1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Glases Nimbus
2 x Glases Nimbus "Black"
1 x Glases Stratus
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x Glases Aspen
2 x Xplorer3 anemometro
2 x Xplorer1 anemometro
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
2 x Profile ABS half cane 2.0x1000 mm
2 x L-Connector 4.0 mm x 1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x T-Connector 4.0 mm x 1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Round Rod 1,25x1000 mm
1 x Ball link M3 (6 uds)
1 x SE Ring 350 mm (2 pcs)
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x ABS tube 8.0x6.0x1000 mm
1 x Glases Innovation Plus
1 x Actuator Electric 25 mm
1 x Tailwheel for 20/60 size
1 x Metal ring front FEMA
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x Xplorer4 anemometro
2 x Propeller POWER-PROP 7x7
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
2 x Axle wheel with accesories
1 x Body for landing gear Ø 3 mm
1 x Nose leg 155 mm with wheels 70 mm
2 x 40 mm air cylinder
1 x Landing gear strap large (4 uds)
1 x Fail Safe air retract
1 x Body for landing gear Ø 4 mm
1 x Festo Adaptor Tygon Large/4mm
1 x Ventus 1:4 set of instruments
1 x Carbon plate 350x150x3.0 mm
1 x Profile ABS half cane 5.0x1000 mm
2 x Profile ABS Square 1 x 1000 mm
2 x U Profile ABS 8,0x4,0x1000 mm
1 x Profile ABS half cane 4x1000 mm
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
1 x Profile ABS Square 2 x 1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x Profile ABS half cane 8.0x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x Rubber profile 10-2 mm 2M
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
2 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x Stickers-digit for marking
2 x GM Propellers Spinner Scale ø 40mm Diameter, Motor shaft ø 6mm C
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Propeller Pleg CAM Carbon 15x8
1 x Xplorer2 anemometro
1 x Eje barco 450x4 mm M4
1 x GM Propellers Spinner Scale ø 42mm Diameter, Motor shaft ø 6mm C
1 x Telemetry interface ALTIS 12 cm
1 x Keypad ALTIS V4
1 x Altimeter Altis V4
1 x ABS angle 2,0x2,0x1000 mm
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x GM Propellers Spinner Scale ø 45mm Diameter, Motor shaft ø 6mm C
1 x GPS Altis
1 x USB interface ALTIS
1 x Altimeter Altis NAO
1 x Telemetry interface ALTIS 20 cm
1 x Telemetry interface ALTIS 6 cm
1 x Cyano INSTA - CURE™ (225g)
1 x ExtraCA Top
1 x Cyano SUPER - GOLD™ (12g)
1 x Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g
1 x Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x White gelcoat 1 Kg
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x Extender tip (6 pcs)
1 x Epoxy 30 min. 200g
1 x Cyano ULTRA - CURE™ (21g)
1 x Epoxy QUIK-CURE™ 5 min (130g)
1 x MEKP Harderner 100 g
1 x Epoxy FINISH-CURE™ 20 min (130g)
1 x Epoxy MID-CURE™ 15 min (130g)
1 x 120 mm leg for retract undercarriage with rotation sistem (1 pcs
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x resin-hardener package L-385 with hardener H-385
1 x resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x Epoxy SLOW-CURE™ 30 min (130g)
1 x Cyano INSTA - CURE™ Pocket (18g)
1 x Epoxy SLOW-CURE™ 30 min (260g)
1 x Adhesive epoxy structures RESOLTECH 3350 (1 kg)
1 x Mould Resin P 10 kg
1 x Debonder UN - CURE™ (30g)
3,865.01EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies