1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 
1 x Me-163
2 x Motor A2212/13T
1 x Angle of incidence meter
1 x Dean-T Plug Mold
1 x Digital precision scale up to 2000 g
1 x 800TVL CMOS camera for FPV
2 x Support ECU Xicoy X-45
1 x 38x4,5 mm wires output (2 pcs)
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Cable grommet Ø 4 mm (4 uds)
1 x 5 mm M2 variable horn
1 x Allen wheel collar M4x6
1 x 6 mm red aluminium threaded horn with patella
1 x Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
2 x Support Antena 2.4 Ghz (2 pcs)
1 x ABS tube 3.0x2.0x1000 mm
1 x ABS tube 6.0x4.0x1000 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x 28x5 mm wires output (2 pcs)
1 x ABS tube 7.0x5.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
2 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x Painting GHT Lexan Black 150 ml
1 x Plasti Dip Liquid Tape 429 ml black
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x ABS Strip 1.5x8.0x1000 mm
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x SE Ring 400 mm (2 pcs)
1 x BALSA trip 10x10x1000 mm
1 x Round Rod 2,0x1000 mm
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x 200 mm extensión servo HITEC/JR
1 x Strip 1,5x1,5x330 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x Gasket electric Fuel Pump
1 x Pushrod octagone 4/3
2 x Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs)
1 x Towing hook
1 x Tube support Ø 6mm (10 pcs)
1 x Tow hook for tug
1 x Support conector MPX (6 pcs)
1 x Towing hook <3m
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Extension PVC 150 cm (Graupner)
1 x 50 mm black plastic spinner for fixed propeller
1 x Extension silicon 35 cm male (Futaba)
1 x 1/10 Pilot "Jack"
1 x 1/12 Pilot "Fighter"
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Pilot JAN 1/4 Saiplanes
1 x Extension silicon 10 cm (Graupner)
1 x M3 Maxi ball link (2 uds)
1 x Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x Pushrod octagone 3/2
1 x Soporte grifo FESTO (2 pcs)
1 x Support pumb/filter Xicoy X45
1 x Recessed MPX connector support (6 pcs)
1 x Support FUEL DOT V3
1 x Aro pasacable Ø25 mm (4 pcs)
1 x LOWER TOW HOOK
1 x Towing hook
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Support Filtro FESTO
1 x Angle support XT60 conector
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x 1/6 Pilot "Garry"
1 x Extension silicon 25 cm (Futaba)
1 x 1/4 Pilot "Heidi"
1 x Futaba Female 40 cm extension
1 x Spinner plastic white fixed propeller 42 mm
1 x Pilot "Anthony" (Slimline)
1 x 1/6 Pilot "Cindy"
1 x Extension silicon 100 cm (Futaba)
1 x 1/10 Pilot "Jimmy"
1 x 36 mm black plastic spinner for fixed propeller
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x Cabel "Y" 30 cm (graupner)
1 x Extension silicon 25 cm (Graupner)
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Spinner plastic red fixed propeller 30 mm
1 x Extension 7.5 cm
1 x 1/12 Pilot "Langley"
1 x Pilot "Goose" (Slimline)
1 x 36 mm red plastic spinner for fixed propeller
1 x 42 mm white plastic spinner for fixed propeller
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Extension silicon 30 cm female (Futaba)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x Profile ABS half cane 7.0x1000 mm
1 x Rubber profile 10-2 mm 2M
1 x Profile ABS Square 1 x 1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x Profile ABS triangular 2.0x1000 mm 90º
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x Profile ABS half cane 8.0x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x ABS angle 6,0x6,0x1000 mm
1 x Profile ABS half cane 4x1000 mm
1 x Propeller Pleg CAM Carbon 12.5x7.5
1 x Propeller Pleg CAM Carbon 11x8
1 x Propeller Pleg CAM Carbon 11x4
1 x Propeller Pleg CAM Carbon 15x10
1 x Propeller CFK 18,5x12
1 x Propeller CFK 16x17
1 x Propeller APC 11x7 SF
1 x Radial mount for electric 2.5-5.6
1 x Axi for MVVS 3.5 Sport
1 x Propeller APC 10x10 Electric
1 x Motor 2212 (1000KV) Quadcopter F450
1 x ABS rectangular profile 10x5.0x1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x Profile ABS half cane 5.0x1000 mm
1 x ABS rectangular profile 12x6.0x1000 mm
1 x Rubber profile 6-2 mm 2M
1 x Profile ABS half cane 2.0x1000 mm
1 x Profile ABS half cane 4x2.5x1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x ABS angle 2,0x2,0x1000 mm
1 x Profile ABS Square 2 x 1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x Propeller Pleg CAM Carbon 16x10
1 x Propeller Pleg CAM Carbon 11x10
1 x Propeller Pleg CAM Carbon 12x11
1 x Propeller Pleg CAM Carbon 12.5x9
1 x Rubber profile 8-2 mm 2M
1 x Propeller CFK 11x8
1 x Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x Propeller APC 11x10 Electric
1 x Propeller APC 11x7 Electric
1 x Propeller APC 10x6 Electric Pusher
1 x Propeller APC 11x8 Electric
1 x Motor brushless 1806 - 2300 Kv Cuadracopter
1 x Wing bolts M3 Steel screw blue (2 pcs)
1 x STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Triple rod con. 3mm Pushrod (2 pcs)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
2,261.39EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies