1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Motor DLE 170 M- Paramotors
1 x Motor DLE 200cc Std
1 x Small Crow DLE-170M
1 x Motor DLE 430 cc - Paramotors
1 x A/C quality beech plywood 600x300x1.5 mm
1 x Smoke set "Glider"
1 x Hot Glue Stick BLACK
1 x Pilot "Anthony" (Slimline)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Plasti Dip Liquid Tape 429 ml orange
1 x ABS tube 5.0x4.0x156 mm
1 x Silent-blocks DLE 170M
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
2 x Stickers-digit for marking
2 x Extractor piñones 2.3/3.2 mm
1 x Brake for 140 mm wheels
1 x Air pressure gauge
1 x Retract undercarriage for gliders up to 3,5 Kg
1 x Retract undercarriage
1 x Steel brush wheel with 2.35mm
1 x Propeller drill jig DA-35/50/60/70
1 x Hose connector stopper 4 mm
2 x Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x Faucet FESTO
1 x Wheel cover holder Ø 3 mm (2 uds)
1 x Windsock Ozone L - 700 mm
1 x Parachute BACKUP X100
1 x Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x Servo GO-10S41MG 10.5 kg.cm 0.075s/60º
1 x Parachute P4
1 x Servo Mount M (blue)
1 x Avia (Top Model)
1 x Bidule 111 3000 mm Canopy
1 x 57 mm micro-mini servo cover
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x Propeller diller for DA50, DLE55 red
1 x 100g Flux Paste for Silver Solder
1 x Propeller 8x4 Electric
1 x 65 mm mini servo cover
1 x Avia spare fouselage CF reinforced (Top Model)
1 x ALBATROS 3.0 m (orange/white)
1 x 11 mm wing servo holder
1 x 20 mm tail wheel for 0,5-1 Kg models
1 x 58 mm micro servo cover
1 x Avia spare blue cockpit (Top Model)
1 x Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair
1 x 7 mm gas motor standoff
1 x 30 mm Alu spinner 3 mm pleg. propeller
1 x Albatros ,spare cockpit (Top Model)
1 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x 50x45 mm micro-mini servo cover
1 x 13 mm wing servo holder
1 x Astra wing Joinner (Top Model)
1 x Angle of incidence meter
1 x Astra (Top Model)
1 x ACTIVE ARF Electric 1.995 mm
1 x 90x75 mm standart servo cover
1 x ARTIST 1.560 mm
1 x 18 mm wing servo holder
1 x BULLIT Wing 1095 mm
1 x Angle measurer
1 x 
1 x Sprung retractable undercarriage (Alfa model)
1 x Retract undercarriage for gliders up to 2 Kg
1 x Kit hydraulic brake
1 x Tool for entel
1 x PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x Propeller diller for DLE111 and DA85-150
1 x Digital weight, angle and balance meter BASIC
1 x Dean-T Plug Mold
1 x Modelling compound (Plastilin), sculptor's quality 1 Kg
1 x MPX 8 pins plug mold
1 x Tool for entel
1 x Propeller diller 5/6,3/8/9
1 x Adjustable launching hook
1 x Propeller 10x4,7 SlowFlyer
1 x Propeller 3x3
1 x Propeller 9x4,7 SlowFlyer
1 x Soldering tip for KAVAN soldering iron KAV66.8338
1 x Ply-Span 450x600/13g Blue
15,197.72EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies