1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Tubo carbono 3K-PW (Ø25 mm, Ø21 mm L:1000 mm)
3 x CC 11 Conector
1 x Conjunto bieleta 100 mm para dirección
1 x Varilla acero Ø 2,0 mm x 1000 mm
1 x Frenos Cuchillo 250 mm / 16 mm
1 x Pasacable de goma Ø 6.4 mm (4 uds)
1 x Prisionero allen M4x6
1 x Soporte abrazaderas 4.3 (4 uds)
1 x Piloto 1/6 "John"
1 x Rueda KOVO C SLH 120x60 mm
1 x Rueda KOVO SLH 120x60 mm
1 x Piloto 1/4 "Heidi"
1 x Rueda 127x43 centro aluminio Ø6.0 mm
1 x Taco goma 11 mm (14 pcs)
1 x Conjunto bieleta 90 mm y rótulas T. para dirección
1 x Mini Clips para fijar Ala (2 pcs)
1 x Pasacable de goma 9.5 mm (4 uds)
1 x Varilla acero Ø 8,0 mm x 1000 mm
1 x Plancha de balsa 4,0x100x1000 mm
1 x Fundas MB-339 (Alas-Profundidades)
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Alicate para "Ball-Link"
1 x Alicate para hacer "Z"
1 x Aceite DELUXE turbine Jet Oil 1 litro
1 x Antena Cloverleaf 5.8 GHz Tx - Rx
1 x Bayoneta de carbono cuadrada 5x5x220 mm
1 x Anemometro Xplorer1
1 x Barra pegamento caliente Negro
1 x Plancha de balsa 1,5x100x1000 mm
1 x Fundas de Luxe completas ASPIRE
1 x Listón triangular de BALSA 15x15x1000 mm
1 x PCM - Circuito protección bateria on-board 22.2v 6S
1 x Plancha de balsa 6,0x100x1000 mm
1 x Listón de BALSA 4,0x4,0x1000 mm
1 x Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
1 x Acumulador polvo para limpieza moldes
1 x Anemometro Xplorer4
1 x Autoarranque DLE 85/111/120 (motor incluido)
1 x Listón triangular de BALSA 6x6x1000 mm
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Fundas alas/cola ODYSSEY
1 x Fundas alas/cola ASPIRE
1 x Listón de HAYA redondo 10 mm x 1000 mm
1 x Plancha de balsa 8,0x100x1000 mm
1 x Liston de BALSA 8,0x8,0x1000 mm
1 x Arrancador 12v (Max 90 and 15ccm)
1 x Aceite para Bomba Vacio (1 litro)
1,504.71EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas