Top » Catalog » Hardware » Servos » Hitec » ROIHS81MG

25.50EUR

Servo HITEC HS-82 MG
[ROIHS81MG]

The Hitec HS-82MG Metal Gear Micro Servo is one of Hitec's newest servos and related to the HS-81MG. The HS-82 MG micro servo has a fine balance between speed and torque. Hitec HS-82MG Metal Gear RC Servos are designed to be both economical and reliable. Metal Gears are recommended for strength and impact resistance.

Detailed Specifications:
- Motor Type: 3 pole ferrita
- Bearing Type: None
- Speed: 0,12 - 0,10 sec @ 60deg.
- Torque: (4,8v-6v) 2,8 - 3,4 kg.cm
- Size: 29,8x12x29,6 mm
- Weight: 19,00 g

temporarily out of stock

Reviews

Customers who bought this product also purchased

XPower H PROP HUB Ø6.0/42.5mm 0º temporarily out of stock	XT-90 connector (pair) temporarily out of stock	SE Ring 480 mm (2 pcs) temporarily out of stock
LiPo TopFuel ECO-X 5000 mAh 2s 35C MTAG temporarily out of stock	Sealing Iron Sleeve STD temporarily out of stock	Propeller APC 6x5.5 Electric temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

ULTIMATUM 2.0 PRO "Joker 7N"
2,900.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Paramotor Trike XL
2 x	Trike XL motor set (motor+esc+prop)
2 x	Parachute PV6 for F3J
2 x	Para-RC "RC-Evo-Cross" Rescue
2 x	Windsock Ozone L -1200 mm
2 x	MAX pilot ARTF
1 x	Parachute P4
2 x	LUCAS pilot ARTF
3 x	Paramotor BackPack XXS 2
1 x	Parachute BACKUP X100
2 x	Wing OXY 5,0 m2
1 x	Wing OXY 0,5 pulgadas2
1 x	CA Glue (medium) 20g
1 x	Ring 320 mm length (5 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Canopy Latch
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
2 x	Para-RC Trike "RC-Bullix"
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	20x200 mm battery rings
1 x	XH male balance (3S) connector (2 pcs)
1 x	PPM Encoder Module
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Oracover Azul Cielo 2 m
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Extinguisher CO2 - 2 Kg
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Blind nut M3 (4 pcs)
1 x	Profile ABS Square 3 x 1000 mm
1 x	Blind nut M2 (10 pcs)
1 x	6,4x1000 mm 2:1 black termoretract tube
1 x	Glass Bubbles (0,12 g) 350 ml
1 x	Tape GFK 25 mm
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Steering arm 16 mm Ø 4 mm
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	XH female balance (4S) connector (2 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Large flex hinge (12 uds)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Gold antispark 5,5 mm plug
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x	Profile ABS half cane 4x1000 mm
1 x	Blind nut M6 (4 pcs)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	12.7 mm 2:1 black termoretract tube
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Oracover CHROME 2m
1 x	SERVO HOLDER
1 x	Y Cable
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Conector BEC female (10 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Micro Tarjeta SD Rapid Rush 16 GB
1 x	Digital scale up to 40 kg
1 x	One touch canopy lock
1 x	TX 250 mW especial GOPRO
1 x	Gates hinge
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Hardener Aero EPH 161 (250 g)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Para-RC Mix
1 x	SE Ring 240 mm (2 pcs)
1 x	Micro flex hinge (12 uds)
1 x	XH female balance (2S) connector (2 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Marker ties (20 pcs)
1 x	MPX Sub-D Adaptor
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Windsock Ozone L - 700 mm
1 x	Connectors banna oro 3 mm (M/F)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Tape GFK 38 mm
1 x	5.8G Receiver Helical Antenna with protecting case (SMA plug) 12
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	DUPLEX 2.4EX Central Box 320
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Paramotor BackPack XXS (without accessories)
1 x	Blind nut M4 (4 pcs)
1 x	Profile ABS half cane 5.0x1000 mm
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x	Aramid 50 daN 50 m
1 x	Balsa panel 8.0x100x1000 mm
1 x	GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
1 x	Balsa panel 4.0x100x1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	GPS Logger Dymond
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x	Profile ABS half cane 3x1000 mm
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	BALSA triangular 10x10x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	ABS tube 9.0x8.0x1000 mm
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Thixotropic agent TM 100, tin/ 415 g (approx. 5 l)
1 x	DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x	Balsa panel 1.5x100x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	BALSA triangular 15x15x1000 mm
1 x	Tow hook for tug
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Cotton Flocks, bag/ 7 Kg

8,396.77EUR