1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x MAX pilot ARTF
2 x Rescue 1,8m2 / BackPack
1 x Set cintas unión paracaídas 145 cm
2 x Paramotor BackPack XXS 2
1 x Ballast 700gr OPALE
2 x Wing OXY 0,5 pulgadas2
1 x LUCAS pilot ARTF
1 x Para-RC Mix
2 x Parachute PV6 for F3J
2 x Opale Rucksack
1 x Para-RC Trike "RC-Bullix"
2 x Paramotor Trike XL
1 x Servo NARO Max Std
2 x SERVO DES 588 BB MG
1 x Swashplate metal LAMA
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Oracover Black 10 m
1 x Green smoke canister 140 g
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x M2 5Diam black ball link V2 (2 pcs)
1 x Ring 320 mm length (5 pcs)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x 15 mm reinforced hinge
1 x Fixed launching hook
1 x B4-0 rocket charges (6 pcs)
1 x Ferrita 27x14x7 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Long ball link M1.6 (6 uds)
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Extension 100 cm (Futaba)
1 x Ply-Span 450x600/13g White
1 x M3 Maxi ball link (2 uds)
1 x Profile ABS Square 2 x 1000 mm
1 x Futaba Female 40 cm extension
1 x Strip ABS 2.0x8.0x1000 mm
1 x Short ball link M3 (6 uds)
1 x Short ball link M2 (6 uds)
1 x 2,5x60 mm allen screwdriver
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Vacuum pump 12 CFM
1 x M2,5 5Diam black ball link V2 (2 pcs)
1 x Gates hinge aluminium (1 pcs)
1 x Extension PVC 150 cm (Graupner)
1 x Yellow smoke canister 100 g
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x ABS tube 5.0x4.0x156 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x 800TVL CMOS camera for FPV
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x 30 cm BEC cable (female)
1 x ABS tube 8.0x6.0x1000 mm
1 x Receiver GRAUPNER GR-12 HoTT
1 x Receiver GRAUPNER GR-16 HoTT
1 x VARIO module Hott
1 x BABY glider drawings (Aero-naut)
1 x X-RAY Micro QR (Elevator)
1 x Motor OS FS 75 AX
1 x Motor OS 3820-1200 electric
1 x OS 37 SZ-H, Crankshaft
1 x OS 40-FG 4T Motor
1 x Charger LiPo Charger4
1 x POLARON EX 800w charger
1 x IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x Crystal TX 35.050 Ch 65
1 x Crystal Universal RX 35.040 Ch 64
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Steel brush wheel with 2.35mm
1 x Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x Welder 100W/200V
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x silverlot 45% - 1,50x500 mm solder rods (2 pcs)
1 x Propeller diller for DA50, DLE55 red
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Tachometer Hyperion Multi-pala
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Large flex hinge (12 uds)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 
1 x Long pinned hinge (6 uds)
1 x Tool for entel
1 x Heat Seal Iron
1 x ROBART POINT HINGE 4,7mm (5 pcs)
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Angle measurer
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
2 x 4 LiPo XH>EH adapter
2 x 150 Newtons FEMA absorber
2 x Wheel collar 2 mm Ø (4 uds)
2 x Adapter lead MPX/EC3
2 x 3 copper lacquer wire Ø0,2 mm (1 m)
2 x Wheel collar 4 mm Ø (4 uds)
2 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x 2 LiPo XH>EH adapter
1 x Double conector with JR adapter and 200 mm extension
1 x Medidor ángulos y/o incidencias
1 x Truck-trailer for gliders 720 x 285 mm
1 x SERVO HOLDER
1 x DPS Switch JR/JR
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x BEC 3A FOXY
7,210.57EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies