1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x SAVOX SH 0254 servo
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x Savox Brushless Servo SB-2271SG
1 x Carbon servo arms for HITEC HS 65 (4 pcs)
1 x Servos security connector (2 pcs)
1 x Horns set HS-65HB/MG, 5065MG
1 x 25 mm carbon servo arm
1 x Servo arms set HS-65HB/MG/5065MG
1 x MIG 29 3D RTF, Servo
1 x Servo arms set HS-60/81/85/5082MG/5085mg
1 x Fast attachment for servos (25 pcs)
1 x Servos wing assembly set HS 80/81/82/85
1 x Metal gear set for HS81MG/5082MG
1 x ABS Strip 1.5x6.0x1000 mm
1 x Strip 1,5x1,5x330 mm
2 x ABS Strip 1.0x5.0x1000 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x Strip 3,5x1,75x330 mm
2 x Xplorer4 anemometro
1 x Strip 2,5x1,25x330 mm
1 x Round Rod 2,5x1000 mm
1 x Round Rod 2,0x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
2 x Strip 2,0x2,0x330 mm
1 x Round Rod 3,0x1000 mm
1 x ABS Strip 1.5x2.0x1000 mm
1 x Round Rod 4,0x1000 mm
1 x Round Rod 1,0x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
2 x Xplorer2 anemometro
1 x BALSA triangular 6x6x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x BALSA trip 10x10x1000 mm
2 x OBECHI sheet 2.0x3.0x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
2 x BALSA triangular 8x8x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
2 x Walnut wood slat 3.0x3.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x 20x1000 mm Ring Strap Back To Back
1 x Servo KST X10-710 V8.0 7.5Kg HV
1 x Trailing leg 131 mm
1 x Nylon gear block Ø 6 mm (2 uds)
1 x Landing gear axle Ø 5 mm (2 uds)
1 x Landing gear axle Ø 4 mm (2 uds)
1 x Propeller POWER-PROP 7x7
1 x Nylon threaded block M6 (2 uds)
2 x Hose connector stopper 4 mm
1 x 28 mm tailwheel unit
1 x Air pressure gauge
1 x Nylon gear block Ø 3 mm (2 uds)
1 x Landing gear strap medium (4 uds)
1 x Quick hose connector 3-3 mm
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Neumatic retractable landing gear (Aero-Naut)
1 x Nylon gear block Ø 5 mm (2 uds)
1 x Angled clevis with threaded rod M3
2 x Mini neumatic retract 3 mm landing gear (Het-rc)
1 x Tail gear set (60-120 class)
1 x Body for landing gear Ø 4 mm
1 x Tail wheel for 8-12 kg models
2 x Check valve quick hose connector 4-4 mm
1 x Servo HITEC HS-55
1 x Xplorer1 anemometro
1 x Indoor landing gear set
1 x Metal gear set for HS85MG/5085MG
2 x 9x4.7 * 22x12 carbon propeller
1 x Birch plywood plate 600x300x1.2 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x Quick hose connector 4-4 mm
1 x FESTO connector M7 Quick 6 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Racor 4/3 mm
1 x Racor "Y" 3 mm
1 x Quick hose connector 4-4 mm
1 x FESTO connector M5 Quick 6 mm
1 x Tirpiz Battleship 1:200
1 x Propeller POWER-PROP 13x9
1 x Propeller POWER-PROP 12x6
1 x 10-15mm Servo Arm HITEC
1 x PT 16x10 E Propeller
1 x 20,5x14,5 Falcon electric V2 (40 g)
1 x Porpeller HUNTER 400
1 x Xoar Electric Beechwood Prop 12x6
1 x Xoar Electric Beechwood Prop 22x10
1 x Mini neumatic retract 4 mm landing gear (Het-rc)
1 x 4 mm Prop Adapter M6
1 x Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x 3 mm Prop Adapter M6
1 x Propeller electric carbon 9.5x6
1 x Propeller POWER-PROP 14x10
1 x Propeller POWER-PROP 14x8
1 x Porpeller HUNTER 480
1 x Aero-Master (Aero-naut)
1 x 6 mm Prop Adapter M8
1 x Propeller POWER-PROP 12x8
1 x Propeller POWER-PROP 15x8
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x Support XT60 conector (2 pcs)
1 x FOXY G2 C3530-700
1 x ABS tube 3.0x1.0x1000 mm
1 x 20-25mm Servo Arm
1 x IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x PPS-4D Propeller
1 x Support Filtro FESTO
1 x Tapa estado carga XT-60 (6 pcs)
1 x USB programador GO servos
1 x Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x Propeller electric carbon 9.5x5
1 x Axle for AXI 5325/xx motors
1 x Bearing ZZ 6x16x5 for AXI 5330/xx
1 x Axle for AXI 2217/xx motors
1 x Axle for AXI 4130 V2 motors
1 x Combo RAY C3542-1000 + ESC 60A
1 x 290 mm M5 Prop shaft
1 x ABS tube 16.0x14.0x1000 mm
1 x ABS rectangular profile 10x5.0x1000 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Servo KST X08 Plus 9g HV servo
2,749.27EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies