1 x | Cap Hispano Aviación |
1 x | Wing Joiner ULTIMATUM 2.0 m |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | Jeti Black cap |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
2 x | Pine wood slat 10x10x1000 mm |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Ferrita 27x14x7 mm |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Professional Servo tester |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | Quicklock washer 3 mm (10 pcs) |
2 x | Flat washer 3.2 mm (20 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Servo HITEC HS-225 BB |
1 x | Servo HITEC HS-5485 HB Digi |
1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Servo HITEC D625 MW |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Servo HITEC D645 MW |
1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Servo case HS-225MG/225BB/5245MG |
2 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Servo HITEC HS-5585MH |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | SSPS105 Super Hi-Power servo |
1 x | Servo HITEC D131 MW nano |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | Servo DITEX EL0510M |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Servo inverter |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | Servo TOPMODEL DS1413 T |
1 x | Motor rotor LA-500 |
1 x | Hovercraft sailcloth |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Ply-Span 450x600/13g Blue |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Oracover Verde 2 m |
1 x | Oracover Yellow CADMIO 10 m |
1 x | Oracover Red 2 m |
1 x | Oracover Black 2 m |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Oracover CHROME 2m |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | LA500 Autogyro |
1 x | Cierva C30 simulated motor |
1 x | Blade holder lower |
1 x | LUCAS pilot ARTF |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | Parachute P4 |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Partall paste 650 g |
1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
1 x | Servo HITEC HS-7954 SH Digital High |
1 x | Servo HITEC HSB-9370TH |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | BALSA triangular 15x15x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Servo HITEC HS-70 MG |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Transmitter Stick Ends V4 Blue/Silver - M3 (2 pcs) |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Spinner propeller pleg. 42 mm/6,0 mm/0º |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/5º |
1 x | Fuel line plugs (Silver) |
1 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
1 x | Blocking screws M6 gas engine |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Servo HITEC HS-75BB Retract |
1 x | FuelTank Cap (red) |
1 x | Servo HITEC HS-77 BB Low Profile |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Spinner propeller pleg. 30 mm/6,0 mm/0º |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | 1000 ml sealer (DOPE) |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Gold aluminium double servo arm V3-JR 3.5 inch M3 |
|
4,834.51EUR |