Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

21x14 BIELA propeller (3-blades) Pusher
89.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	SE Ring 400 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Spikes Band (5 m)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	SE Ring 200 mm (2 pcs)
1 x	Marker ties (20 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Tape GFK 50 mm
2 x	Cinta Goldfix 1m
1 x	20x200 mm battery rings
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Tape GFK 25 mm
1 x	Paramotor Trike XL
3 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	ABS tube 6.0x4.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
2 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
2 x	ABS tube 5.0x4.0x156 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
2 x	800TVL CMOS camera for FPV
1 x	USB Mini Camera endoscope
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Round Rod 1,5x1000 mm
1 x	Vasa model Catapult
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Red aluminium servo arm V1-Futaba 20 mm M2
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Servo Mount S (red)
1 x	Muffler DLE 20-RA
1 x	ZENOAH ZG 38 SC with Choke Carburettor
1 x	Reed valve carrier, without reed valves DA-150L/170
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Paramotor BackPack XXS 2
2 x	Opale Rucksack
1 x	Wing OXY 5,0 m2
1 x	MAX pilot ARTF
1 x	Wing OXY 0,5 pulgadas2
2 x	Aramid 50 daN 50 m
2 x	Parachute BACKUP X100
1 x	Set cintas unión paracaídas 145 cm
1 x	CC 11 Conector
1 x	Conector male bateria 1s Kavan/Walkera 10cm cable
1 x	Bag connector 2 mm
1 x	Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	USBCOM 5i
1 x	Hot Glue Stick GREEN
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Gasket carb - intake manifold for ZG 74B/ZG 80G
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Gasket, cylinder ZG 20
1 x	Exhaust gasket Valach 85
1 x	O-ring Saito FG-73 5cyl
1 x	Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Motor EME 70 cc with autostarter
1 x	Motor ST 7-160 B
1 x	Z Bender - S Type Tool
1 x	Baseplate servo
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Valvoline SynPower 2T, 1 Litre
1 x	Header ZG 45/62, "wide"
1 x	L ELBOW 90º ø 25 mm
2 x	P 17×5.8 Prop-2PCS/PAIR
2 x	T-Motor U7-V2.0 Kv420
1 x	Carburetor DLE 30
1 x	Rear crankcase DA-50R
1 x	Canister combo DLE 170 cc
1 x	Ignition for DA-50-R, DA-60, DA-85
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x	Motor NGH GF 150 R5
1 x	DLE-111 Crankcase V2 Conversion Kit
1 x	PCI-HV ignition conversion set with Zenoah rubber plug cap for Z
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Piston for DA-50R, DA-100, DA-100L
2 x	Aluminium-screw, M5x16mm Red
2 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Shirt Hispano Aviación
1 x	Cap Hispano Aviación
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	White silicone 0,25 qmm wire (100 m)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	White silicone 0,25 qmm wire (150 m)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Blind nut M2 (10 pcs)
1 x	Lock nut aluminium M3 (4 pcs)
1 x	Hexagonal Nut M4 (10 pcs)
1 x	SD HC 8 GB
1 x	3 mm metalic joint for DA-35 or DA-75 cilinder/elbow
1 x	Gasket, Carburetor DA-150/170
1 x	Gasket, from red carb carrier to crankcase DA-150L/170
1 x	Connectors banna oro 2 mm (M/F)
1 x	Prop hub for DA 150/200, old version
1 x	Prop hub screw DA85/100/120 & VM170/200/210
1 x	Helices DJI Mavic Air STEALTH "Black" (4x Ud)
1 x	Propeller POWER-PROP 7x7
1 x	Propeller 9x4,7 SlowFlyer
1 x	Propeller 3x2
1 x	Windsock Ozone L -1200 mm
1 x	Rescue 1,8m2 / BackPack
1 x	Cyanocrylate MD GA460 odourless 20g
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	Cabel charger transmitter GRAUPNER
1 x	30 cm BEC cable (female)
1 x	2 LiPo XH>EH adapter
1 x	Hexagonal Nut M1 (10 pcs)
1 x	Nut for mounting M2,5 (4 pcs)
1 x	Blue Aluminium lock nut M3 (4 pcs)
1 x	Lock nut aluminium M2.5 (4 pcs)
1 x	Blue Aluminium lock nut M2 (4 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Hexagonal Nut M2.5 (10 pcs)
1 x	Hexagonal Nut M2 (10 pcs)
1 x	Lock nut M4 (10 pcs)
1 x	Spring Clip 25 mm teflon tube
1 x	O-Ring for Carburetor screw DA85, DA-100L, DA-120
1 x	AXI 2204 Multicopter
2 x	Motor NGH GF30
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	4 LiPo XH>EH adapter
1 x	Exhaust gasket DA50R DA100 DA200
1 x	Aluminium-screw, M5x20mm Red
1 x	Metal gasket elbow/cilinder DA60R/DA120
1 x	Crankcase gasket DA-100
1 x	Metalic joint for DA-50R/DA100 cilinder/elbow
1 x	Nut for mounting M3 (4 pcs)
1 x	Motor NGH GT-17
1 x	Motor NGH GT-9 V2

18,462.33EUR