY
1 x CC 05
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x MOKI S250 Intake Bend
1 x 30 cm BEC cable (male)
1 x 50 mm gas motor standoff
1 x 15 mm floating pad (30 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x 10 mm gas motor standoff
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Motor OS 3820-1200 electric
1 x Electronic fog horn
1 x Propeller 11x4,7 SlowFlyer
1 x VIPER JET G2 Esq. 2 White/Red
1 x Motor ACTRO 28-3-1300
1 x 290 mm 8x4 M4 shaft ship
1 x 1804 2400KV Brushless Motor Qav 250 mini
1 x Propeller 9x4,7 SlowFlyer
2 x Propeller 3x2
1 x Propeller 9x7 SlowFlyer
1 x Propeller 3x3
2 x Propeller 8x4,3 SlowFlyer
1 x Propeller 8x4 Electric
2 x VIPER 1.7 Tailpipe + Fuel Tank 1500ml
1 x VIPER 1.7 Electric break wheels + structure
1 x Remolcador "Jonny Hafenschlepper"
1 x UBEC 6A KAVAN
1 x Magnetic Interruptor MULTIPLEX
1 x Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Servo slow down unit (0,7-14,7 sec )
1 x 120x60 mm SLH KOVO wheel
1 x PSC 6
1 x SPS 70V 140/280 A
1 x Interruptor SPS 70v 60/120A
1 x Extension 5 lipos JST/C
1 x Opto Gas Engine Kill Switch
1 x Extension 5 lipos JST - JST/C
1 x SWTU2 switch
1 x Red aluminium servo arm V2-Futaba 1,75" inch M3
1 x Red aluminium servo arm V3-Futaba 1,25inch M3
1 x Refueling Cap V3 Red
1 x 20 mm gas motor standoff
1 x Turbine HORNET 85 SE
1 x Extension 5 lipos JST/C - JST
1 x Connector Sub-D 2+5 Female
1 x Male Prolonger TP 4/5S
2 x Opto Gas Engine Kill Switch
1 x Multi-adapter balancer JST - TP
1 x SPS 70V 100/200 A
1 x Prolonguer for Balancer Thunder Power 6S
1 x Pins M connect Multipin connectors AWG 20-24
1 x SBEC 40
1 x MAX BEC
1 x Extension 6 lipos XH > EH
1 x PSC 5
1 x MAX BEC 2D plus EX
1 x Male/Female prolonguer for Balancer Thunder Power 6S
1 x PowerBox SparkSwitch RS
1 x Rudder 2_Tray 3~3.5 inch
1 x Red aluminium servo arm V2-Futaba 17 mm iM2
1 x 10 mm Quick clamp_L (6 pcs)
1 x 10 mm floating pad (72 pcs)
1 x Propeller 10x4,7 SlowFlyer
1 x VIPER JET G2 Esq. 3 Orange/Black
1 x Landing gear axle Ø 5 mm (2 uds)
1 x Landing gear axle 4x21 4 mm (2 uds)
1 x Landing gear axle Ø 8 mm (2 uds)
1 x Landing gear axle Ø 6 mm (2 uds)
11,699.28EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies