800.00EUR

Motor DLE 120 cc
[ROIDLE120]


Twin-cylinder power and efficiency

The DLE-120 delivers 50 pounds of static thrust—more than enough power for intense 3D maneuvers. Twin opposed cylinders reduce vibration and engine wear and increase performance.

Mufflers, standoffs and electronic ignition boost performance even further. The DLE-120 delivers the most punch at the lowest weight and the lowest price of any engine in its class. Pick up the DLE-120 and fly with performance-fueled confidence.

Features:
•Efficient, light design for a high power-to-weight ratio
•Light pistons for fast acceleration, excellent compression and low vibration
•CNC-machined parts for high performance and long life
•Sealed crankshaft bearings
•Improved piston and cylinder contact area for increased engine lifespan.
•Matched mufflers included for optimized power
•Two mufflers
•Electronic ignition module with spark plugs
•Standoffs
•Spiral wire wrap

Specifications:
Displacement: 120.0 cc (7.3 cu in)
Bore: 1.85 in (47 mm)
Stroke: 1.38 in (35 mm)
Total Weight: 6.13 lb (2781 g)
Output: 12 hp @ 7,500 rpm
Includes: Electronic ignition module, muffler, spark plug, standoffs, spiral wire wrap, connector safety clips.
Requires: unleaded gasoline, 2-cycle oil, ignition battery & propeller
Suggested Propellers: 26 x 10, 26 x 12, 27 x 10, 28 x 10

DLE-120 Technical Data:
Ignition Battery: 4.8-8.4 NiCd or NiMH, 6.6V LiFe or 2S LiPo pack
Gas/Oil Mix: 30:1
Replacement Spark Plug: DLEG1326
Static Thrust: 20.9 lb (9.5 kg) @ 328 feet altitude, 18.7 lb (8.5 kg) @ 1,800 feet altitude
Weight Breakdown: Engine: 5.08 lb (2306 g), Muffler 1: 3.6 oz (103 g), Muffler 2: 3.9 oz (111 g), Ignition Module: 5.3 oz (149 g); Miscellaneous: 4 oz (112 g)


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x SAVOX SH 0254 servo
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x Savox Brushless Servo SB-2271SG
1 x Carbon servo arms for HITEC HS 65 (4 pcs)
1 x Servos security connector (2 pcs)
1 x Horns set HS-65HB/MG, 5065MG
1 x 25 mm carbon servo arm
1 x Servo arms set HS-65HB/MG/5065MG
1 x MIG 29 3D RTF, Servo
1 x Servo arms set HS-60/81/85/5082MG/5085mg
1 x Fast attachment for servos (25 pcs)
1 x Servos wing assembly set HS 80/81/82/85
1 x Metal gear set for HS81MG/5082MG
1 x ABS Strip 1.5x6.0x1000 mm
1 x Strip 1,5x1,5x330 mm
2 x ABS Strip 1.0x5.0x1000 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x Strip 3,5x1,75x330 mm
2 x Xplorer4 anemometro
1 x Strip 2,5x1,25x330 mm
1 x Round Rod 2,5x1000 mm
1 x Round Rod 2,0x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x Strip 2,0x2,0x330 mm
1 x Round Rod 3,0x1000 mm
1 x ABS Strip 1.5x2.0x1000 mm
1 x Round Rod 4,0x1000 mm
1 x Round Rod 1,0x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
2 x Xplorer2 anemometro
1 x BALSA triangular 6x6x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x BALSA trip 10x10x1000 mm
2 x OBECHI sheet 2.0x3.0x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
2 x BALSA triangular 8x8x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
2 x Walnut wood slat 3.0x3.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x 20x1000 mm Ring Strap Back To Back
1 x Servo KST X10-710 V8.0 7.5Kg HV
1 x Trailing leg 131 mm
1 x Nylon gear block Ø 6 mm (2 uds)
1 x Landing gear axle Ø 5 mm (2 uds)
1 x Landing gear axle Ø 4 mm (2 uds)
1 x Propeller POWER-PROP 7x7
1 x Nylon threaded block M6 (2 uds)
2 x Hose connector stopper 4 mm
1 x 28 mm tailwheel unit
1 x Air pressure gauge
1 x Nylon gear block Ø 3 mm (2 uds)
1 x Landing gear strap medium (4 uds)
1 x Quick hose connector 3-3 mm
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Neumatic retractable landing gear (Aero-Naut)
1 x Nylon gear block Ø 5 mm (2 uds)
1 x Angled clevis with threaded rod M3
2 x Mini neumatic retract 3 mm landing gear (Het-rc)
1 x Tail gear set (60-120 class)
1 x Body for landing gear Ø 4 mm
1 x Tail wheel for 8-12 kg models
2 x Check valve quick hose connector 4-4 mm
1 x Servo HITEC HS-55
1 x Xplorer1 anemometro
1 x Indoor landing gear set
1 x Metal gear set for HS85MG/5085MG
1 x 9x4.7 * 22x12 carbon propeller
1 x Birch plywood plate 600x300x1.2 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x Quick hose connector 4-4 mm
1 x FESTO connector M7 Quick 6 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Racor 4/3 mm
1 x Racor "Y" 3 mm
1 x Quick hose connector 4-4 mm
1 x FESTO connector M5 Quick 6 mm
1 x Tirpiz Battleship 1:200
1 x Propeller POWER-PROP 13x9
1 x Propeller POWER-PROP 12x6
1 x 10-15mm Servo Arm HITEC
1 x PT 16x10 E Propeller
1 x 20,5x14,5 Falcon electric V2 (40 g)
1 x Porpeller HUNTER 400
1 x Xoar Electric Beechwood Prop 12x6
1 x Xoar Electric Beechwood Prop 22x10
1 x Mini neumatic retract 4 mm landing gear (Het-rc)
1 x 4 mm Prop Adapter M6
1 x Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x 3 mm Prop Adapter M6
1 x Propeller electric carbon 9.5x6
1 x Propeller POWER-PROP 14x10
1 x Propeller POWER-PROP 14x8
1 x Porpeller HUNTER 480
1 x Aero-Master (Aero-naut)
1 x 6 mm Prop Adapter M8
1 x Propeller POWER-PROP 12x8
1 x Propeller POWER-PROP 15x8
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x Support XT60 conector (2 pcs)
1 x FOXY G2 C3530-700
1 x ABS tube 3.0x1.0x1000 mm
2,385.08EUR
Manufacturers
Manufacturer Info
DLE Engines
Other products
Languages
Español English
Currencies