Servo Standard Digital
Servo digital estándar preciso con piuñones Karbonite con rodamiento. Debido a su bajo precio, es un excelente sustituto de los servos analógicos estándar con mayor empuje, una mayor fuerza de sujeción y opciones de programación - incluso en los modelos normales.
Programador servos digitales Hitec HFP-10 *, HFP-20, HPP-21 o HPP-21 Plus puede ser programado:
Programmable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points
Dimensions 1.59" x 0.77"x 1.48" (40.6 x 19.8 x 37.8mm)
Product Weight 2.1oz. (60g)
Output Shaft Style 24 tooth (C1) spline
Voltage Range 4.8V - 6.0V
No-Load Speed (4.8V) 0.18sec/60°
No-Load Speed (6.0V) 0.15sec/60°
Stall Torque (4.8V) 110 oz/in. (7.9kg.cm)
Stall Torque (6.0V) 131 oz/in. (9.4kg.cm)
Max PWM Signal Range (Standard) 750-2250μsec
Travel per µs (out of box) .079°/μsec
Travel per µs (reprogrammed normal res) .132°/μsec
Max Travel (out of box) 118.5°
Max Travel (reprogrammed normal res) 198°
Pulse Amplitude 3-5V
Operating Temperature -20°C to +60°C
Current Drain - idle (4.8V) 8.8mA
Current Drain - idle (6.0V) 9.1mA
Current Drain - no-load (4.8V) 400mA
Current Drain - no-load (6V) 500mA
Continuous Rotation Modifiable Yes
Direction w/ Increasing PWM Signal Clockwise
Deadband Width 8µs
Motor Type 3 Pole Ferrite
Potentiometer Drive Indirect Drive
Feedback Style 5KΩ Potentiometer
Output Shaft Support Dual Ball Bearings
Gear Type Straight Cut Spur
Gear Material 3 Metal Gears and 1 Resin Metal Gear
Wire Length 11.81" (300mm)
Wire Gauge 25AWG