Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Brazo servo MKS Doble Metal L:2.5/3 inc
26.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	DPS Switch Ampere
3 x	Cabel charger transmitter GRAUPNER
1 x	Connector Sub-D 2+5 Male
2 x	Dean "T" - Futaba Adapter
2 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
4 x	2 LiPo XH>EH adapter
3 x	4 LiPo XH>EH adapter
2 x	30 cm BEC cable (male)
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
2 x	DPS Switch JR/JR
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
3 x	CC 03
1 x	3 LiPo XH>EH adapter
3 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Cabling for Fox MDM1 wings
2 x	Copper lacquer wire Ø0,2 mm (5 m)
4 x	5 LiPo XH>EH adapter
3 x	Connector CAN 15
2 x	Circlick securite
1 x	CC 02
1 x	BEC 3A FOXY
2 x	"S" set for boats
1 x	"M" set
1 x	Ventral support for AX-18/AX-60
2 x	Parachute expulsion foam
1 x	White smoke canister 100 g
2 x	Smoke set "S"
1 x	Blue smoke canister 100 g
1 x	Green smoke canister 140 g
2 x	White smoke canister 65 g
1 x	Initior Transmitter FTX2 Wireless
1 x	Initior Receiver FRX2 Wireless
1 x	3l Smoke oil
1 x	"S" set for planes
1 x	White smoke bombs AX-9 (10 pcs)
1 x	Red smoke bombs AX-60 (5 pcs)
2 x	Smoke set "Glider"
1 x	Smoke set "M"
2 x	Red smoke canister 65 g
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	White smoke bombs AX-18 (5 pcs)
3 x	Remote electric ignition system
1 x	B4-0 rocket charges (6 pcs)
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Blue smoke canister 140 g
2 x	Yellow smoke canister 100 g
2 x	AX-60 starters (5 pcs)
1 x	CM-3
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
2 x	Angle measurer
2 x	WingFix ULTRA Black Edition
2 x	CC 05
1 x	Adapter lead MPX/EC3
2 x	Field folding model stand
2 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
3 x	30 cm BEC cable (female)
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	EasyFLY Addon
1 x	Interface Jack Adapter IKARUS
1 x	Cinta Goldfix 1m
3 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	SE Ring 350 mm (2 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	20x200 mm battery rings
1 x	SE Ring 330 mm (4 pcs)
2 x
1 x	Foil for sticking flaps and ailerons
1 x	SE Ring 300 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
2 x	Wing connector 8pin with pin strip, plug & socket
1 x	Connectors banna oro 3,5 mm (M/F)
2 x	XH female balance (3S) connector (2 pcs)
1 x	XH female balance (5S) connector (2 pcs)
1 x	Gold antispark 4 mm plug
2 x	XH male balance (3S) connector (2 pcs)
1 x	Gold antispark 5,5 mm plug
1 x	Connectors banna oro 4 mm (M/F)
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Connectors DEANS 4 pins (1 pair)
1 x	Connectors DEANS (T)
1 x	XH female balance (2S) connector (2 pcs)
2 x	XH female balance (4S) connector (2 pcs)
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	Connectors banna oro 2 mm (M/F)
1 x	Connectors banna oro 0,8 mm (M/F)
2 x	XH male balance (5S) connector (2 pcs)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	2 mm female connector (2 pcs) with safety connector
2 x	Extinguisher CO2 - 2 Kg
1 x	Premium servo extension 100cm
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension silicon 10 cm (Graupner)
1 x	Small aluminium horn red (2pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	White smoke bombs AX-3 (10 pcs)
2 x	PSC 6
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Yellow smoke canister 65 g
1 x	AX-60 starters (5 pcs)
1 x	Red smoke canister 140 g
1 x	White smoke canister 140 g
1 x	Green smoke canister 100 g
2 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
2 x	Double conector with JR adapter and 200 mm extension
2 x	Banna gold connector 2,5 mm (100 M/F pairs)
2 x	Extension 2/3 lipos JST/C
1 x	TP/TopFuel - XH 2/3S Adapter
2 x	Extension 2/3 lipos JST - JST/C
1 x	Extension 5 lipos JST - JST/C
2 x	XH male balance (2S) connector (2 pcs)
2 x	Conector Servo female 4 pines
1 x	Female connector for 10 pines AWG
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
2 x	Angle of incidence meter
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	UHU hart 35 g
2 x	SE Ring 360 mm (2 pcs)
1 x	Marker ties (20 pcs)
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x
1 x	Mounting frame MPX male connector
1 x	Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
1 x	SE Ring 450 mm (2 pcs)
1 x	MPX housing with flange (4 pcs)
2 x	Glass Bubbles (0,12 g) 350 ml
2 x	FOAM - CURE™ (24g)
2 x	Thixotropic agent TM 100, tin/ 415 g (approx. 5 l)
1 x	Screwdriver for Hexagon 1,27mm
1 x	Vacuum pump 12 CFM
1 x	Crimping tool
1 x	Ball Link Plier
1 x	Hot Glue Stick BLACK
1 x	Cut tube
1 x	Hot Glue Stick RED
1 x	Digital scale up to 40 kg
1 x	AXI 2814/10 V2 Long
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Protector Connector MPX (1 pair)
1 x	MPX PCB "4 Pins", 5 pieces
2 x	Servo Connector Brackets (10 pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	Kontronik connector (10 connectors, 5 pairs)
1 x	Protector Connector Dean-T (1 pair)
2 x	SE Ring 400 mm (2 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Tape GFK 25 mm
1 x	Soporte carbono MR30 (2 pcs)
1 x	Spikes Band (5 m)
2 x	SE Ring HACKER 300 mm (2 pcs)
1 x	MPX Support
1 x	Vacuum pump P1-N
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
3 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
2 x	Suncover 100cc Red
1 x	PowerBox SparkSwitch RS
1 x	SBEC Jeti
1 x	Three-position switched channel, short
1 x	MPX-Dean "T" Adapter
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Propeller balancer
1 x	Medidor ángulos y/o incidencias
1 x	Field folding model stand SebArt
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Short Switch On/Off micro
1 x	TrainerCord (master-learner)
1 x	Switching module high voltage SXH
1 x	VITAPROP CARBON FOLDING PROP 15x9.5"
1 x	Propeller POWER-PROP 7x7
1 x	EWC6 40 cm wing connector
1 x	Female connector for 6 pines AWG
1 x	Adapter lead MPX/XT60
1 x	MPX Sub-D Adaptor
1 x	Female connector for 12 pines AWG
1 x	Wing conexion 2 servos JR/Graupner 50 cm
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Female connector for 16 pines AWG
1 x	JETImodel SINGLE BEC
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	EWC3 40 cm wing connector
1 x	JETImodel DPS 40
1 x	Extension 6 lipos XH > EH
1 x	MPX Support (2 pcs)
1 x	Hacker X-Pro USB interface V2
1 x	Male connector for 12 pines AWG
1 x	Female connector for 20 pines AWG
1 x	Conector BEC male (10 pcs)
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	AXI 2826/12 V2
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Propeller balancer
1 x	Surface Indicator Gauge Small
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	Support FUEL DOT V3
1 x	SLICK 360-B 104" (2640 mm)
1 x	Conector JR Servo female (50 pcs)
1 x	Conector JR Servo female (10 pcs)
1 x	Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x	Conector JR Servo male (10 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Buy Perforated film 100 cm / 10 m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Battery charging cable XT60
1 x	Cotton Flocks, bag/ 500 g
1 x	Thixotropic agent tin/ 15 g (approx. 350ml)
2 x	Fresa corte diamante Ø 2.3mm (bola)
2 x	PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH
2 x	Rubber Insert hard, 1 Pcs.
2 x	Extra Hard Titanium Herxagon Screwdrivers
2 x	Heli blades angle measurer
1 x	Precision wrench L100 mm
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	Kwik link unmount tool

13,172.03EUR