Top » Catalog » Hardware » Servos » Hitec » ROIHS635HB

25.75EUR

Servo HITEC HS-635HB Carbonite
[ROIHS635HB]

The HS-635HB utilizes the revolutionary “Karbonite ™” gear train. Karbonite ™ is four times stronger than our standard nylon gears and even after hundreds of thousands of cycles it does not show any signs of wear. With a powerful motor, and dual ball-bearing mounted output shaft, the HS-635BB offers plenty of torque and speed. If your application requires increased speed and torque, the HS-635BB is the perfect upgrade from a standard size servo.

Specifications
- Motor Type: 3 Pole
- Bearing Type: Dual Ball Bearing
- Speed: 0,18 / 0,15 sec @ 60 deg.
- Torque: 69,43 / 83,32 oz.in (4,8v/6v) 5,0 / 6,0 kg/cm
- Size: 1,59"x0,77"x1,52" 40,60x19,80x38,80 mm
- Weight: 1.76oz 50.00g

temporarily out of stock

Reviews

Customers who bought this product also purchased

Extension silicon 30 cm male (Futaba) temporarily out of stock	Extension silicon 30 cm female (Futaba) temporarily out of stock	Cabel "Y" 30 cm (Futaba) temporarily out of stock
Teacher-student connector T12FG/FX-30 temporarily out of stock	Servo HITEC HS-125 MG temporarily out of stock	Servo HITEC HS-225 MG temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Paramotor Trike XL
1 x	Para-RC "RC-Evo-Cross" Rescue
2 x	Paramotor BackPack XXS 2
1 x	Para-RC Mix
2 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Aramid 50 daN 50 m
1 x	Parachute P4
1 x	Ballast 700gr OPALE
1 x	Trike XL motor set (motor+esc+prop)
2 x	Set cintas unión paracaídas 145 cm
1 x	Wing OXY 0,5 pulgadas2
1 x	LUCAS pilot ARTF
1 x	Conector male bateria 1s Kavan/Walkera 10cm cable
3 x	BALSA trip 6.0x6.0x1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Digital precision scale up to 2000 g
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Conector BEC female (10 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
2 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x	Support Pitot JETI
1 x	BALSA triangular 15x15x1000 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Aluminium servo arm (2 uds)
1 x	Bungee HLG Premium
1 x	Aceite DELUXE turbine Jet Oil 1 litro
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	SERVO HOLDER
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Conector JR Servo male (50 pcs)
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Ferrita 14x8x5.5 mm
1 x	Servo HITEC HS-5485 HB Digi
2 x	Servo HITEC HS-311
2 x	Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x	Servo HITEC HS-225 MG
1 x	Servo HITEC D645 MW
1 x	Servo HITEC D950 TW
1 x	Servo HITEC HS-5085 MG Digi
1 x	Servo HITEC D-955 TW Titanium
1 x	ANGEL 48" pp red/blue/white
1 x	Pilatus PC-21 50E BLUE/WHITE (SebArt)
1 x	Motor DLE 430 cc - Paramotors
1 x	Towing hook
1 x	Locking cable tie 4.6x203 (uds)
1 x	Balsa panel 4.0x100x1000 mm
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Jeti Black cap
1 x	Aluminium wide washer M3 red (4 pcs)
2 x	A/C quality beech plywood 600x300x5.0 mm
1 x	SUS wire 3m (nylon coated)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Xplorer3 anemometro
1 x	Balsa panel 1.0x100x1000 mm
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Conector JR Servo male (10 pcs)
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Balsa panel 10x100x1000 mm
1 x	Support Filtro FESTO
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	AC-10 pre-rotacion with motor
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Z Bender - S Type Tool
1 x	Conector BEC male (10 pcs)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Support conector MPX (6 pcs)
1 x	Tube Pitot to PIXHAWK
1 x	30 cm MULTIPLEX female connector
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x	Support XT60 conector (2 pcs)
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Fixed launching hook
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Wing OXY 5,0 m2
1 x	Servo HITEC D954 TW
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	XH LiPo extension lead
1 x	Beech dowels 3.0 x 1000 mm
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	MPX PCB "6 Pins", 5 pieces
1 x	63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel
2 x	BALSA triangular 8x8x1000 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Connectors MPX 8 pins with support (black) 1 pair (male-female)
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Connectors MPX black female
1 x	Carbon plate 350x150x1.0 mm
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Blind nut M5 (4 pcs)
1 x	Spinner plastic white fixed propeller 51 mm
1 x	4 mm Prop Adapter M8
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Baering 3x8x4
1 x	BALSA triangular 6x6x1000 mm
1 x	RCEXL Electronic ignition twin CM-6
1 x	Horn 16,5x20 mm (2 pcs)
1 x	XT-60 connector (male)
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	XT60 Connector with Holder Male 2pcs
1 x	Foam plastic plates (310x210x2 mm)
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	63 mm INO spinner (carbon imitation)
1 x	58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel
1 x	70 mm INO spinner (carbon imitation)
1 x	Fuselage Autogyro RAINBOW
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	35x14 mm hard foam KOVO wheel (2 pcs)
1 x	41x5,5 mm wires output (2 pcs)
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	20x13 Falcon electric carbon prop (64g)
1 x	Birch plywood plate 600x300x4.0 mm
1 x	3 blades set
1 x	21x14 Falcon electric carbon prop (64 g)
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	Servo HITEC HS-70 MG
1 x	Servo HITEC HS-325 BB
1 x	Servo HITEC HS-5087 MH
1 x	Gear set HITEC HS-225
1 x	Servo case HS-225MG/225BB/5245MG
1 x	Servo HITEC HS-85 BB
1 x	Gear set HITEC HS-65 HB

13,394.78EUR